The European Committee for Standardization is one of three European Standardization Organizations (together with CENELEC and ETSI) that have been officially recognized by the European Union and by the European Free Trade Association (EFTA) as being responsible for developing and defining voluntary standards at European level.
- |
Reference | EN 10253-4:2008 |
---|---|
Title | Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements |
Work Item Number | EC110072 |
Abstract/Scope | 1.1 This European Standard specifies the technical delivery requirements for seamless and welded butt-welding fittings (elbows, concentric and eccentric reducers, equal and reducing tees, caps) made of austenitic and austenitic-ferritic (duplex) stainless steel which are intended for pressure and corrosion resisting purposes at room temperature, at low temperature or at elevated temperatures. It specifies: the type of fittings; type A (see 7.2) type B (see 7.3) the steel grades; the mechanical properties; the dimensions and tolerances; the requirements for inspection and testing; the inspection documents; the marking; the handling and packaging. NOTE In the case of a harmonised supporting standard for materials, presumption of conformity to the Essential Requirement(s) (ESRs) is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific item of equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive (PED) are satisfied. 1.2 Unless otherwise specified in this European Standard the general technical delivery requirements in EN 10021 apply. |
Status |
Published
|
Reference Document | |
date of Availability (DAV) | 2008-03-19 |
ICS | 23.040.40 - Metal fittings 77.140.20 - Stainless steels |
A-Deviation(s) | |
Special National Condition(s) |
Directive(s) | 2014/68/EU, 97/23/EC |
---|---|
Mandate(s) | M/071 |
Citation in OJEU | C 293/01 (2016-08-12) for Directive 2014/68/EU, C 46 (2009-02-25) for Directive 97/23/EC |
date of Ratification (DOR) (1) | 2008-01-05 |
---|---|
date of Availability (DAV) (2) | 2008-03-19 |
date of Announcement (DOA) (3) | 2008-06-30 |
date of Publication (DOP) (4) | 2008-09-30 |
date of Withdrawal (DOW) (5) | 2008-09-30 |
Supersedes | |
---|---|
Superseded by | FprEN 10253-4 |
Normative reference (6) |
EN 10002-1
EN 10002-5 EN 10021:2006 EN 10027-1 EN 10027-2 EN 10028-7 EN 10088-2 EN 10168 EN 10204 EN 10216-5 EN 10217-7 EN 10266:2003 EN 10272 EN 13445-3 EN 13480-3:2002
EN 1418
EN 287-1 EN 473 EN 910 EN ISO 1127 EN ISO 14284 EN ISO 15614-1 EN ISO 3166-1 EN ISO 3651-2 EN ISO 377:1997
EN ISO 6708
|
Sales Points |
![]() |
(1) Date of ratification (dor) date when the Technical Board notes the approval of an EN (and HD for CENELEC), from which time the standard may be said to be approved
(2) Date of availability (dav) date when the definitive text in the official language versions of an approved CEN/CENELEC publication is distributed by the Central Secretariat
(3) Date of announcement (doa) latest date by which the existence of an EN (and HD for CENELEC), a TS or a CWA has to be announced at national level
(4) Date of publication (dop) latest date by which an EN has to be implemented at national level by publication of an identical national standard or by endorsement
(5) Date of withdrawal (dow) latest date by which national standards conflicting with an EN (and HD for CENELEC) have to be withdrawn
(6) This list of normative references is purely indicative. The only official list of normative reference is the list of the published standard.
In the case of undated standard, a link to the last dated version is provided.
In the case of series, a link to each standard identified in the series is provided.
We also invite you to check (via the website) whether corrigenda and/or amendments shall be read in conjunction with the main standard.