The European Committee for Standardization is one of three European Standardization Organizations (together with CENELEC and ETSI) that have been officially recognized by the European Union and by the European Free Trade Association (EFTA) as being responsible for developing and defining voluntary standards at European level.
- |
Reference | EN 14679:2005 |
---|---|
Title | Execution of special geotechnical works - Deep mixing |
Work Item Number | 00288011 |
Abstract/Scope | This document specifies general principles for the execution, testing, supervision and monitoring of deep mixing works carried out by two different methods: dry mixing and wet mixing. Deep mixing considered in this document is limited to methods, which involve: a) mixing by rotating mechanical mixing tools (see Annex A, Figure A.1) where the lateral support provided to the surrounding soil is not removed; b) treatment of the soil to a minimum depth of 3 m; c) different shapes and configurations, consisting of either single columns, panels, grids, blocks, walls or any combination of more than one single column, overlapping or not (see Annex A, Figures A.8 to A.12); d) treatment of natural soil, fill, waste deposits and slurries, etc.; e) other ground improvement methods using similar techniques exist (see A.3.5). Guidance on practical aspects of deep mixing, such as execution procedures and equipment, is given in Annex A. Main applications are exemplified in Annex A, Figure A.14. Methods of testing, specification and assessment of design parameters, which are affected by execution, are presented in Annex B. |
Status |
Published
|
Reference Document | |
date of Availability (DAV) | 2005-04-13 |
ICS | 93.020 - Earthworks. Excavations. Foundation construction. Underground works |
A-Deviation(s) | |
Special National Condition(s) |
Directive(s) | |
---|---|
Mandate(s) | |
Citation in OJEU |
date of Ratification (DOR) (1) | 2005-02-28 |
---|---|
date of Availability (DAV) (2) | 2005-04-13 |
date of Announcement (DOA) (3) | 2005-07-31 |
date of Publication (DOP) (4) | 2005-10-31 |
date of Withdrawal (DOW) (5) |
Supersedes | |
---|---|
Superseded by |
prEN 14679 rev
prEN 14679 rev |
Normative reference (6) |
EN 12716
EN 196-1 EN 196-2 EN 196-21 EN 196-3 EN 196-5 EN 196-6 EN 196-7 EN 196-8 EN 197-1:2000
EN 197-2:2000
EN 1997-1
EN 1997-2 EN 451-1 EN 451-2 EN 459-1 EN 459-2 EN 791:1995
EN ISO 14688-1
EN ISO 14688-2 EN ISO 14689-1 ENV 10080 ENV 196-4 ENV 1991-1 |
Sales Points |
![]() |
(1) Date of ratification (dor) date when the Technical Board notes the approval of an EN (and HD for CENELEC), from which time the standard may be said to be approved
(2) Date of availability (dav) date when the definitive text in the official language versions of an approved CEN/CENELEC publication is distributed by the Central Secretariat
(3) Date of announcement (doa) latest date by which the existence of an EN (and HD for CENELEC), a TS or a CWA has to be announced at national level
(4) Date of publication (dop) latest date by which an EN has to be implemented at national level by publication of an identical national standard or by endorsement
(5) Date of withdrawal (dow) latest date by which national standards conflicting with an EN (and HD for CENELEC) have to be withdrawn
(6) This list of normative references is purely indicative. The only official list of normative reference is the list of the published standard.
In the case of undated standard, a link to the last dated version is provided.
In the case of series, a link to each standard identified in the series is provided.
We also invite you to check (via the website) whether corrigenda and/or amendments shall be read in conjunction with the main standard.