The European Committee for Standardization is one of three European Standardization Organizations (together with CENELEC and ETSI) that have been officially recognized by the European Union and by the European Free Trade Association (EFTA) as being responsible for developing and defining voluntary standards at European level.
CEN/TC 261 |
- |
Packaging |
Project reference, Title
|
Publication date
|
Sales Points
|
---|---|---|
CEN/TR 13688:2008
(WI=00261356) Packaging - Material recycling - Report on requirements for substances and materials to prevent a sustained impediment to recycling |
2008-07-16 | |
CEN/TR 13695-2:2019
(WI=00261446) Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment - Part 2: Requirements for measuring and verifying dangerous substances present in packaging, and their release into the environment |
2019-02-13 | |
CEN/TR 13910:2010
(WI=00261370) Packaging - Report on criteria and methodologies for life cycle analysis of packaging |
2010-08-11 | |
CEN/TR 14520:2007
(WI=00261329) Packaging - Reuse - Methods for assessing the performance of a reuse system |
2007-07-25 | |
CEN/TR 15753:2008
(WI=00261359) Packaging - Package leaflets for medicinal products - Braille and other formats for visually impaired people |
2008-06-18 | |
CEN/TR 16353:2012
(WI=00261394) Packaging - Safety guidelines for flexible plastic packaging to minimize the risk of suffocation to children |
2012-07-18 | |
CR 12340:1996
(WI=00261072) Packaging - Recommendations for conducting life-cycle inventory analysis of packaging systems |
1996-07-24 | |
CR 13504:2000
(WI=00261197) Packaging - Material recovery - Criteria for a minimum content of recycled material |
2000-04-19 | |
CR 13686:2001
(WI=00261260) Packaging - Optimization of energy recovery from packaging waste |
2001-04-18 | |
CR 13695-1:2000
(WI=00261266) Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment - Part 1: Requirements for measuring and verifying the four heavy metals present in packaging |
2000-03-22 | |
CR 14311:2002
(WI=00261070) Packaging - Marking and material identification system |
2002-04-17 | |
CR 1460:1994
(WI=00261079) Packaging - Energy recovery from used packaging |
1994-04-29 | |
EN 1086:1995
(WI=00261496) Sacks for the transport of food aid - Recommendations on the selection of type of sack and the liner in relation to the product to be packed |
1995-04-19 | |
EN 12374:2022
(WI=00261481) Packaging - Flexible tubes - Terminology |
2022-10-26 | |
EN 12375:2009
(WI=00261352) Packaging - Flexible aluminium tubes - Wall thickness determination method |
2009-04-22 | |
EN 12377:2022
(WI=00261478) Packaging - Flexible tubes - Test method for the air tightness of closures |
2022-10-26 | |
EN 12674-1:1999
(WI=00261192) Roll containers - Part 1: Terminology |
1999-07-14 | |
EN 12674-2:2001
(WI=00261143) Roll containers - Part 2: General design and safety principles |
2001-12-05 | |
EN 12674-3:2004
(WI=00261144) Roll containers - Part 3: Test methods |
2004-10-27 | |
EN 12674-3:2004/AC:2006
(WI=00261C10) Roll containers - Part 3: Test methods |
2006-05-17 | |
EN 12674-4:2015
(WI=00261427) Roll containers - Part 4: Performance requirements |
2015-04-15 | |
EN 12707:2009
(WI=00261367) Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l and 225 l |
2009-07-29 | |
EN 12709:2000
(WI=00261110) Plastics drums - Non-removable head (tight head) circular cross-section drums with a nominal capacity of 20 l to 120 l |
2000-01-19 | |
EN 12710:2006
(WI=00261332) Fibreboard drums - Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l |
2006-05-31 | |
EN 12712:2000
(WI=00261181) Plastics jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm, 1000 mm x 1200 mm and 1140 mm x 1140 mm |
2000-01-19 | |
EN 12713:2000
(WI=00261210) Screw cap closure systems for plastics containers with a nominal capacity of 20 l to 60 l |
2000-01-19 | |
EN 12714:2009
(WI=00261366) Plastics drums - Removable head (open head) drums with a nominal capacity of 25 L to 60 L |
2009-07-29 | |
EN 12726:2018
(WI=00261448) Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules |
2018-10-03 | |
EN 13007:1999
(WI=00261107) Steel drums - Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l |
1999-12-08 | |
EN 13008:1999
(WI=00261183) Steel drums - Removable head (open head) drums with a nominal capacity of 15 l to 62 l |
1999-12-08 | |
EN 13010:2003
(WI=00261157) Packaging - Unit packaging - Dimensions and requirements for pegboard display |
2003-01-22 | |
EN 13025-1:2005
(WI=00261322) Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml |
2005-11-02 | |
EN 13025-2:2005
(WI=00261323) Packaging - Light gauge metal containers - Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and 30 000 ml |
2005-11-02 | |
EN 13025-3:2005
(WI=00261324) Packaging - Light gauge metal containers - Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and 30 000 ml |
2005-11-02 | |
EN 13026:2001
(WI=00261089) Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml |
2001-01-24 | |
EN 13027:2001
(WI=00261090) Packaging - Light-gauge metal packaging - Open-top round cans defined by their nominal gross-lidded capacity |
2001-01-24 | |
EN 13028:2001
(WI=00261091) Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with added gas, defined by their nominal filling volumes |
2001-01-24 | |
EN 13028:2001/AC:2002
(WI=00261C04) Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with added gas, defined by their nominal filling volumes |
2002-07-24 | |
EN 13029:2009
(WI=00261369) Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures |
2009-11-11 | |
EN 13045:2022
(WI=00261477) Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances |
2022-08-24 | |
EN 13046:2000
(WI=00261114) Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances |
2000-07-19 | |
EN 13047:2000
(WI=00261116) Packaging - Flexible conical metallic tubes - Dimensions and tolerances |
2000-07-19 | |
EN 13048:2022
(WI=00261480) Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method |
2022-10-26 | |
EN 13054:2001
(WI=00261161) Packaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a package |
2001-02-21 | |
EN 13117-1:2000
(WI=00261147) Transport packaging - Reusable, rigid plastics distribution boxes - Part 1: General purpose application |
2000-05-24 | |
EN 13117-2:2000
(WI=00261195) Transport packaging - Reusable, rigid plastics distribution boxes - Part 2: General specifications for testing |
2000-05-24 | |
EN 13193:2000
(WI=00261069) Packaging - Packaging and the environment - Terminology |
2000-05-24 | |
EN 13199-1:2000
(WI=00261124) Packaging - Small Load Carrier Systems - Part 1: Common requirements and test methods |
2000-07-19 | |
EN 13199-2:2000
(WI=00261125) Packaging - Small Load Carrier Systems - Part 2: Column Stackable System (CSS) |
2000-07-19 | |
EN 13199-3:2000
(WI=00261126) Packaging - Small Load Carrier Systems - Part 3: Bond Stackable System (BSS) |
2000-07-19 | |
EN 13246:2001
(WI=00261064) Packaging - Specification for tensional steel strapping |
2001-04-11 | |
EN 13247:2001
(WI=00261065) Packaging - Specification for tensional strapping for lifting, lashing and securing of loads |
2001-03-21 | |
EN 13382:2002
(WI=00261129) Flat pallets for materials handling - Principal dimensions |
2002-04-03 | |
EN 13393:2001
(WI=00261066) Packaging - Specification for Edge protectors |
2001-04-11 | |
EN 13394:2001
(WI=00261067) Packaging - Specification for non-metallic tensional strapping |
2001-04-11 | |
EN 13427:2004
(WI=00261312) Packaging - Requirements for the use of European Standards in the field of packaging and packaging waste |
2004-07-14 | |
EN 13428:2004
(WI=00261313) Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction |
2004-07-21 | |
EN 13429:2004
(WI=00261314) Packaging - Reuse |
2004-07-21 | |
EN 13430:2004
(WI=00261315) Packaging - Requirements for packaging recoverable by material recycling |
2004-07-21 | |
EN 13431:2004
(WI=00261316) Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value |
2004-07-21 | |
EN 13432:2000
(WI=00261236) Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging |
2000-09-20 | |
EN 13432:2000/AC:2005
(WI=00261C06) Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging |
2005-06-22 | |
EN 13437:2003
(WI=00261076) Packaging and material recycling - Criteria for recycling methods - Description of recycling processes and flow chart |
2003-05-21 | |
EN 13439:2003
(WI=00261215) Packaging - Rate of energy recovery - Definition and method of calculation |
2003-05-21 | |
EN 13440:2003
(WI=00261216) Packaging - Rate of recycling - Definition and method of calculation |
2003-05-21 | |
EN 13461:2009
(WI=00261355) Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances |
2009-04-01 | |
EN 13545:2002
(WI=00261136) Pallet superstructures - Pallet collars - Test methods and performance requirements |
2002-04-17 | |
EN 13590:2003
(WI=00261213) Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity |
2003-03-12 | |
EN 13592:2017
(WI=00261431) Plastics sacks for household waste collection - Types, requirements and test methods |
2017-02-22 | |
EN 13593:2003
(WI=00261254) Packaging - Paper sacks for household waste collection - Types, requirements and test methods |
2003-01-29 | |
EN 13626:2003
(WI=00261140) Packaging - Box pallets - General requirements and test methods |
2003-04-02 | |
EN 13628-1:2002
(WI=00261190) Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 1: Absolute methods |
2002-10-16 | |
EN 13628-2:2002
(WI=00261261) Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 2: Industrial methods |
2002-10-16 | |
EN 13698-1:2003
(WI=00261133) Pallet production specification - Part 1: Construction specification for 800 mm x 1200 mm flat wooden pallets |
2003-07-02 | |
EN 13698-2:2009
(WI=00261350) Pallet production specification - Part 2: Construction specification for 1000 mm x 1200 mm flat wooden pallets |
2009-06-24 | |
EN 13891:2003
(WI=00261068) Tensional strapping - Guide to selection and use of tensional strapping |
2003-06-04 | |
EN 13972:2002
(WI=00261184) Rigid plastics containers - Definition of nominal, brimful and total capacity and measurement of brimful and total capacity |
2002-10-16 | |
EN 13973:2002
(WI=00261187) Rigid plastics containers - Method for determination of drainability |
2002-10-16 | |
EN 13974:2002
(WI=00261188) Rigid plastics containers - Specification of tolerance for dimensions, weight and volume |
2002-10-16 | |
EN 14045:2003
(WI=00261074) Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions |
2003-03-19 | |
EN 14046:2003
(WI=00261085) Packaging - Evaluation of the ultimate aerobic biodegradability of packaging materials under controlled composting conditions - Method by analysis of released carbon dioxide |
2003-03-19 | |
EN 14047:2002
(WI=00261219) Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide |
2002-12-04 | |
EN 14048:2002
(WI=00261218) Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer |
2002-12-04 | |
EN 14053:2003
(WI=00261102) Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction |
2003-06-04 | |
EN 14054:2003
(WI=00261103) Packaging - Paper and paperboard packaging - Design of cartons |
2003-06-04 | |
EN 14149:2003
(WI=00261242) Packaging - Complete, filled transport packages and unit loads - Impact test by rotational drop |
2003-08-27 | |
EN 14182:2002
(WI=00261042) Packaging - Terminology - Basic terms and definitions |
2002-12-04 | |
EN 14391:2004
(WI=00261302) Packaging - Collapsible aluminium tubes - Tactile warnings of danger |
2004-09-29 | |
EN 14401:2004
(WI=00261301) Rigid plastics containers - Methods to test the effectiveness of closures |
2004-06-23 | |
EN 14477:2004
(WI=00261283) Packaging - Flexible packaging material - Determination of puncture resistance - Test methods |
2004-04-07 | |
EN 14479:2004
(WI=00261191) Packaging - Flexible packaging material - Determination of residual solvents by dynamic headspace gas chromatography-Absolute method |
2004-04-07 | |
EN 14768:2005
(WI=00261309) Fibreboard drums - Removable head (open head) drums with slip on lids with a nominal capacity of 5 l to 600 l |
2005-03-16 | |
EN 14798:2005
(WI=00261290) Glass packaging - Hand-held crown bottle openers - Dimensions |
2005-10-12 | |
EN 14847:2005
(WI=00261092) Aerosol containers - Tinplate containers - Dimensions of the 25,4 mm aperture |
2005-11-23 | |
EN 14848:2020
(WI=00261447) Aerosol containers - Metal containers with 25,4 mm aperture - Dimensions of valve cups |
2020-01-15 | |
EN 14849:2005
(WI=00261095) Aerosol containers - Glass containers - Dimensions of aerosol valve ferrules |
2005-11-23 | |
EN 14850:2005
(WI=00261098) Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height |
2005-11-23 | |
EN 14854:2021
(WI=00261457) Glass packaging - Dimensions of neck finishes for aerosol and spray glass containers |
2021-11-03 | |
EN 14867:2005
(WI=00261310) Packaging - Plastic freezer bags - Specifications and test methods |
2005-06-29 | |
EN 14887:2005
(WI=00261321) Glass packaging - Cork removal devices - General requirements |
2005-11-02 | |
EN 14979:2006
(WI=00261326) Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13 |
2006-02-15 | |
EN 15006:2006
(WI=00261094) Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture |
2006-10-11 | |
EN 15007:2017
(WI=00261437) Aerosol containers - Tinplate containers - Dimensions of two and three-piece cans |
2017-03-22 | |
EN 15008:2017
(WI=00261436) Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture |
2017-03-22 | |
EN 15009:2020
(WI=00261454) Aerosol containers - Compartmented aerosol dispensers |
2020-10-07 | |
EN 15010:2006
(WI=00261325) Aerosol containers - Aluminium containers - Tolerances of the fundamental dimensions in connection with the clinch |
2006-10-11 | |
EN 15384-1:2017
(WI=00261438) Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 1: Sodium chloride test |
2017-01-25 | |
EN 15384-2:2017
(WI=00261439) Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 2: Copper sulphate test |
2017-01-25 | |
EN 15385:2007
(WI=00261340) Packaging - Flexible laminate tubes - Test methods to determine the strength of the head welding |
2007-08-22 | |
EN 15386:2007
(WI=00261341) Packaging - Flexible laminate and plastic tubes - Test method to determine the print adhesion |
2007-11-07 | |
EN 15387:2011
(WI=00261342) Packaging - Flexible laminate tubes - Test methods to assess the strength of the side seam |
2011-08-03 | |
EN 15421:2021
(WI=00261459) Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering |
2021-10-27 | |
EN 15433-1:2007
(WI=00261333) Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 1: General requirements |
2007-12-05 | |
EN 15433-2:2007
(WI=00261334) Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 2: Data acquisition and general requirements for measuring equipment |
2007-12-05 | |
EN 15433-3:2007
(WI=00261335) Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 3: Data validity check and data editing for evaluation |
2007-12-05 | |
EN 15433-4:2007
(WI=00261336) Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 4: Data evaluation |
2007-12-05 | |
EN 15433-5:2007
(WI=00261337) Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 5: Derivation of Test Specifications |
2007-12-05 | |
EN 15433-6:2016
(WI=00261433) Transportation loads - Measurement and evaluation of dynamic-mechanical loads - Part 6: Automatic recording systems for measuring randomly occurring shock during monitoring of transports |
2016-07-27 | |
EN 15507:2017
(WI=00261430) Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades |
2017-11-01 | |
EN 15543:2008
(WI=00261327) Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids |
2008-03-19 | |
EN 15543:2008/AC:2008
(WI=00261C14) Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids |
2008-12-17 | |
EN 15552:2008
(WI=00261345) Packaging - Complete, filled transport packages and unit loads - Performance testing schedules for common distribution chains |
2008-08-06 | |
EN 15593:2008
(WI=00261344) Packaging - Management of hygiene in the production of packaging for foodstuffs - Requirements |
2008-03-12 | |
EN 15653:2009
(WI=00261349) Packaging - Flexible aluminium tubes - Test method to check the resistance of the internal protective coating against ammonia |
2009-03-25 | |
EN 15766:2009
(WI=00261358) Packaging - Flexible aluminium tubes - Test methods to determine the polymerization of the internal coating with acetone |
2009-05-13 | |
EN 16063:2011
(WI=00261378) Packaging - Rigid plastic containers - Nomenclature of plastic finishes |
2011-11-30 | |
EN 16064:2011
(WI=00261379) Packaging - Rigid plastic containers - PET finish 30/25 High (18,5) |
2011-11-30 | |
EN 16065:2011
(WI=00261380) Packaging - Rigid plastic containers - PET finish 30/25 Low (16,8) |
2011-11-30 | |
EN 16066:2011
(WI=00261381) Packaging - Rigid plastic containers - PET finish 26,7 (lead 6,35) |
2011-11-30 | |
EN 16067:2011
(WI=00261382) Packaging - Rigid plastic containers - PET finish 26,7 (lead 9,00) |
2011-11-30 | |
EN 16068:2011
(WI=00261383) Packaging - Rigid plastic containers - PET finish 38 |
2011-11-30 | |
EN 16210:2013
(WI=00261384) Transportation loads - Measurement and evaluation of climatic and other loads - Data acquisition and general requirements for measuring equipment |
2013-03-06 | |
EN 16283:2013
(WI=00261395) Packaging - Flexible aluminium tubes - Test method to measure the force to pierce the membrane |
2013-02-13 | |
EN 16284:2013
(WI=00261396) Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane |
2013-02-13 | |
EN 16285:2021
(WI=00261458) Packaging - Flexible aluminium tubes - Test method to measure the deformation of the aluminium tube body (Guillotine test) |
2021-11-03 | |
EN 16292:2013
(WI=00261400) Glass packaging - Screw finishes - Depressed threads |
2013-03-06 | |
EN 16293:2020
(WI=00261449) Packaging - Glass Packaging - Deep BVS finishes for still wines |
2020-06-24 | |
EN 16565:2022
(WI=00261471) Packaging - Flexible tubes - Test method to determine the orientation of the flip-top cap |
2022-10-26 | |
EN 16592:2022
(WI=00261476) Packaging - Rigid plastic containers - PET finish 29/25 (12,6) |
2022-10-26 | |
EN 16593:2014
(WI=00261408) Packaging - Rigid plastic containers - PET finish BVS 30H60 |
2014-10-29 | |
EN 16594:2014
(WI=00261409) Packaging - Rigid plastic containers - PET finish 26/22 (12,0) |
2014-10-29 | |
EN 17177:2019
(WI=00261429) Glass packaging - Crown cap - 26 mm diameter, 6 mm height crown cap |
2019-01-30 | |
EN 17220:2019
(WI=00261443) Packaging - Flexible aluminium tubes - Tube nozzles |
2019-08-21 | |
EN 17427:2022
(WI=00261453) Packaging - Requirements and test scheme for carrier bags suitable for treatment in well-managed home composting installations |
2022-06-15 | |
EN 17428:2023
(WI=00261456) Packaging - Determination of the degree of disintegration under simulated home composting conditions |
2023-12-20 | |
EN 17665:2022+A1:2023
(WI=00261492) Packaging - Test methods and requirements to demonstrate that plastic caps and lids remain attached to beverage containers |
2023-03-22 | |
EN 17827:2023
(WI=00261483) Glass packaging - Finishes for sparkling wines produced by the traditional method (26 mm, 29 mm, 36 mm) |
2023-07-26 | |
EN 17829:2023
(WI=00261485) Glass packaging - 28 millimetre-screw finishes (MCA range) - Dimensions |
2023-07-26 | |
EN 22206:1992
(WI=00261012) Packaging - Complete, filled transport packages - Identification of parts when testing (ISO 2206:1987) |
1992-11-20 | |
EN 22248:1992
(WI=00261014) Packaging - Complete, filled transport packages - Vertical impact test by dropping (ISO 2248:1985) |
1992-11-20 | |
EN 22876:1992
(WI=00261015) Packaging - Complete, filled transport packages - Rolling test (ISO 2876:1985) |
1992-11-20 | |
EN 23-1:1978
(WI=00261952) Packages for washing and cleaning powders - Dimensions and volumes of cartons and drums from fibre board |
1978-05-23 | |
EN 24178:1992
(WI=00261040) Complete, filled transport packages - Distribution trials - Information to be recorded (ISO 4178:1980) |
1992-11-20 | |
EN 26590-1:1992
(WI=00261026) Packaging - Sacks - Vocabulary and types - Part 1: Paper sacks (ISO 6590-1:1983) |
1992-11-20 | |
EN 26590-2:1992
(WI=00261027) Packaging - Sacks - Vocabulary and types - Part 2: Sacks made from thermoplastic flexible film (ISO 6590-2:1986) |
1992-11-20 | |
EN 26591-1:1992
(WI=00261022) Packaging - Sacks - Description and method of measurement - Part 1: Empty paper sacks (ISO 6591-1:1984) |
1992-11-20 | |
EN 26591-2:1992
(WI=00261023) Packaging - Sacks - Description and method of measurement - Part 2: Empty sacks made from thermoplastic flexible film (ISO 6591-2:1985) |
1992-11-20 | |
EN 26599-1:1992
(WI=00261041) Packaging - Sacks - Conditioning for testing - Part 1: Paper sacks (ISO 6599-1:1983) |
1992-11-20 | |
EN 27023:1992
(WI=00261021) Packaging - Sacks - Method of sampling empty sacks for testing (ISO 7023:1983) |
1992-11-20 | |
EN 277:1995
(WI=00261495) Sacks for the transport of food aid - Sacks made of woven polypropylene fabric |
1995-04-19 | |
EN 28474:1992
(WI=00261018) Packaging - Complete, filled transport packages - Water immersion test (ISO 8474:1986) |
1992-11-20 | |
EN 28768:1992
(WI=00261035) Packaging - Complete, filled transport packages - Toppling test (ISO 8768:1986) |
1992-11-20 | |
EN 29008:1994
(WI=00261059) Glass bottles - Verticality - Test method (ISO 9008:1991) |
1994-04-15 | |
EN 29009:1994
(WI=00261060) Glass containers - Height and non-parallelism of finish with reference to container base - Test methods (ISO 9009:1991) |
1994-04-14 | |
EN 29885:1994
(WI=00261061) Wide-mouth glass containers - Deviation from flatness of top sealing surface - Test methods (ISO 9885:1991) |
1994-04-15 | |
EN 765:1994
(WI=00261500) Sacks for the transport of food aid - Sacks made of woven polyolefin fabric other than polypropylene only |
1994-05-31 | |
EN 766:1994
(WI=00261501) Sacks for the transport of food aid - Sacks made of jute fabric |
1994-05-31 | |
EN 767:1994
(WI=00261502) Sacks for the transport of food aid - Sacks made of woven jute/polyolefin fabric |
1994-05-31 | |
EN 768:1994
(WI=00261503) Sacks for the transport of food aid - Sacks made of lined cotton fabric |
1994-05-31 | |
EN 769:1994
(WI=00261504) Sacks for the transport of food aid - Sacks made of woven cotton/polyolefin fabric |
1994-05-31 | |
EN 76:1978
(WI=00261950) Packages for certain prepacked foodstuffs - Capacities of glass and metal containers |
1978-12-05 | |
EN 770:1994
(WI=00261499) Sacks for the transport of food aid - Paper sacks |
1994-05-31 | |
EN 787:1994
(WI=00261498) Sacks for the transport of food aid - Sacks made of polyethylene film |
1994-05-31 | |
EN 788:1994
(WI=00261497) Sacks for the transport of food aid - Tubular sacks made of composite film |
1994-05-31 | |
EN ISO 11683:1997
(WI=00261159) Packaging - Tactile warnings of danger - Requirements (ISO 11683:1997) |
1997-10-01 | |
EN ISO 11897:2001
(WI=00261179) Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds (ISO 11897:1999) |
2001-06-20 | |
EN ISO 12048:2000
(WI=00261284) Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester (ISO 12048:1994) |
2000-12-13 | |
EN ISO 12777-1:1996
(WI=00261134) Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples (ISO 12777-1:1994) |
1996-08-21 | |
EN ISO 12777-1:1996/A1:2008
(WI=00261371) Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples - Amendment 1 (ISO 12777-1:1994/Amd 1:2008) |
2008-11-01 | |
EN ISO 12777-2:2000
(WI=00261234) Methods of test for pallet joints - Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples (ISO 12777-2:2000) |
2000-04-15 | |
EN ISO 12777-3:2002
(WI=00261235) Methods of test for pallet joints - Part 3: Determination of strength of pallet joints (ISO 12777-3:2002) |
2002-12-01 | |
EN ISO 12818:2015
(WI=00261432) Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013) |
2015-05-06 | |
EN ISO 12821:2019
(WI=00261450) Glass packaging - 26 H 180 crown finish - Dimensions (ISO 12821:2019) |
2019-10-30 | |
EN ISO 12822:2020
(WI=00261452) Glass packaging - 26 H 126 crown finish - Dimensions (ISO 12822:2020) |
2020-04-01 | |
EN ISO 13127:2012
(WI=00261376) Packaging - Child resistant packaging - Mechanical test methods for reclosable child resistant packaging systems (ISO 13127:2012) |
2012-10-01 | |
EN ISO 13127:2012/AC:2012
(WI=00261C18) Packaging - Child resistant packaging - Mechanical test methods for reclosable child resistant packaging systems - Technical Corrigendum 1 (ISO 13127:2012/Cor 1:2012) |
2012-12-01 | |
EN ISO 13274:2013
(WI=00261393) Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs (ISO 13274:2013) |
2013-08-21 | |
EN ISO 13274:2013/AC:2014
(WI=00261C19) Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs - Technical Corrigendum 1 (ISO 13274:2013/Cor 1:2014) |
2014-04-02 | |
EN ISO 13355:2016
(WI=00261419) Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test (ISO 13355:2016) |
2016-08-24 | |
EN ISO 14375:2023
(WI=00261487) Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing (ISO 14375:2018) |
2023-03-29 | |
EN ISO 15119:2004
(WI=00261212) Packaging - Sacks - Determination of the friction of filled sacks (ISO 15119:2000) |
2004-09-01 | |
EN ISO 15750-1:2008
(WI=00261363) Packaging - Steel drums - Part 1: Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l (ISO 15750-1:2002) |
2008-06-18 | |
EN ISO 15750-2:2008
(WI=00261364) Packaging - Steel drums - Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l (ISO 15750-2:2002) |
2008-06-18 | |
EN ISO 15750-3:2022
(WI=00261473) Packaging - Steel drums - Part 3: Inserted flange-type closure systems (ISO 15750-3:2022) |
2022-08-31 | |
EN ISO 15867:2003
(WI=00261155) Intermediate bulk containers (IBCs) for non-dangerous goods - Terminology (ISO 15867:2003) |
2003-07-01 | |
EN ISO 16103:2005
(WI=00261289) Packaging - Transport packages for dangerous goods - Recycled plastics material (ISO 16103:2005) |
2005-07-01 | |
EN ISO 16106:2020
(WI=00261451) Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 (ISO 16106:2020) |
2020-02-19 | |
EN ISO 16495:2022
(WI=00261472) Packaging - Transport packaging for dangerous goods - Test methods (ISO 16495:2022, Corrected version 2023-04) |
2022-06-08 | |
EN ISO 17351:2014
(WI=00261424) Packaging - Braille on packaging for medicinal products (ISO 17351:2013) |
2014-07-16 | |
EN ISO 17480:2018
(WI=00261444) Packaging - Accessible design - Ease of opening (ISO 17480:2015) |
2018-09-19 | |
EN ISO 18613:2014
(WI=00261417) Pallets for materials handling - Repair of flat wooden pallets (ISO 18613:2014) |
2014-11-05 | |
EN ISO 20848-1:2008
(WI=00261360) Packaging - Plastics drums - Part 1: Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l (ISO 20848-1:2006) |
2008-06-18 | |
EN ISO 20848-2:2008
(WI=00261361) Packaging - Plastics drums - Part 2: Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l (ISO 20848-2:2006) |
2008-06-18 | |
EN ISO 20848-3:2018
(WI=00261440) Packaging - Plastics drums - Part 3: Plug bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l (ISO 20848-3:2018) |
2018-12-19 | |
EN ISO 21898:2024
(WI=00261484) Packaging - Flexible intermediate bulk containers (FIBCs) for non-dangerous goods (ISO 21898:2024) |
2024-09-04 | |
EN ISO 21976:2020
(WI=00261460) Packaging - Tamper verification features for medicinal product packaging (ISO 21976:2018) |
2020-10-14 | |
EN ISO 2233:2001
(WI=00261287) Packaging - Complete, filled transport packages and unit loads - Conditioning for testing (ISO 2233:2000) |
2001-07-18 | |
EN ISO 2234:2002
(WI=00261048) Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load (ISO 2234:2000) |
2002-09-25 | |
EN ISO 2244:2002
(WI=00261049) Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests (ISO 2244:2000) |
2002-09-25 | |
EN ISO 2247:2002
(WI=00261053) Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency (ISO 2247:2000) |
2002-09-25 | |
EN ISO 2873:2002
(WI=00261050) Packaging - Complete, filled transport packages and unit loads - Low pressure test (ISO 2873:2000) |
2002-09-25 | |
EN ISO 2875:2002
(WI=00261052) Packaging - Complete, filled transport packages and unit loads - Water-spray test (ISO 2875:2000) |
2002-11-06 | |
EN ISO 28862:2023
(WI=00261488) Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products (ISO 28862:2018) |
2023-03-29 | |
EN ISO 4180:2019
(WI=00261455) Packaging - Complete, filled transport packages - General rules for the compilation of performance test schedules (ISO 4180:2019) |
2019-11-27 | |
EN ISO 445:2013
(WI=00261416) Pallets for materials handling - Vocabulary (ISO 445:2013) |
2013-02-20 | |
EN ISO 7458:2004
(WI=00261291) Glass containers - Internal pressure resistance - Test methods (ISO/FDIS 7458:2004) |
2004-03-01 | |
EN ISO 7459:2004
(WI=00261292) Glass containers - Thermal shock resistance and thermal shock endurance - Test methods (ISO 7459:2004) |
2004-03-01 | |
EN ISO 780:2015
(WI=00261402) Packaging - Distribution packaging - Graphical symbols for handling and storage of packages (ISO 780:2015) |
2015-12-16 | |
EN ISO 7965-1:2024
(WI=00261489) Packaging - Drop test - Part 1: Paper sacks (ISO 7965-1:2024) |
2024-04-10 | |
EN ISO 7965-2:1996
(WI=00261170) Sacks - Drop test - Part 2: Sacks made from thermoplastic flexible film (ISO 7965-2:1993) |
1996-08-21 | |
EN ISO 8106:2004
(WI=00261057) Glass containers - Determination of capacity by gravimetric method - Test method (ISO 8106:2004) |
2004-11-01 | |
EN ISO 8113:2004
(WI=00261293) Glass containers - Resistance to vertical load - Test method (ISO 8113:2004) |
2004-03-01 | |
EN ISO 8317:2015
(WI=00261418) Child-resistant packaging - Requirements and testing procedures for reclosable packages (ISO 8317:2015) |
2015-12-02 | |
EN ISO 8318:2002
(WI=00261054) Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency (ISO 8318:2000) |
2002-09-25 | |
EN ISO 8351-1:1996
(WI=00261174) Packaging - Method of specification for sacks - Part 1: Paper sacks (ISO 8351-1:1994) |
1996-08-21 | |
EN ISO 8351-2:1996
(WI=00261175) Packaging - Method of specification for sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8351-2:1994) |
1996-08-21 | |
EN ISO 8367-1:1996
(WI=00261171) Packaging - Dimensional tolerances for general purpose sacks - Part 1: Paper sacks (ISO 8367-1:1993) |
1996-08-21 | |
EN ISO 8367-2:1996
(WI=00261173) Packaging - Dimensional tolerances for general purpose sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8367-2:1993) |
1996-08-21 | |
EN ISO 8611-1:2022
(WI=00261474) Pallets for materials handling - Flat pallets - Part 1: Test methods (ISO 8611-1:2021) |
2022-01-12 | |
EN ISO 8611-2:2022
(WI=00261475) Pallets for materials handling - Flat pallets - Part 2: Performance requirements and selection of tests (ISO 8611-2:2021) |
2022-01-12 | |
EN ISO 8611-3:2012
(WI=00261403) Pallets for materials handling - Flat pallets - Part 3: Maximum working loads (ISO 8611-3:2011) |
2012-08-08 | |
EN ISO 90-1:1999
(WI=00261262) Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 1: Open-top cans (ISO 90-1:1997) |
1999-06-23 | |
EN ISO 90-2:1999
(WI=00261263) Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 2: General use containers (ISO 90-2:1997) |
1999-06-23 | |
EN ISO 90-3:2001
(WI=00261256) Light gauge metal containers - Definitions and determination of dimensions and capacities - Part 3: Aerosol cans (ISO 90-3:2000) |
2001-08-08 | |
EN ISO 9100-10:2005
(WI=00261278) Glass containers - Vacuum lug finishes - Part 10: 77 regular (ISO 9100-10:2005) |
2005-01-15 | |
EN ISO 9100-11:2005
(WI=00261279) Glass containers - Vacuum lug finishes - Part 11: 82 regular (ISO 9100-11:2005) |
2005-01-15 | |
EN ISO 9100-12:2005
(WI=00261280) Glass containers - Vacuum lug finishes - Part 12: 89 regular (ISO 9100-12:2005) |
2005-01-15 | |
EN ISO 9100-13:2005
(WI=00261281) Glass containers - Vacuum lug finishes - Part 13: 100 regular (ISO 9100-13:2005) |
2005-01-15 | |
EN ISO 9100-14:2005
(WI=00261282) Glass containers - Vacuum lug finishes - Part 14: 110 regular (ISO 9100-14:2005) |
2005-01-15 | |
EN ISO 9100-14:2005/AC:2009
(WI=00261C13) Glass containers - Vacuum lug finishes - Part 14: 110 regular (ISO 9100-14:2005/Cor 1:2008) |
2009-04-08 | |
EN ISO 9100-1:2005
(WI=00261269) Glass containers - Vacuum lug finishes - Part 1: General (ISO 9100-1:2005) |
2005-01-15 | |
EN ISO 9100-2:2005
(WI=00261270) Glass containers - Vacuum lug finishes - Part 2: 33 medium (ISO 9100-2:2005) |
2005-11-01 | |
EN ISO 9100-2:2005/AC:2009
(WI=00261C17) Glass containers - Vacuum lug finishes - Part 2: 33 medium - Technical Corrigendum 1 (ISO 9100-2:2005/Cor 1:2009) |
2009-11-15 | |
EN ISO 9100-3:2005
(WI=00261271) Glass containers - Vacuum lug finishes - Part 3: 38 regular (ISO 9100-3:2005) |
2005-11-01 | |
EN ISO 9100-3:2005/AC:2009
(WI=00261C15) Glass containers - Vacuum lug finishes - Part 3: 38 regular - Technical Corrigendum 1 (ISO 9100-3:2005/Cor 1:2009) |
2009-10-15 | |
EN ISO 9100-4:2005
(WI=00261272) Glass containers - Vacuum lug finishes - Part 4: 38 medium (ISO 9100-4:2005) |
2005-11-01 | |
EN ISO 9100-4:2005/AC:2009
(WI=00261C16) Glass containers - Vacuum lug finishes - Part 4: 38 medium - Technical Corrigendum 1 (ISO 9100-4:2005/Cor 1:2009) |
2009-10-15 | |
EN ISO 9100-5:2005
(WI=00261273) Glass containers - Vacuum lug finishes - Part 5: 43 and 48 regular (ISO 9100-5:2005) |
2005-01-15 | |
EN ISO 9100-6:2005
(WI=00261274) Glass containers - Vacuum lug finishes - Part 6: 53 and 58 regular (ISO 9100-6:2005) |
2005-01-15 | |
EN ISO 9100-7:2005
(WI=00261275) Glass containers - Vacuum lug finishes - Part 7: 58 deep (ISO 9100-7:2005) |
2005-01-15 | |
EN ISO 9100-8:2005
(WI=00261276) Glass containers - Vacuum lug finishes - Part 8: 63, 66 and 70 regular (ISO 9100-8:2005) |
2005-01-15 | |
EN ISO 9100-9:2005
(WI=00261277) Glass containers - Vacuum lug finishes - Part 9: 63, 66 and 70 deep (ISO 9100-9:2005) |
2005-01-15 |