Sunbeamtech Light Bus:Sunbeamtech has been busy working on new product launch lately. A few weeks ago we looked at two of their latest gaming cases
Transformer and
Samurai together with some of their latest
CCFL lightings. Today, we are looking into another two new products from Sunbeamtech: Light-Bus and Laser LED.
First the Light-BusDespite the busy look panel, there are namely 7 functional buttons:
- The four big knobs – tuning the knobs from left to right increases the voltage input.
- The smaller knob on the lower right is to adjust the sound input sensitivity.
- Alt1 and Alt2 serve as “Mode Change”.
- HDD – activate the particular channel to flashing mode according to Hard Drive activity.
- Sound button – turn on the particular channel in accepting sound activation.
- ST is for fading in/out.
- On is for FAN control.
Here is a better picture to get to know them buttons.
The Connections:
From the far left:
4-pin molex power connector from Power Supply to Light Bus.
Sound input jack.
Two-pin Hard Drive light from motherboard header.
Four sets of 3-pin connection from either Fans or Lights.
Included in the package:
As indicated above, here you find the sound plug, the 4-pin Molex Power input, four sets of device inputs and the HDD 2-pin connector. Notice the four sets of device inputs are equipped with 4-pin, 3-pin and 2-pin connectors. The last one is for CCFL converter. A single sheet of manual printed on one side with hard to read diagram will be the only direction you are getting.
Okay, play time is next ->