The European Committee for Standardization is one of three European Standardization Organizations (together with CENELEC and ETSI) that have been officially recognized by the European Union and by the European Free Trade Association (EFTA) as being responsible for developing and defining voluntary standards at European level.
- |
Reference | EN 14475:2006 |
---|---|
Title | Execution of special geotechnical works - Reinforced fill |
Work Item Number | 00288014 |
Abstract/Scope | 1.1 This European Standard establishes general principles for the construction of reinforced fill. 1.2 This European Standard covers engineered fills that are reinforced by the inclusion of horizontal or sub-horizontal reinforcement placed between layers of fill during construction. 1.3 The scope of reinforced fill applications considered in this European Standard includes (Figure 1): ¾ earth retaining structures, (vertical, battered or inclined walls, bridge abutments, bulk storage facilities), with a facing to retain fill placed between the reinforcing layers; ¾ reinforced steep slopes with a facing, either built-in or added or wrap-around, reinforced shallow slopes without a facing, but covered by some form of erosion protection without a facing, reinstatement of failed slopes; ¾ embankments with basal reinforcement and embankments with reinforcement against frost heave in the upper part. Principles for the execution of other special geotechnical works using soil nails, bored piles, displacement piles, micro piles, sheet pile walls, diaphragm walls, grouting or jet grouting are established in other European Standards. Reinforcement of road pavements is not covered by this Standard. |
Status |
Published
|
Reference Document | |
date of Availability (DAV) | 2006-01-18 |
ICS | 93.020 - Earthworks. Excavations. Foundation construction. Underground works |
A-Deviation(s) | |
Special National Condition(s) |
Directive(s) | |
---|---|
Mandate(s) | |
Citation in OJEU |
date of Ratification (DOR) (1) | 2005-11-10 |
---|---|
date of Availability (DAV) (2) | 2006-01-18 |
date of Announcement (DOA) (3) | 2006-04-30 |
date of Publication (DOP) (4) | 2006-07-31 |
date of Withdrawal (DOW) (5) | 2006-07-31 |
Supersedes | |
---|---|
Superseded by | |
Normative reference (6) |
EN 10025-2
EN 10025-4 EN 10079 EN 10080 EN 10218-1 EN 10218-2 EN 10223-3 EN 10223-4 EN 10244-1 EN 10244-2 EN 10245-1 EN 10245-2 EN 10245-3 EN 10326 EN 12224 EN 12225 EN 13251 EN 1990 EN 1991-1-1 EN 1992-1-1 EN 1997-1 EN 206-1 EN ISO 10320 EN ISO 12957-1 EN ISO 13431 EN ISO 1461 EN ISO 2063 EN ISO 898-1 ENV ISO 10722-1 |
Sales Points |
(1) Date of ratification (dor) date when the Technical Board notes the approval of an EN (and HD for CENELEC), from which time the standard may be said to be approved
(2) Date of availability (dav) date when the definitive text in the official language versions of an approved CEN/CENELEC publication is distributed by the Central Secretariat
(3) Date of announcement (doa) latest date by which the existence of an EN (and HD for CENELEC), a TS or a CWA has to be announced at national level
(4) Date of publication (dop) latest date by which an EN has to be implemented at national level by publication of an identical national standard or by endorsement
(5) Date of withdrawal (dow) latest date by which national standards conflicting with an EN (and HD for CENELEC) have to be withdrawn
(6) This list of normative references is purely indicative. The only official list of normative reference is the list of the published standard.
In the case of undated standard, a link to the last dated version is provided.
In the case of series, a link to each standard identified in the series is provided.
We also invite you to check (via the website) whether corrigenda and/or amendments shall be read in conjunction with the main standard.