About CEN
The European Committee for Standardization is one of three European Standardization Organizations (together with CENELEC and ETSI) that have been officially recognized by the European Union and by the European Free Trade Association (EFTA) as being responsible for developing and defining voluntary standards at European level.
CEN/TC 218 |
- |
Rubber and plastics hoses and hose assemblies |
CEN/TC 218 Published Standards
|
Project reference, Title
|
Publication date
|
Sales Points
|
|---|---|---|
|
CEN/TS 14421:2006
(WI=00218068) Hose tail and ferrule for crimping and swaging |
2006-12-06 |
|
|
CEN/TS 16650:2014
(WI=00218171) Specification for hose couplings for petrol, oil and lubricants - High pressure couplings |
2014-06-04 |
|
|
EN 12115:2021
(WI=00218224) Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
2021-01-20 |
|
|
EN 13482:2013
(WI=00218144) Rubber hoses and hose assemblies for asphalt and bitumen - Specification |
2013-10-16 |
|
|
EN 13483:2022
(WI=00218243) Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
2022-10-12 |
|
|
EN 1360:2013
(WI=00218152) Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
2013-06-19 |
|
|
EN 13765:2018
(WI=00218212) Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification |
2018-06-27 |
|
|
EN 13766:2018+A1:2020
(WI=00218242) Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification |
2020-05-06 |
|
|
EN 14420-1:2013
(WI=00218160) Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing |
2013-07-10 |
|
|
EN 14420-2:2022
(WI=00218236) Hose fittings with clamp units - Part 2: Hose side parts of hose tail |
2022-08-31 |
|
|
EN 14420-3:2013
(WI=00218155) Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
2013-07-10 |
|
|
EN 14420-4:2022
(WI=00218238) Hose fittings with clamp units - Part 4: Flange connections |
2022-08-31 |
|
|
EN 14420-5:2013
(WI=00218159) Hose fittings with clamp units - Part 5: Threaded connections |
2013-07-10 |
|
|
EN 14420-6:2013
(WI=00218161) Hose fittings with clamp units - Part 6: TW tank truck couplings |
2013-07-10 |
|
|
EN 14420-7:2022
(WI=00218237) Hose fittings with clamp units - Part 7: Cam locking couplings |
2022-08-31 |
|
|
EN 14420-7:2022/AC:2023
(WI=00218C16) Hose fittings with clamp units - Part 7: Cam locking couplings |
2023-10-25 |
|
|
EN 14420-8:2013+A1:2016
(WI=00218214) Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) |
2016-02-10 |
|
|
EN 14422:2013
(WI=00218151) Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
2013-06-26 |
|
|
EN 14423:2013+A2:2019
(WI=00218229) Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
2019-05-08 |
|
|
EN 14424:2013
(WI=00218150) Hose fittings with screwed ferrules |
2013-06-19 |
|
|
EN 16643:2016
(WI=00218169) Rubber and plastics hoses and hose assemblies - Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - Specification |
2016-08-17 |
|
|
EN 16820:2017
(WI=00218182) Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining |
2017-06-14 |
|
|
EN 16821:2017
(WI=00218183) Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Silicone rubber hoses |
2017-06-14 |
|
|
EN 1761:1999
(WI=00218031) Rubber hoses and hose assemblies for fuel truck delivery - Specification |
1999-02-17 |
|
|
EN 1762:2018
(WI=00218223) Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification |
2018-12-19 |
|
|
EN 1765:2016
(WI=00218193) Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
2016-08-17 |
|
|
EN 853:2015
(WI=00218164) Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
2015-04-01 |
|
|
EN 854:2015
(WI=00218165) Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
2015-04-01 |
|
|
EN 856:2015+AC:2019
(WI=00218230) Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
2019-03-06 |
|
|
EN 857:2015
(WI=00218168) Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification |
2015-04-01 |
|
|
EN ISO 10619-1:2018
(WI=00218220) Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017) |
2018-03-01 |
|
|
EN ISO 10619-2:2021
(WI=00218228) Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021) |
2021-07-14 |
|
|
EN ISO 10619-3:2011
(WI=00218140) Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011) |
2011-12-01 |
|
|
EN ISO 10960:2018
(WI=00218222) Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:2017) |
2018-02-07 |
|
|
EN ISO 1307:2008
(WI=00218123) Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses (ISO 1307:2006) |
2008-01-23 |
|
|
EN ISO 1401:2016
(WI=00218196) Rubber hoses for agricultural spraying (ISO 1401:2016) |
2016-11-30 |
|
|
EN ISO 1402:2021
(WI=00218240) Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2021) |
2021-05-19 |
|
|
EN ISO 1403:2019
(WI=00218232) Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:2019) |
2019-09-04 |
|
|
EN ISO 1825:2017
(WI=00218215) Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (ISO 1825:2017) |
2017-12-20 |
|
|
EN ISO 18752:2022
(WI=00218244) Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2022) |
2022-04-06 |
|
|
EN ISO 2398:2024
(WI=00218249) Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2024) |
2024-05-08 |
|
|
EN ISO 28017:2018
(WI=00218218) Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2018) |
2018-02-28 |
|
|
EN ISO 30013:2011
(WI=00218129) Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
2011-10-15 |
|
|
EN ISO 3861:2021
(WI=00218233) Rubber hoses and hose assemblies for sand and grit blasting - Specification (ISO 3861:2021) |
2021-02-03 |
|
|
EN ISO 3949:2020
(WI=00218231) Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2020, Corrected version 2020-12) |
2020-08-12 |
|
|
EN ISO 3994:2014
(WI=00218179) Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014) |
2014-08-20 |
|
|
EN ISO 4023:2009
(WI=00218141) Rubber hoses and hose assemblies for steam - Test methods (ISO 4023:2009) |
2009-11-01 |
|
|
EN ISO 4080:2024
(WI=00218246) Rubber and plastics hoses and tubing, and their assemblies - Determination of permeability to gas (ISO 4080:2024) |
2024-06-26 |
|
|
EN ISO 4641:2024
(WI=00218250) Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2024) |
2024-05-01 |
|
|
EN ISO 4671:2022
(WI=00218245) Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2022) |
2022-03-30 |
|
|
EN ISO 5771:2024
(WI=00218251) Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification (ISO 5771:2024) |
2024-04-24 |
|
|
EN ISO 5774:2023
(WI=00218252) Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2023) |
2023-05-03 |
|
|
EN ISO 6134:2024
(WI=00218260) Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2024) |
2024-06-12 |
|
|
EN ISO 6224:2024
(WI=00218253) Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2024) |
2024-05-01 |
|
|
EN ISO 6801:2021
(WI=00218247) Rubber and plastics hoses - Determination of volumetric expansion (ISO 6801:2021) |
2021-12-08 |
|
|
EN ISO 6802:2018
(WI=00218189) Rubber or plastics hoses and hose assemblies - Hydraulic impulse test with flexing (ISO 6802:2018) |
2018-10-24 |
|
|
EN ISO 6803:2017
(WI=00218203) Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017) |
2017-03-15 |
|
|
EN ISO 6806:2024
(WI=00218261) Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2024) |
2024-05-22 |
|
|
EN ISO 6808:2014
(WI=00218146) Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:2014) |
2014-07-02 |
|
|
EN ISO 7233:2021
(WI=00218227) Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2021) |
2021-05-19 |
|
|
EN ISO 7326:2016
(WI=00218205) Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326:2016) |
2016-10-26 |
|
|
EN ISO 7662:1996
(WI=00218009) Rubber and plastics hoses - Determination of abrasion of lining (ISO 7662:1988) |
1996-07-24 |
|
|
EN ISO 7751:2016
(WI=00218206) Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure (ISO 7751:2016) |
2016-11-30 |
|
|
EN ISO 8028:2024
(WI=00218262) Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2024) |
2024-08-14 |
|
|
EN ISO 8029:2014
(WI=00218180) Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014) |
2014-08-20 |
|
|
EN ISO 8030:2014
(WI=00218185) Rubber and plastics hoses - Method of test for flammability (ISO 8030:2014) |
2014-07-16 |
|
|
EN ISO 8031:2020
(WI=00218241) Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2020) |
2020-07-15 |
|
|
EN ISO 8033:2017
(WI=00218207) Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016) |
2017-01-18 |
|
|
EN ISO 8308:2015
(WI=00218208) Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls (ISO 8308:2015) |
2015-10-14 |
|
|
EN ISO 8330:2022
(WI=00218239) Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2022) |
2022-04-13 |
|
|
EN ISO 8331:2016
(WI=00218200) Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance (ISO 8331:2016) |
2016-11-30 |
|