SALM Industrial Solutions

There are many more components associated with e-mobility that need to be tested for leaks. This includes the charging plugs, which are used in all weathers. If you have any questions about how charging plugs can be tested for leaks, we will be happy to advise you. Please contact us at sales@salm-solutions.com #industrialengineering #qualityassurance #engineers #testcriteria #production #tightness #mechanicalengineering #emobility #development #automation #automotive #automotiveindustry #jwfroehlich #production #measurement #processautomation #serialproduction #eoltest #technology #test #qualitymanagement

As a vehicle owner, you don't think about what measures are required in automotive production to guarantee the desired quality. This makes it all the more important for design engineers to think about how individual parts and components can be tested in their installed state as early as the vehicle development stage. Vehicle roof antennas are of central importance for the reception of radio, GPS and mobile phone signals. The antenna base is usually glued to the vehicle roof. The antenna base or fin antenna must be leak-tight to prevent water from flowing into the vehicle interior and causing damage. Leak test panels from JW Froehlich are ideal for quality assurance. If sufficient time is available for the test, the pressure decay method is suitable, but if the cycle time is limited, the mass flow method is a good choice. In both cases, a bell is placed over the antenna, which is pressurised with compressed air. If there is a leak, this can be recognised by a drop in pressure within a certain time. If you have any questions about testing roof antennas with leak test panels from JW Froehlich, please do not hesitate to contact us! You can reach us at sales@salm-solutions.com #industrialengineering #qualityassurance #engineers #testcriteria #production #tightness #mechanicalengineering #emobility #development #automation #automotive #automotiveindustry #jwfroehlich #production #measurement #processautomation #serialproduction #eoltest #technology #test #qualitymanagement

#Hydrogen has great potential as an #energy source for the #mobility of the future. To ensure the safety and efficiency of this technology, it is essential that all components of hydrogen-powered vehicles are absolutely leak-proof. Here are some examples of leak testing of various components: Pressure tanks Hydrogen is stored under very high pressures in order to achieve a high energy density. The design of the pressurised tanks must be able to withstand the various loads during operation. They are tested for leaks before use. Bipolar plates for fuel cells These components are crucial for the efficiency of fuel cells. Leak test panels from JW Froehlich Maschinenfabrik GmbH can be used to check whether the bipolar plates are absolutely leak-proof and whether there are any leaks. Cooling system The cooling system must also be checked for leaks, as the functionality of the other components depends on it. Quality assurance Leak testing is an essential part of quality assurance. It ensures that hydrogen vehicles can be operated safely without causing hazardous situations. If you have any questions or are interested in an device demonstration, please contact us:  sales@salm-solutions.com #sustainability #innovation #industrialengineering #qualityassurance #engineers #testcriteria #production #tightness #mechanicalengineering #emobility #development #automation #automotive #automotiveindustry #jwfroehlich #production #measurement #processautomation #serialproduction #eoltest #technology #test #qualitymanagement

No matter how complex.... The electric drive unit is an essential component of an electric vehicle that requires high standards of quality and reliability.  It is therefore important to ensure the tightness of all components such as the electric motor, gearbox and thermal management.  For this purpose, we offer you the 500 series leak test panels from JW Froehlich, which have a CAN bus interface and therefore enable flexible control of sensors and valves.  This allows to design and carry out even complex test sequences according to your individual requirements. We will be happy to advise you on how to find the optimum solution for your electric drive unit with the series 500 leak test panels from JW Froehlich. Just get in touch with us! sales@salm-solutions.com #industrialengineering #qualityassurance #engineers #testcriteria #production #tightness #mechanicalengineering #emobility #development #automation #automotive #automotiveindustry #jwfroehlich #production #measurement #processautomation #serialproduction #eoltest #technology #test #qualitymanagement

At the end.... of traction battery production, leak testing is a key quality assurance measure. This is necessary because the battery must be sufficiently leak-proof throughout its entire lifetime.  There are various methods for leak testing, which are suitable in different ways depending on the required leak rate. The methods that use air as the test gas are significantly cheaper than those that use helium as the test gas. However, smaller leak rates can be detected with a helium sniffer test, for example.  It is therefore important to carefully consider which method is most suitable for the specific test object. If you have any questions about leak test panels from JW Froehlich, please do not hesitate to contact us! You can reach us at sales@salm-solutions.com #industrialengineering #qualityassurance #engineers #testcriteria #production #tightness #mechanicalengineering #emobility #development #automation #automotive #automotiveindustry #jwfroehlich #production #measurement #processautomation #serialproduction #eoltest #technology #test #qualitymanagement

We wish our customers and partners a successful new year and look forward to continuing our good co-operation. In the new year, we will continue to be at your side in the proven manner if you have any questions about leak testing.  You can contact us at sales@salm-solutions.com #industrialengineering #qualityassurance #engineers #testcriteria #production #tightness #mechanicalengineering #emobility #development #automation #automotive #automotiveindustry #jwfroehlich #production #measurement #processautomation #serialproduction #eoltest #technology #test #qualitymanagement

When cool is no longer cool 🌡 Thermal management is a key factor in the performance and efficiency of electric vehicles. It ensures that the traction battery operates in an optimum temperature range and that the passenger compartment is kept at a comfortable temperature. To ensure this, many components such as the refrigerant compressor, coolant pump, radiator, thermostat and control unit must work together perfectly and be leak-proof. Leak testing is therefore an important step in quality assurance. With the MFL500 series leak test panels from JW Froehlich, you can perform even complex tests and ensure that your products meet the highest standards. If you would like to find out more about how we can support you with your leak testing of thermal management components, please contact us. sales@salm-solutions.com #industrialengineering #qualityassurance #engineers #testcriteria #production #tightness #mechanicalengineering #emobility #development #automation #automotive #automotiveindustry #jwfroehlich #production #measurement #processautomation #serialproduction #eoltest #technology #test #qualitymanagement

Hard to believe! Yes, it really is hard to believe, but the MFL500 leak test panel from JW Froehlich is THE device with which all components for e-mobility can be tested for leaks. Whether traction battery, cooling circuit or charging plug - the MFL500 masters all testing tasks.  Would you like to find out more? Contact me to arrange an appointment for a device demonstration. sales@salm-solutions.com #industrialengineering #qualityassurance #engineers #testcriteria #production #tightness #mechanicalengineering #emobility #development #automation #automotive #automotiveindustry #jwfroehlich #production #measurement #processautomation #serialproduction #eoltest #technology #test #qualitymanagement

SALM Industrial Solutions is your contact and sales partner in Mexico for JW Froehlich leak test panels. If you would like advice or a written quotation for a leak test panel, our experts are at your disposal. We also carry out calibrations of leak test panels on behalf of our customers. Please contact us at  sales@salm-solutions.com #industrialengineering #qualityassurance #engineers #mechanicalengineering #emobility #automation #automotiveindustry #qualitymanagement