The European Committee for Standardization is one of three European Standardization Organizations (together with CENELEC and ETSI) that have been officially recognized by the European Union and by the European Free Trade Association (EFTA) as being responsible for developing and defining voluntary standards at European level.
CEN/TC 165 |
- |
Waste water engineering |
Project reference, Title
|
Publication date
|
Sales Points
|
---|---|---|
CEN/TR 12566-2:2005
(WI=00165139) Small wastewater treatment systems for up to 50 PT - Part 2: Soil infiltration systems |
2005-06-15 | |
CEN/TR 12566-5:2008
(WI=00165150) Small wastewater treatment systems up to 50 PT - Part 5: Pre-treated Effluent Filtration systems |
2008-11-05 | |
CEN/TR 1295-2:2005
(WI=00165134) Structural design of buried pipelines under various conditions of loading - Part 2: Summary of nationally established methods of design |
2005-08-31 | |
CEN/TR 1295-3:2007
(WI=00165155) Structural design of buried pipelines under various conditions of loading - Part 3: Common method |
2007-07-25 | |
CEN/TR 1295-4:2015
(WI=00165250) Structural design of buried pipelines under various conditions of loading - Part 4: Parameters for reliability of the design |
2015-09-23 | |
CEN/TR 14920:2005
(WI=00165157) Jetting resistance of drain and sewer pipes - Moving jet test method |
2005-03-09 | |
CEN/TR 15897:2018
(WI=00165286) Submerged Membrane Bioreactor (MBR) technology |
2018-11-28 | |
CEN/TR 16626:2014
(WI=00165253) Vitrified clay pipe systems for drains and sewers - Guidance for voluntary third-party certification procedures |
2014-01-08 | |
CEN/TR 17614:2021
(WI=00165335) Standard method for assessing and improving the energy efficiency of waste water treatment plants |
2021-01-13 | |
EN 1123-1:1999
(WI=00165010) Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control |
1999-01-20 | |
EN 1123-1:1999/A1:2004
(WI=00165161) Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control |
2004-09-02 | |
EN 1123-2:2006+A1:2007
(WI=00165213) Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions |
2007-09-26 | |
EN 1123-3:2004
(WI=00165132) Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building |
2004-11-10 | |
EN 1124-1:1999
(WI=00165071) Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control |
1999-01-20 | |
EN 1124-1:1999/A1:2004
(WI=00165162) Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control |
2004-09-02 | |
EN 1124-2:2014
(WI=00165244) Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S, forms and dimensions |
2014-06-18 | |
EN 1124-3:2008
(WI=00165192) Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X - Dimensions |
2008-10-01 | |
EN 1124-4:2013
(WI=00165237) Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships |
2013-10-16 | |
EN 12050-1:2015
(WI=00165195) Wastewater lifting plants for buildings and sites - Part 1: Lifting plants for wastewater containing faecal matter |
2015-03-18 | |
EN 12050-2:2015
(WI=00165196) Wastewater lifting plants for buildings and sites - Part 2: Lifting plants for faecal-free wastewater |
2015-03-18 | |
EN 12050-3:2015
(WI=00165197) Wastewater lifting plants for buildings and sites - Part 3: Lifting plants for limited applications |
2015-03-18 | |
EN 12050-4:2015
(WI=00165198) Wastewater lifting plants for buildings and sites - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter |
2015-03-18 | |
EN 12056-1:2000
(WI=00165030) Gravity drainage systems inside buildings - Part 1: General and performance requirements |
2000-06-21 | |
EN 12056-2:2000
(WI=00165064) Gravity drainage systems inside buildings - Part 2: Sanitary pipework, layout and calculation |
2000-06-21 | |
EN 12056-3:2000
(WI=00165065) Gravity drainage systems inside buildings - Part 3: Roof drainage, layout and calculation |
2000-06-21 | |
EN 12056-4:2000
(WI=00165066) Gravity drainage systems inside buildings - Part 4: Wastewater lifting plants - Layout and calculation |
2000-06-21 | |
EN 12056-5:2000
(WI=00165067) Gravity drainage systems inside buildings - Part 5: Installation and testing, instructions for operation, maintenance and use |
2000-06-21 | |
EN 12109:1999
(WI=00165069) Vacuum drainage systems inside buildings |
1999-04-21 | |
EN 12255-10:2023
(WI=00165333) Wastewater treatment plants - Part 10: Safety principles |
2023-03-15 | |
EN 12255-11:2023
(WI=00165319) Wastewater treatment plants - Part 11: General data required |
2023-02-08 | |
EN 12255-12:2024
(WI=00165332) Wastewater treatment plants - Part 12: Control and automation |
2024-03-13 | |
EN 12255-13:2023
(WI=00165330) Wastewater treatment plants - Part 13: Chemical treatment - Treatment of wastewater by precipitation/flocculation |
2023-07-19 | |
EN 12255-14:2023
(WI=00165334) Wastewater treatment plants - Part 14: Disinfection |
2023-07-05 | |
EN 12255-15:2003
(WI=00165137) Wastewater treatment plants - Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants |
2003-12-03 | |
EN 12255-16:2021
(WI=00165308) Wastewater treatment plants - Part 16: Physical (mechanical) filtration |
2021-07-28 | |
EN 12255-1:2002
(WI=00165091) Wastewater treatment plants - Part 1: General construction principles |
2002-01-16 | |
EN 12255-3:2024
(WI=00165331) Wastewater treatment plants - Part 3: Preliminary treatment |
2024-01-31 | |
EN 12255-4:2023
(WI=00165323) Wastewater treatment plants - Part 4: Primary treatment |
2023-03-01 | |
EN 12255-5:2024
(WI=00165320) Wastewater treatment plants - Part 5: Lagooning processes |
2024-03-20 | |
EN 12255-6:2023
(WI=00165321) Wastewater treatment plants - Part 6: Activated sludge process |
2023-07-05 | |
EN 12255-7:2002
(WI=00165096) Wastewater treatment plants - Part 7: Biological fixed-film reactors |
2002-01-16 | |
EN 12255-8:2024
(WI=00165317) Wastewater treatment plants - Part 8: Sludge treatment and storage |
2024-05-08 | |
EN 12255-9:2023
(WI=00165318) Wastewater treatment plants - Part 9: Odour control and ventilation |
2023-11-29 | |
EN 12380:2002
(WI=00165131) Air admittance valves for drainage systems - Requirements, tests methods and evaluation of conformity |
2002-12-04 | |
EN 124-1:2015
(WI=00165236) Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods |
2015-06-10 | |
EN 124-2:2015
(WI=00165249) Gully tops and manhole tops for vehicular and pedestrian areas - Part 2: Gully tops and manhole tops made of cast iron |
2015-06-10 | |
EN 124-3:2015
(WI=00165245) Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys |
2015-06-10 | |
EN 124-4:2015
(WI=00165246) Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete |
2015-06-10 | |
EN 124-5:2015
(WI=00165247) Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials |
2015-06-10 | |
EN 124-6:2015
(WI=00165248) Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
2015-06-10 | |
EN 1253-1:2015
(WI=00165217) Gullies for buildings - Part 1: Trapped floor gullies with a depth water seal of at least 50 mm |
2015-01-21 | |
EN 1253-2:2015
(WI=00165218) Gullies for buildings - Part 2: Roof drains and floor gullies without trap |
2015-01-21 | |
EN 1253-3:2016
(WI=00165279) Gullies for buildings - Part 3: Evaluation of conformity |
2016-05-18 | |
EN 1253-4:2016
(WI=00165278) Gullies for buildings - Part 4: Access covers |
2016-04-27 | |
EN 1253-5:2017
(WI=00165280) Gullies for buildings - Part 5: Gullies with light liquids closure |
2017-02-08 | |
EN 1253-6:2022
(WI=00165337) Gullies for buildings - Part 6: Trapped floor gullies with a depth of water seal less than 50 mm |
2022-10-26 | |
EN 1253-7:2022
(WI=00165338) Gullies for buildings - Part 7: Trapped floor gullies with mechanical closure |
2022-10-26 | |
EN 1253-8:2022
(WI=00165339) Gullies for buildings - Part 8: Trapped floor gullies with combined mechanical closure and water seal |
2022-10-26 | |
EN 12566-1:2016
(WI=00165272) Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks |
2016-08-31 | |
EN 12566-3:2016
(WI=00165271) Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants |
2016-08-31 | |
EN 12566-4:2016
(WI=00165274) Small wastewater treatment systems for up to 50 PT - Part 4: Septic tanks assembled in situ from prefabricated kits |
2016-08-31 | |
EN 12566-6:2016
(WI=00165275) Small wastewater treatment systems for up to 50 PT - Part 6: Prefabricated treatment units for septic tank effluent |
2016-08-31 | |
EN 12566-7:2016
(WI=00165273) Small wastewater treatment systems for up to 50 PT - Part 7: Prefabricated tertiary treatment units |
2016-08-31 | |
EN 12763:2000
(WI=00165081) Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery |
2000-07-19 | |
EN 12889:2022
(WI=00165290) Trenchless construction and testing of drains and sewers |
2022-10-12 | |
EN 1295-1:2019
(WI=00165289) Structural design of buried pipelines under various conditions of loading - Part 1: General requirements |
2019-04-03 | |
EN 13101:2002
(WI=00165168) Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity |
2002-10-23 | |
EN 13380:2001
(WI=00165127) General requirements for components used for renovation and repair of drain and sewer systems outside buildings |
2001-05-02 | |
EN 13508-1:2012
(WI=00165216) Investigation and assessment of drain and sewer systems outside buildings - Part 1: General Requirements |
2012-10-17 | |
EN 13508-2:2003+A1:2011
(WI=00165243) Investigation and assessment of drain and sewer systems outside buildings - Part 2: Visual inspection coding system |
2011-05-18 | |
EN 13564-1:2002
(WI=00165125) Anti-flooding devices for buildings - Part 1: Requirements |
2002-07-10 | |
EN 13564-2:2002
(WI=00165126) Anti-flooding devices for buildings - Part 2: Test methods |
2002-11-20 | |
EN 13564-3:2003
(WI=00165163) Anti-flooding devices for buildings - Part 3: Quality assurance |
2003-11-05 | |
EN 1433:2002
(WI=00165004) Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity |
2002-11-13 | |
EN 1433:2002/A1:2005
(WI=00165179) Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity |
2005-06-01 | |
EN 1433:2002/AC:2004
(WI=00165C05) Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity |
2004-09-08 | |
EN 14396:2004
(WI=00165147) Fixed ladders for manholes |
2004-01-14 | |
EN 14457:2004
(WI=00165156) General requirements for components specifically designed for use in trenchless construction of drains and sewers |
2004-07-07 | |
EN 14654-1:2021
(WI=00165327) Drain and sewer systems outside buildings - Management and control of activities - Part 1: General requirements |
2021-01-20 | |
EN 14654-2:2021
(WI=00165325) Drain and sewer systems outside buildings - Management and control of activities - Part 2: Rehabilitation |
2021-01-20 | |
EN 14654-3:2021
(WI=00165326) Drain and sewer systems outside buildings - Management and control of activities - Part 3: Drain and sewer cleaning |
2021-01-20 | |
EN 14654-4:2021
(WI=00165304) Drain and sewer systems outside buildings - Management and control of activities - Part 4: Control of inputs from users |
2021-01-20 | |
EN 14801:2006
(WI=00165148) Conditions for pressure classification of products for water and wastewater pipelines |
2006-07-05 | |
EN 15885:2018
(WI=00165285) Classification and characteristics of techniques for renovation, repair and replacement of drains and sewers |
2018-11-07 | |
EN 1610:2015
(WI=00165231) Construction and testing of drains and sewers |
2015-09-02 | |
EN 16323:2014
(WI=00165233) Glossary of wastewater engineering terms |
2014-04-16 | |
EN 16397-1:2014
(WI=00165208) Flexible couplings - Part 1: Performance requirements |
2014-11-05 | |
EN 16397-2:2014
(WI=00165235) Flexible couplings - Part 2: Characteristics and testing for metal banded flexible couplings, adaptors and bushes |
2014-11-05 | |
EN 16506:2014
(WI=00165189) Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL) |
2014-10-15 | |
EN 16932-1:2018
(WI=00165238) Drain and sewer systems outside buildings - Pumping systems - Part 1: General requirements |
2018-04-11 | |
EN 16932-2:2018
(WI=00165239) Drain and sewer systems outside buildings - Pumping systems - Part 2: Positive pressure systems |
2018-04-11 | |
EN 16932-3:2018
(WI=00165240) Drain and sewer systems outside buildings - Pumping systems - Part 3: Vacuum systems |
2018-04-11 | |
EN 16933-1:2022
(WI=00165312) Drain and sewer systems outside buildings - Design - Part 1: Layout principles |
2022-03-09 | |
EN 16933-2:2017
(WI=00165284) Drain and sewer systems outside buildings - Design - Part 2: Hydraulic design |
2017-09-27 | |
EN 16941-1:2024
(WI=00165350) On-site non-potable water systems - Part 1: Systems for the use of rainwater |
2024-03-20 | |
EN 16941-2:2021
(WI=00165283) On-site non-potable water systems - Part 2: Systems for the use of treated greywater |
2021-01-27 | |
EN 1825-1:2004
(WI=00165052) Grease separators - Part 1: Principles of design, performance and testing, marking and quality control |
2004-09-02 | |
EN 1825-1:2004/AC:2006
(WI=00165C06) Grease separators - Part 1: Principles of design, performance and testing, marking and quality control |
2006-05-17 | |
EN 1825-2:2002
(WI=00165055) Grease separators - Part 2: Selection of nominal size, installation, operation and maintenance |
2002-02-27 | |
EN 1916:2002
(WI=00165047) Concrete pipes and fittings, unreinforced, steel fibre and reinforced |
2002-10-23 | |
EN 1916:2002/AC:2008
(WI=00165C10) Concrete pipes and fittings, unreinforced, steel fibre and reinforced |
2008-04-23 | |
EN 1917:2002
(WI=00165048) Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced |
2002-10-23 | |
EN 1917:2002/AC:2008
(WI=00165C11) Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced |
2008-04-23 | |
EN 274-1:2002
(WI=00165118) Waste fittings for sanitary appliances - Part 1: Requirements |
2002-01-23 | |
EN 274-2:2002
(WI=00165119) Waste fittings for sanitary appliances - Part 2: Test methods |
2002-01-23 | |
EN 274-3:2002
(WI=00165120) Waste fittings for sanitary appliances - Part 3: Quality control |
2002-01-23 | |
EN 295-1:2013
(WI=00165221) Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for pipes, fittings and joints |
2013-02-06 | |
EN 295-2:2013
(WI=00165222) Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling |
2013-02-06 | |
EN 295-3:2012
(WI=00165223) Vitrified clay pipe systems for drains and sewers - Part 3: Test methods |
2012-01-11 | |
EN 295-4:2013
(WI=00165224) Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings |
2013-02-06 | |
EN 295-5:2013
(WI=00165225) Vitrified clay pipe systems for drains and sewers - Part 5: Requirements for perforated pipes and fittings |
2013-02-06 | |
EN 295-6:2013
(WI=00165226) Vitrified clay pipes systems for drain and sewers - Part 6: Requirements for components of manholes and inspection chambers |
2013-02-06 | |
EN 295-7:2013
(WI=00165227) Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking |
2013-02-06 | |
EN 476:2022
(WI=00165336) General requirements for components used in drains and sewers |
2022-04-27 | |
EN 588-1:1996
(WI=00165043) Fibre-cement pipes for sewers and drains - Part 1: Pipes, joints and fittings for gravity systems |
1996-08-21 | |
EN 588-2:2001
(WI=00165044) Fibre cement pipes for drains and sewers - Part 2: Manholes and inspection chambers |
2001-12-12 | |
EN 752:2017
(WI=00165257) Drain and sewer systems outside buildings - Sewer system management |
2017-04-26 | |
EN 858-1:2002
(WI=00165054) Separator systems for light liquids (e.g. oil and petrol) - Part 1: Principles of product design, performance and testing, marking and quality control |
2002-01-23 | |
EN 858-1:2002/A1:2004
(WI=00165171) Separator systems for light liquids (e.g. oil and petrol) - Part 1: Principles of product design, performance and testing, marking and quality control |
2004-11-24 | |
EN 858-2:2003
(WI=00165053) Separator systems for light liquids (e.g. oil and petrol) - Part 2: Selection of nominal size, installation, operation and maintenance |
2003-01-22 | |
EN ISO 11296-9:2022
(WI=00165340) Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022) |
2022-10-12 |