Wired Network

RJ45 connector supports Gigabit LAN at 10/100/1000 Mbit/s.

Intel i211 Ethernet Controller with MAC, PHY and PCIe interface

Supports Wake-on-LAN

 

Wireless Network (WLAN)

M.2-2230 WLAN card with Realtek RTL8188EE Controller

Supports IEEE 802.11b/g/n

Max. 150Mbps up-/downstream (1T1R) at 2.4 GHz

One external antenna supplied

 

LEDs and Buttons

Power button

Power LED (blue)

HDD LED (yellow)

 

Front Panel Connectors

2x USB 3.0

SD card reader

Audio line-out (headphones)

Microphone input

 

Back Panel Connectors

HDMI 1.4b digital video and audio output

DisplayPort 1.2 digital video and audio output

D-Sub/ VGA analog video output (15-pin) - no hot plug

4x USB 2.0

Gigabit network (LAN, RJ45)

2x RS232 serial port, 9-pin D-Sub (support of an auxiliary voltage of 5 / /12 V, the left port is switchable to RS422 / RS485), DC input for the external power adapter

4-pin connector (2.54 mm pitch) supports

- external power on button

- Clear CMOS function

- +5V DC voltage for external components

External WLAN antenna (perforation for second antenna available)

 

Other Onboard Connectors

Connector SPK1 (4-pin) supports two 2 W speakers

Connectors COM1/COM2 for serial ports (occupied)

Connector CN9 for supplied CMOS battery (type CR2032)

Jumper JP2 for power-on-after-power-fail (hardware solution)

 

Power Supply

External 40 W AC/DC power adapter (fanless)

AC Input: 100 ~ 240 V AC, 50 ~ 60 Hz

DC Output: 19 V / 2.1 A

Automatic voltage adjust

Dimensions: 89.5 x 37 x 26.5 mm (LWH)

 

DC Input connector

DC Connector: 5.5 / 2.5 mm (outer/inner diameter)

The DC-input of the computer supports an external power source with either 12 V ±5% or 19 V ±5%.

 

Supplied Accessories

Multi-language user guide (EN, DE, FR, ES, JP, KR, SC, TC)

VESA mount for 75 / 100 mm standard (two metal brackets)

Four thumbscrews M3 x 5 mm (screws together VESA mount and PC)

Four screws M4 x 10 mm (to affix VESA mount on the PC)

Four screws M3 x 4 mm (to mount a 2.5" storage into the bay)

Driver DVD (Windows 64-bit)

External 40 W power adapter with power cord

 

Optional Accessories:

- PS02: optional stand for vertical operation

- CXP01: adapter cable for external power button

- PRM01: 2U rack-mount front plate for two Shuttle XPC slim PCs

- WWN01: adapter plus 2 antennas & cables supports one M.2 LTE module and one SIM card

 

24/7 Nonstop Operation

This device is approved for 24/7 permanent operation.

Requirements:

- Free air circulation around the PC must be guaranteed.

- Ventilation holes must be kept clear.

- Any installed disk must also be approved for permanent operation by its manufacturer

 

Environmental Specifications

Operating temperature range: 0 ~ 40 °C

Relative humidity range: 10 ~ 90 % (non-condensing)

 

Certification and Compliance

EMI: FCC, CE, BSMI, RCM, VCCI, RED

Safety: CB, BSMI, ETL

Other: RoHS, Energy Star, ErP

This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:

(1) 2004/108/EC relating to electromagnetic compatibility (EMC),

(2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD),

(3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP),

(4) 1999/5/EC related to Radio and Telecommunications Terminal Equipment (R&TTE)