On the back, we can locate the I/O shield with the respective connectors:

-19VDC

-2x USB 3.0

-DVI-I

-HDMI, eSATA

-RJ45

-2x USB 2.0

-Line Out

-Mic In

Some very useful ventilation holes can be also found on the bottom of the chassis:

Each rubber foot is surrounded by an aluminum ring, which makes an interesting contrast with the rest of the case:

The top side of the case comes with an indentation where we must place our nail in order to lift the top cover:

The insides of the computer are well organized, so the airflow is not blocked in certain places. The HDD is located inside a black metallic frame, and fixed on the chassis with two screws; next to it we can find the low profile CPU cooler and the SATA Data/Power cables are in the back. Opposite to the HDD mounting holes, we can see two identical ones, probably for installing a secondary HDD or SSD, but the metallic frame is not supplied:

Removing the HDD from its place reveals that it is made by CLOVERhitech Co., LTD, a 320GB model, 5400RPM with 8MB of cache:

The CPU cooler was made by Gelid, named Slim Silence iPlus and was specially designed to fit Intel's 775, 1156 or 1155 sockets. It is just 28mm high and can cool CPUs up to 82W TDP:

Next, the memory used was manufactured by MX Technology, model MXD3N13332GS SO-DIMM, rated at 1.5V, 1333MHz, CL9: