This repository contains everything to set up a CoreOS Kubernetes cluster in Virtualbox using Vagrant just the same way as is done in the baremetal clusters at source{d}. As described in more detail in the coreos-baremetal-demo repo. This is meant to be a playground to experiment with changes to the setup of baremetal clusters without having to deploy it on actual machines. The setup is as much the same as a production setup as possible. There are security compromises made (set passwords, private keys exposed) in this setup to make it easy to set up, you should never use these files to set up a production cluster without modifications.

There are 2 types of machines, the Provisioner will serve DHCP and Ignition configuration (via Matchbox), it also is responsible for running all scripts to set up the systems. This one runs Ubuntu 18.04. In this setup it also acts as a NAT router between the Virtualbox NAT and the internal PXE network. The controllers will boot from the PXE profile served through the provisioner, the controllers only have an interface to the PXE network with a fixed MAC. The controllers will start a kubernetes and etcd cluster, note that there is no persistent disks set up by default so all data is stored in RAM. There are 3 disks in the VM which are used to experiment with RAID setups and disk partitioning.

                                                 +--------------+
                                                 | Controller 1 |
                                                 +--------------+
+-------------+                                  +--------------+
| Provisioner | <---> internal pxe network <---> | Controller 2 |
+-------------+                                  +--------------+
                                                 +--------------+
                                                 | Controller 3 |
                                                 +--------------+

You need:

• Vagrant
• Virtualbox 5+ (only Virtualbox is supported for now)
• VirtualBox Extension Pack (for PXE support)
• A copy of this repo
• Enough memory to run the VMs (1GB for the provisioner, 2GB per controller)

This repository contains a box contains which an empty VM configured to boot PXE and has 3 500GB (empty) SATA disks connected as well as 1 100GB disk which is formatted ext4 for CoreOS to install itself on. Which was created as an empty Virtualbox VM with PXE configured using the VirtualBox Extension Pack and packed using vagrant package. The boot disk is added for for allowing this setup to work on a single machine and is not present in production environments usually.

Run the VM:

~$ vagrant up

Make sure you have ports 2211,2212,2213 free, keep counting if you add more than 3 CoreOS VMs. These are proxies ran on the provisioner VM to trick vagrant into SSHing into the CoreOS VMs even though these are set up not to have a NAT interface (conflicts with the setup due to DHCP).

On boot of the provisioner VM it will provisioner it will provision itself using Ansible and configure Matchbox using the Terraform files in this repo. To make changes you can either destroy the cluster of use vagrant provision to apply both Terraform and Ansible changes.