About CEN
The European Committee for Standardization is one of three European Standardization Organizations (together with CENELEC and ETSI) that have been officially recognized by the European Union and by the European Free Trade Association (EFTA) as being responsible for developing and defining voluntary standards at European level.
- |
Project
| Reference | prEN 15129-6 rev |
|---|---|
| Title | Anti-seismic devices — Part 6: Curved and Flat Surface Sliders |
| Work Item Number | 00340015 |
| Abstract/Scope | 8. Scope of the proposed work item (max 4000 characters) This document specifies procedures for assessment and verification of constancy of performance (AVCP) of Curved and Flat Surface Sliders in relation to their characteristics. Curved and Flat Surface Sliders, which are types of anti-seismic devices, with main functions in accordance with 3.1.1 and 3.1.2, are intended to be used for building and civil engineering construction works. This document comprises the following types of Curved and Flat Surface Sliders: 1. Curved Surface Sliders (CSS, 3.1.1) (spherical and cylindrical) of the following types: a) single curved surface slider, b) double curved surface slider with rigid slider, c) double curved surface slider with articulated slider, d) multiple curved surface slider with rigid slider, e) multiple curved surface slider with articulated slider, and 2. Flat Surface Sliders (FSS, 3.1.2). This document comprises Curved and Flat Surface Sliders with some or all of the following parts: a) backing plates without lightening hollows and without ribs, b) slider without or with hinge, c) mating elements, d) sliding sheets, undimpled or dimpled, without or with lubricant (being in contact with mating element), e) containment rings (for controlling the CSS/FSS kinematics but not limiting the CSS/FSS displacement capacity). This document comprises Curved and Flat Surface Sliders with the following materials: a) for backing plates without hard chromium plating and for sliders: — steel in accordance with EN 10025:2019 (all parts), — cast iron in accordance with ISO 1083:2018, — cast carbon steel in accordance with ISO 14737:2015, or — stainless steel in accordance with EN 10088:2014 (all parts); b) for backing plates with hard chromium plating: — steel grade S355J2(+N) in accordance with EN 10025-2:2019, or — fine grain steel of the same or higher grade in accordance with EN 10025:2019 (all parts); c) for mating elements: — austenitic steel with thickness of at least 2,5 mm in accordance with EN 10088 2:2014, 1.4401 + 2B or 1.4404 +2B, — backing plates with at least 100 µm hard chromium plating in accordance with EN ISO 6158:2018; d) for sliding sheets with and without lubrication: — UHMWPE (Ultra High Molecular Weight Polyethylene), — PTFE (polytetrafluoroethylene) in accordance with EN 1337 2:2004 (Clause 5.2), — fluorpolymer made of claimed PTFE (polytetrafluoroethylene), or — PTFE filled with solid lubricant and reinforcing fibres; e) lubricants in accordance with EN 1337 2:2004 (5.8). This document does not comprise: a) vertical seismic isolation systems, b) CSS/FSS with restrainers limiting their displacement capacity, and c) CSS/FSS with accumulated sliding path less than 1 000 m. |
| Status |
Under Drafting
|
| Reference Document | |
| date of Availability (DAV) | |
| ICS | |
| A-Deviation(s) | |
| Special National Condition(s) |
Legal
| Directive(s) | 305/2011 |
|---|---|
| Mandate(s) | M/132 |
| Citation in OJEU | Citation expected for Directive 305/2011 |
Implementation Dates
| date of Ratification (DOR) (1) | |
|---|---|
| date of Availability (DAV) (2) | |
| date of Announcement (DOA) (3) | |
| date of Publication (DOP) (4) | |
| date of Withdrawal (DOW) (5) |
Relations
| Supersedes | EN 15129:2018 |
|---|---|
| Superseded by |
(1) Date of ratification (dor) date when the Technical Board notes the approval of an EN (and HD for CENELEC), from which time the standard may be said to be approved
(2) Date of availability (dav) date when the definitive text in the official language versions of an approved CEN/CENELEC publication is distributed by the Central Secretariat
(3) Date of announcement (doa) latest date by which the existence of an EN (and HD for CENELEC), a TS or a CWA has to be announced at national level
(4) Date of publication (dop) latest date by which an EN has to be implemented at national level by publication of an identical national standard or by endorsement
(5) Date of withdrawal (dow) latest date by which national standards conflicting with an EN (and HD for CENELEC) have to be withdrawn
(6) This list of normative references is purely indicative. The only official list of normative reference is the list of the published standard.
In the case of undated standard, a link to the last dated version is provided.
In the case of series, a link to each standard identified in the series is provided.
We also invite you to check (via the website) whether corrigenda and/or amendments shall be read in conjunction with the main standard.