About CEN
The European Committee for Standardization is one of three European Standardization Organizations (together with CENELEC and ETSI) that have been officially recognized by the European Union and by the European Free Trade Association (EFTA) as being responsible for developing and defining voluntary standards at European level.
CEN/TC 290 |
- |
Dimensional and geometrical product specification and verification |
CEN/TC 290 Published Standards
|
Project reference, Title
|
Publication date
|
Sales Points
|
|---|---|---|
|
CEN ISO/TS 14253-4:2010
(WI=00290145) Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4: Background on functional limits and specification limits in decision rules (ISO/TS 14253-4:2010) |
2010-05-15 |
|
|
CEN ISO/TS 15530-1:2013
(WI=00290144) Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics (ISO/TS 15530-1:2013) |
2013-09-04 |
|
|
EN ISO 10360-10:2021
(WI=00290238) Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers (ISO 10360-10:2021) |
2021-09-15 |
|
|
EN ISO 10360-12:2016
(WI=00290198) Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 12: Articulated arm coordinate measurement machines (CMM) (ISO 10360-12:2016) |
2016-11-02 |
|
|
EN ISO 10360-13:2021
(WI=00290236) Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13: Optical 3D CMS (ISO 10360-13:2021) |
2021-09-22 |
|
|
EN ISO 10360-1:2000
(WI=00290056) Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000) |
2000-11-15 |
|
|
EN ISO 10360-1:2000/AC:2002
(WI=00290C01) Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000/Cor.1:2002) |
2002-12-18 |
|
|
EN ISO 10360-2:2009
(WI=00290105) Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009) |
2009-12-01 |
|
|
EN ISO 10360-3:2000
(WI=00290018) Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the forth axis (ISO 10360-3:2000) |
2000-03-15 |
|
|
EN ISO 10360-5:2020
(WI=00290228) Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5: Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (ISO 10360-5:2020) |
2020-04-15 |
|
|
EN ISO 10360-6:2001
(WI=00290059) Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001) |
2001-12-15 |
|
|
EN ISO 10360-6:2001/AC:2008
(WI=00290C04) Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007) |
2008-09-17 |
|
|
EN ISO 10360-7:2011
(WI=00290126) Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011) |
2011-06-01 |
|
|
EN ISO 10360-8:2013
(WI=00290152) Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013) |
2013-12-04 |
|
|
EN ISO 10360-9:2013
(WI=00290153) Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013) |
2013-12-18 |
|
|
EN ISO 10579:2013
(WI=00290173) Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011) |
2013-07-31 |
|
|
EN ISO 1101:2017
(WI=00290204) Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) |
2017-02-15 |
|
|
EN ISO 1119:2011
(WI=00290147) Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011) |
2011-12-15 |
|
|
EN ISO 12085:1997
(WI=00290021) Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996) |
1997-12-17 |
|
|
EN ISO 12085:1997/AC:2008
(WI=00290C12) Geometrical product specification (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996/Cor 1:1998) |
2008-10-15 |
|
|
EN ISO 12179:2022
(WI=00290225) Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021) |
2022-01-19 |
|
|
EN ISO 12180-1:2011
(WI=00290132) Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011) |
2011-04-01 |
|
|
EN ISO 12180-2:2011
(WI=00290133) Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011) |
2011-04-01 |
|
|
EN ISO 12181-1:2011
(WI=00290134) Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011) |
2011-04-01 |
|
|
EN ISO 12181-2:2011
(WI=00290135) Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011) |
2011-04-01 |
|
|
EN ISO 12780-1:2011
(WI=00290136) Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011) |
2011-04-01 |
|
|
EN ISO 12780-2:2011
(WI=00290137) Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011) |
2011-04-01 |
|
|
EN ISO 12781-1:2011
(WI=00290138) Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011) |
2011-04-01 |
|
|
EN ISO 12781-2:2011
(WI=00290139) Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011) |
2011-04-01 |
|
|
EN ISO 13102:2012
(WI=00290129) Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012) |
2012-08-15 |
|
|
EN ISO 13225:2012
(WI=00290111) Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012) |
2012-05-01 |
|
|
EN ISO 13385-1:2019
(WI=00290222) Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological characteristics of callipers (ISO 13385-1:2019) |
2019-09-18 |
|
|
EN ISO 13385-2:2020
(WI=00290237) Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020) |
2020-05-27 |
|
|
EN ISO 13565-1:1997
(WI=00290032) Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996) |
1997-12-17 |
|
|
EN ISO 14253-1:2017
(WI=00290216) Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017) |
2017-12-06 |
|
|
EN ISO 14253-2:2011
(WI=00290140) Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011) |
2011-04-15 |
|
|
EN ISO 14253-2:2011/AC:2013
(WI=00290C19) Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Technical Corrigendum 1 (ISO 14253-2:2011/Cor 1:2013) |
2013-07-24 |
|
|
EN ISO 14253-3:2011
(WI=00290143) Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011) |
2011-04-15 |
|
|
EN ISO 14253-5:2015
(WI=00290170) Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015) |
2015-09-16 |
|
|
EN ISO 14405-1:2016
(WI=00290195) Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016) |
2016-08-31 |
|
|
EN ISO 14405-2:2019
(WI=00290234) Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018) |
2019-01-23 |
|
|
EN ISO 14405-3:2017
(WI=00290188) Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016) |
2017-01-18 |
|
|
EN ISO 14406:2010
(WI=00290114) Geometrical product specifications (GPS) - Extraction (ISO 14406:2010) |
2010-12-15 |
|
|
EN ISO 14638:2015
(WI=00290158) Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015) |
2015-01-28 |
|
|
EN ISO 14978:2018
(WI=00290221) Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2018) |
2018-12-19 |
|
|
EN ISO 15530-3:2011
(WI=00290141) Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011) |
2011-10-15 |
|
|
EN ISO 1660:2017
(WI=00290193) Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017) |
2017-02-15 |
|
|
EN ISO 16610-1:2015
(WI=00290179) Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts (ISO 16610-1:2015) |
2015-04-22 |
|
|
EN ISO 16610-20:2015
(WI=00290176) Geometrical product specifications (GPS) - Filtration - Part 20: Linear profile filters: Basic concepts (ISO 16610-20:2015) |
2015-04-29 |
|
|
EN ISO 16610-21:2012
(WI=00290165) Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011) |
2012-08-08 |
|
|
EN ISO 16610-22:2015
(WI=00290182) Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters (ISO 16610-22:2015) |
2015-07-08 |
|
|
EN ISO 16610-28:2016
(WI=00290211) Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016) |
2016-12-21 |
|
|
EN ISO 16610-29:2020
(WI=00290217) Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Wavelets (ISO 16610-29:2020) |
2020-04-22 |
|
|
EN ISO 16610-30:2017
(WI=00290220) Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts (ISO 16610-30:2015) |
2017-01-11 |
|
|
EN ISO 16610-31:2016
(WI=00290210) Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016) |
2016-11-30 |
|
|
EN ISO 16610-40:2015
(WI=00290180) Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts (ISO 16610-40:2015) |
2015-06-03 |
|
|
EN ISO 16610-41:2015
(WI=00290181) Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters (ISO 16610-41:2015) |
2015-06-17 |
|
|
EN ISO 16610-49:2015
(WI=00290177) Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques (ISO 16610-49:2015) |
2015-06-03 |
|
|
EN ISO 16610-60:2015
(WI=00290184) Geometrical Product Specification (GPS) - Filtration - Part 60: Linear areal filters: Basic concepts (ISO 16610-60:2015) |
2015-11-18 |
|
|
EN ISO 16610-61:2015
(WI=00290186) Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters (ISO 16610-61:2015) |
2015-07-08 |
|
|
EN ISO 16610-61:2015/A1:2020
(WI=00290235) Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters - Amendment 1 (ISO 16610-61:2015/Amd 1:2019) |
2020-01-15 |
|
|
EN ISO 16610-62:2023
(WI=00290243) Geometrical product specifications (GPS) - Filtration - Part 62: Linear areal filters: Spline filters (ISO 16610-62:2023) |
2023-03-08 |
|
|
EN ISO 16610-71:2014
(WI=00290166) Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014) |
2014-09-24 |
|
|
EN ISO 16610-85:2013
(WI=00290167) Geometrical product specifications (GPS) - Filtration- Part 85: Morphological areal filters: Segmentation (ISO 16610-85:2013) |
2013-02-06 |
|
|
EN ISO 17450-1:2011
(WI=00290142) Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011) |
2011-12-15 |
|
|
EN ISO 17450-2:2012
(WI=00290146) Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
2012-10-01 |
|
|
EN ISO 17450-3:2016
(WI=00290189) Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016) |
2016-06-22 |
|
|
EN ISO 17450-4:2018
(WI=00290202) Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017) |
2018-01-31 |
|
|
EN ISO 18183-1:2024
(WI=00290244) Geometrical product specifications (GPS) - Partition - Part 1: Vocabulary and basic concepts (ISO 18183-1:2024) |
2024-04-03 |
|
|
EN ISO 18183-2:2024
(WI=00290245) Geometrical product specifications (GPS) - Partition - Part 2: Nominal model (ISO 18183-2:2024) |
2024-02-14 |
|
|
EN ISO 18183-3:2024
(WI=00290246) Geometrical product specifications (GPS) - Partition - Part 3: Methods used for specification and verification (ISO 18183-3:2024) |
2024-02-14 |
|
|
EN ISO 18391:2016
(WI=00290187) Geometrical product specifications (GPS) - Population specification (ISO 18391:2016) |
2016-11-02 |
|
|
EN ISO 1938-1:2015
(WI=00290159) Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) |
2015-11-18 |
|
|
EN ISO 1938-2:2017
(WI=00290203) Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017) |
2017-02-08 |
|
|
EN ISO 1:2022
(WI=00290249) Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2022) |
2022-06-29 |
|
|
EN ISO 20170:2019
(WI=00290212) Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019) |
2019-05-15 |
|
|
EN ISO 21204:2020
(WI=00290230) Geometrical product specifications (GPS) - Transition specification (ISO 21204:2020) |
2020-03-11 |
|
|
EN ISO 21920-1:2022
(WI=00290223) Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture (ISO 21920-1:2021) |
2022-01-19 |
|
|
EN ISO 21920-2:2022
(WI=00290224) Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021, Corrected version 2022-06) |
2022-01-19 |
|
|
EN ISO 21920-3:2022
(WI=00290226) Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators (ISO 21920-3:2021) |
2022-01-19 |
|
|
EN ISO 22081:2021
(WI=00290229) Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021) |
2021-02-17 |
|
|
EN ISO 22432:2011
(WI=00290107) Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011) |
2011-11-15 |
|
|
EN ISO 25178-1:2016
(WI=00290151) Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016) |
2016-04-20 |
|
|
EN ISO 25178-2:2022
(WI=00290231) Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2021, Corrected version 2023-11) |
2022-01-19 |
|
|
EN ISO 25178-3:2012
(WI=00290117) Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012) |
2012-07-01 |
|
|
EN ISO 25178-600:2019
(WI=00290215) Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019) |
2019-04-10 |
|
|
EN ISO 25178-601:2010
(WI=00290120) Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010) |
2010-07-01 |
|
|
EN ISO 25178-602:2010
(WI=00290121) Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010) |
2010-07-01 |
|
|
EN ISO 25178-603:2013
(WI=00290122) Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013) |
2013-10-02 |
|
|
EN ISO 25178-604:2013
(WI=00290127) Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013) |
2013-08-07 |
|
|
EN ISO 25178-605:2014
(WI=00290150) Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014) |
2014-01-22 |
|
|
EN ISO 25178-606:2015
(WI=00290169) Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015) |
2015-06-17 |
|
|
EN ISO 25178-607:2019
(WI=00290214) Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2018) |
2019-04-10 |
|
|
EN ISO 25178-6:2010
(WI=00290118) Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010) |
2010-02-01 |
|
|
EN ISO 25178-700:2023
(WI=00290241) Geometrical product specifications (GPS) - Surface texture: Areal - Part 700: Calibration, adjustment and verification of areal topography measuring instruments (ISO 25178-700:2022) |
2023-01-11 |
|
|
EN ISO 25178-701:2010
(WI=00290123) Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010) |
2010-07-01 |
|
|
EN ISO 25178-70:2014
(WI=00290163) Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014) |
2014-02-19 |
|
|
EN ISO 25178-71:2017
(WI=00290197) Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017) |
2017-10-11 |
|
|
EN ISO 25178-72:2017
(WI=00290192) Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017) |
2017-06-07 |
|
|
EN ISO 25178-72:2017/A1:2020
(WI=00290239) Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p - Amendment 1 (ISO 25178-72:2017/Amd 1:2020) |
2020-09-23 |
|
|
EN ISO 25178-73:2019
(WI=00290213) Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019) |
2019-06-12 |
|
|
EN ISO 25378:2011
(WI=00290112) Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011) |
2011-04-01 |
|
|
EN ISO 2538-1:2014
(WI=00290148) Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014) |
2014-09-03 |
|
|
EN ISO 2538-2:2014
(WI=00290157) Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014) |
2014-09-03 |
|
|
EN ISO 2692:2021
(WI=00290232) Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2021) |
2021-06-23 |
|
|
EN ISO 286-1:2010
(WI=00290085) Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010) |
2010-04-15 |
|
|
EN ISO 286-1:2010/AC:2013
(WI=00290C20) Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits - Technical Corrigendum 1 (ISO 286-1:2010/Cor 1:2013) |
2013-08-07 |
|
|
EN ISO 286-2:2010
(WI=00290149) Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010) |
2010-06-15 |
|
|
EN ISO 286-2:2010/AC:2013
(WI=00290C21) Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013) |
2013-08-07 |
|
|
EN ISO 3040:2016
(WI=00290205) Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016) |
2016-05-04 |
|
|
EN ISO 3274:1997
(WI=00290011) Geometrical product specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996) |
1997-11-19 |
|
|
EN ISO 3611:2023
(WI=00290240) Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements (ISO 3611:2023) |
2023-05-31 |
|
|
EN ISO 3650:1998
(WI=00290012) Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998) |
1998-12-15 |
|
|
EN ISO 3650:1998/AC:2009
(WI=00290C14) Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998/Cor 1:2008) |
2009-03-25 |
|
|
EN ISO 4351:2023
(WI=00290247) Geometrical product specifications (GPS) - Association (ISO 4351:2023) |
2023-12-20 |
|
|
EN ISO 463:2006
(WI=00290008) Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006) |
2006-03-01 |
|
|
EN ISO 463:2006/AC:2009
(WI=00290C15) Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006/Cor 1:2007/Cor 2:2009) |
2009-03-11 |
|
|
EN ISO 5436-1:2000
(WI=00290031) Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures (ISO 5436-1:2000) |
2000-03-15 |
|
|
EN ISO 5436-2:2012
(WI=00290172) Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012) |
2012-10-01 |
|
|
EN ISO 5458:2018
(WI=00290196) Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018) |
2018-06-06 |
|
|
EN ISO 5459:2011
(WI=00290089) Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011) |
2011-08-15 |
|
|
EN ISO 5463:2024
(WI=00290248) Geometrical product specifications (GPS) - Rotary axis form-measuring instruments - Design and metrological characteristics (ISO 5463:2024) |
2024-09-25 |
|
|
EN ISO 8015:2011
(WI=00290108) Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
2011-06-01 |
|
|
EN ISO 8785:1999
(WI=00290052) Geometrical product specification (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998) |
1999-07-14 |
|
|
EN ISO 9493:2010
(WI=00290124) Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010) |
2010-11-01 |
|