About CEN
The European Committee for Standardization is one of three European Standardization Organizations (together with CENELEC and ETSI) that have been officially recognized by the European Union and by the European Free Trade Association (EFTA) as being responsible for developing and defining voluntary standards at European level.
CEN/TC 139 |
- |
Paints and varnishes |
CEN/TC 139 Published Standards
|
Project reference, Title
|
Publication date
|
Sales Points
|
|---|---|---|
|
CEN ISO/TR 11594:2022
(WI=00139775) Best practices for the creation/evaluation of fingerprint analysis in accordance with the ISO 28199 series (ISO/TR 11594:2022) |
2022-11-23 |
|
|
CEN ISO/TR 19402:2020
(WI=00139693) Paints and varnishes - Adhesion of coatings (ISO/TR 19402:2018) |
2020-10-07 |
|
|
CEN ISO/TR 21555:2020
(WI=00139710) Paints and varnishes - Overview of test methods on hardness and wear resistance of coatings (ISO/TR 21555:2019) |
2020-10-07 |
|
|
CEN ISO/TR 5601:2024
(WI=00139815) Paints and varnishes - Determination of volatile organic compound (VOC) and/or semi-volatile organic compound (SVOC) content - Best practices for the selection of test methods (ISO/TR 5601:2023) |
2024-06-05 |
|
|
CEN ISO/TR 5602:2022
(WI=00139777) Sources of error in the use of electrochemical impedance spectroscopy for the investigation of coatings and other materials (ISO/TR 5602:2021) |
2022-11-23 |
|
|
CEN ISO/TS 19392-1:2022
(WI=00139758) Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 1: Minimum requirements and weathering (ISO/TS 19392-1:2018) |
2022-06-29 |
|
|
CEN ISO/TS 19392-2:2022
(WI=00139756) Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 2: Determination and evaluation of resistance to rain erosion using rotating arm (ISO/TS 19392-2:2018) |
2022-06-29 |
|
|
CEN ISO/TS 19392-3:2022
(WI=00139757) Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 3: Determination and evaluation of resistance to rain erosion using water jet (ISO/TS 19392-3:2018) |
2022-06-29 |
|
|
CEN ISO/TS 19392-5:2024
(WI=00139814) Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 5: Measurement of transmittance properties of UV protective coatings (ISO/TS 19392-5:2023) |
2024-07-03 |
|
|
CEN ISO/TS 19392-6:2024
(WI=00139813) Paints and varnishes - Coating systems for wind-turbine rotor blades - Part 6: Determination and evaluation of ice adhesion using centrifuge (ISO/TS 19392-6:2023) |
2024-07-03 |
|
|
CEN ISO/TS 19397:2018
(WI=00139602) Determination of the film thickness of coatings using an ultrasonic gage (ISO/TS 19397:2015) |
2018-03-28 |
|
|
CEN ISO/TS 23973:2021
(WI=00139739) Liquid chromatography at critical conditions (LCCC) - Chemical heterogeneity of polyethylene oxides (ISO/TS 23973:2020) |
2021-12-15 |
|
|
CEN/TS 16360:2021
(WI=00139674) Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of film extensibility by indentation of a coating on a wooden substrate |
2021-06-23 |
|
|
CEN/TS 16498:2013
(WI=00139454) Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of tannin staining |
2013-11-06 |
|
|
CEN/TS 16969:2016
(WI=00139542) Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of end grain sealing performance |
2016-07-27 |
|
|
CEN/TS 927-12:2023
(WI=00139762) Paints and varnishes - Coating materials and coating systems for exterior wood - Part 12: Ultraviolet and visible radiation transmittance |
2023-05-03 |
|
|
CEN/TS 927-15:2024
(WI=00139766) Paints and varnishes - Coating materials and coating systems for exterior wood - Part 15: Assessment of bleeding of coloured wood extractives through a coating by means of a water immersion test |
2024-10-02 |
|
|
CEN/TS 927-8:2020
(WI=00139657) Paints and varnishes - Coating materials and coating systems for exterior wood - Part 8: Determination of the adhesion on wood after water exposure by a double-X-cut test |
2020-02-19 |
|
|
CEN/TS 927-9:2023
(WI=00139759) Paints and varnishes - Coating materials and coating systems for exterior wood - Part 9: Determination of pull-off strength |
2023-01-25 |
|
|
EN 1062-11:2002
(WI=00139133) Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 11: Methods of conditioning before testing |
2002-07-10 |
|
|
EN 1062-11:2002/AC:2005
(WI=00139C06) Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 11: Methods of conditioning before testing |
2005-03-09 |
|
|
EN 1062-1:2004
(WI=00139167) Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 1: Classification |
2004-06-09 |
|
|
EN 1062-3:2008
(WI=00139331) Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability |
2008-01-16 |
|
|
EN 1062-6:2002
(WI=00139069) Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability |
2002-07-10 |
|
|
EN 1062-7:2004
(WI=00139070) Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties |
2004-05-19 |
|
|
EN 12206-1:2021
(WI=00139669) Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from thermosetting coating powder |
2021-05-12 |
|
|
EN 13300:2022
(WI=00139662) Paints and varnishes - Paints and varnishes for interior walls and ceilings - Classification |
2022-11-23 |
|
|
EN 13438:2013
(WI=00139432) Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes |
2013-09-04 |
|
|
EN 13523-0:2021
(WI=00139676) Coil coated metals - Test methods - Part 0: General introduction |
2021-10-13 |
|
|
EN 13523-10:2024
(WI=00139787) Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation |
2024-04-24 |
|
|
EN 13523-11:2019
(WI=00139621) Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test) |
2019-09-18 |
|
|
EN 13523-12:2024
(WI=00139793) Coil coated metals - Test methods - Part 12: Resistance to scratching |
2024-04-24 |
|
|
EN 13523-13:2014
(WI=00139467) Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat |
2014-06-18 |
|
|
EN 13523-14:2023
(WI=00139755) Coil coated metals - Test methods - Part 14: Chalking (Helmen method) |
2023-03-15 |
|
|
EN 13523-16:2004
(WI=00139249) Coil coated metals - Test methods - Part 16: Resistance to abrasion |
2004-11-17 |
|
|
EN 13523-17:2019
(WI=00139622) Coil coated metals - Test methods - Part 17: Adhesion of strippable films |
2019-09-18 |
|
|
EN 13523-18:2020
(WI=00139663) Coil coated metals - Test methods - Part 18: Resistance to staining |
2020-06-03 |
|
|
EN 13523-19:2019
(WI=00139623) Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing |
2019-09-18 |
|
|
EN 13523-1:2024
(WI=00139792) Coil coated metals - Test methods - Part 1: Film thickness |
2024-04-24 |
|
|
EN 13523-20:2020
(WI=00139668) Coil coated metals - Test methods - Part 20: Foam adhesion |
2020-06-03 |
|
|
EN 13523-21:2024
(WI=00139789) Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels |
2024-04-24 |
|
|
EN 13523-22:2024
(WI=00139794) Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison |
2024-04-24 |
|
|
EN 13523-23:2023
(WI=00139761) Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide |
2023-10-18 |
|
|
EN 13523-24:2017
(WI=00139570) Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking |
2017-07-26 |
|
|
EN 13523-25:2022
(WI=00139681) Coil coated metals - Test methods - Part 25: Resistance to humidity |
2022-02-09 |
|
|
EN 13523-26:2022
(WI=00139685) Coil coated metals - Test methods - Part 26: Resistance to condensation of water |
2022-02-09 |
|
|
EN 13523-27:2017
(WI=00139560) Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test) |
2017-04-05 |
|
|
EN 13523-29:2024
(WI=00139790) Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping) |
2024-04-24 |
|
|
EN 13523-2:2021
(WI=00139678) Coil coated metals - Test methods - Part 2: Gloss |
2021-10-13 |
|
|
EN 13523-3:2024
(WI=00139791) Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison |
2024-04-24 |
|
|
EN 13523-4:2014
(WI=00139464) Coil coated metals - Test methods - Part 4: Pencil hardness |
2014-07-30 |
|
|
EN 13523-5:2014
(WI=00139458) Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test) |
2014-06-18 |
|
|
EN 13523-6:2020
(WI=00139664) Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test) |
2020-06-03 |
|
|
EN 13523-7:2021
(WI=00139680) Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) |
2021-10-13 |
|
|
EN 13523-8:2024
(WI=00139788) Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
2024-04-24 |
|
|
EN 13523-9:2022
(WI=00139679) Coil coated metals - Test methods - Part 9: Resistance to water immersion |
2022-02-09 |
|
|
EN 15060:2006
(WI=00139162) Paints and varnishes - Guide for the classification and selection of coating systems for wood based materials in furniture for interior use |
2006-08-02 |
|
|
EN 15457:2022
(WI=00139683) Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi |
2022-03-02 |
|
|
EN 15458:2022
(WI=00139686) Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae |
2022-03-02 |
|
|
EN 15773:2018
(WI=00139569) Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines |
2018-01-17 |
|
|
EN 16074:2019
(WI=00139625) Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials |
2019-09-18 |
|
|
EN 16105:2023
(WI=00139722) Paints and varnishes - Laboratory method for determination of release of regulated dangerous substances from coatings in intermittent contact with water |
2023-01-25 |
|
|
EN 16402:2019
(WI=00139593) Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing |
2019-02-27 |
|
|
EN 16492:2014
(WI=00139475) Paints and varnishes - Evaluation of the surface disfigurement caused by fungi and algae on coatings |
2014-06-11 |
|
|
EN 16566:2014
(WI=00139468) Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to European standards |
2014-05-28 |
|
|
EN 16623:2015
(WI=00139443) Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking |
2015-02-18 |
|
|
EN 23270:1991
(WI=00139010) Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing (ISO 3270:1984) |
1991-08-08 |
|
|
EN 927-10:2019
(WI=00139591) Paints and varnishes - Coating materials and coating systems for exterior wood - Part 10: Resistance to blocking of paints and varnishes on wood |
2019-05-01 |
|
|
EN 927-11:2020
(WI=00139617) Paints and varnishes - Coating materials and coating systems for exterior wood - Part 11: Assessment of air inclusions/microfoam in coating films |
2020-04-22 |
|
|
EN 927-13:2019
(WI=00139620) Paints and varnishes - Coating materials and coating systems for exterior wood - Part 13: Assessment of resistance to impact of a coating on a wooden substrate |
2019-09-18 |
|
|
EN 927-14:2023
(WI=00139661) Paints and varnishes - Coating materials and coating systems for exterior wood - Part 14: Determination of tensile properties of coating films |
2023-01-25 |
|
|
EN 927-1:2013
(WI=00139430) Paints and varnishes - Coating materials and coating systems for exterior wood - Part 1: Classification and selection |
2013-02-27 |
|
|
EN 927-2:2022
(WI=00139721) Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Performance specification |
2022-11-23 |
|
|
EN 927-3:2019
(WI=00139615) Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test |
2019-09-18 |
|
|
EN 927-5:2023
(WI=00139675) Paints and varnishes - Coating materials and coating systems for exterior wood - Part 5: Assessment of the liquid water permeability |
2023-06-07 |
|
|
EN 927-6:2018
(WI=00139559) Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water |
2018-10-10 |
|
|
EN 927-7:2020
(WI=00139616) Paints and varnishes - Coating materials and coating systems for exterior wood - Part 7: Assessment of knot staining resistance of wood coatings |
2020-04-22 |
|
|
EN ISO 10283:2007
(WI=00139328) Binders for paints and varnishes - Determination of monomeric diisocyanates in isocyanate resins (ISO 10283:2007) |
2007-09-01 |
|
|
EN ISO 10890:2010
(WI=00139356) Paints and varnishes - Modelling of biocide release rate from antifouling paints by mass-balance calculation (ISO 10890:2010) |
2010-10-15 |
|
|
EN ISO 10927:2018
(WI=00139594) Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018) |
2018-07-11 |
|
|
EN ISO 11124-1:2018
(WI=00139521) Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11124-1:2018) |
2018-09-26 |
|
|
EN ISO 11124-2:2018
(WI=00139522) Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:2018, Corrected version 2018-12) |
2018-09-26 |
|
|
EN ISO 11124-3:2018
(WI=00139523) Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit (ISO 11124-3:2018) |
2018-10-17 |
|
|
EN ISO 11124-4:2018
(WI=00139524) Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:2018) |
2018-09-26 |
|
|
EN ISO 11124-5:2021
(WI=00139673) Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 5: Cut steel wire (ISO 11124-5:2019) |
2021-04-14 |
|
|
EN ISO 11125-1:2018
(WI=00139525) Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:2018) |
2018-10-31 |
|
|
EN ISO 11125-2:2018
(WI=00139526) Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:2018, Corrected version 2019-04) |
2018-09-26 |
|
|
EN ISO 11125-3:2018
(WI=00139527) Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:2018) |
2018-09-26 |
|
|
EN ISO 11125-4:2018
(WI=00139528) Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density (ISO 11125-4:2018) |
2018-09-26 |
|
|
EN ISO 11125-5:2018
(WI=00139529) Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:2018) |
2018-09-26 |
|
|
EN ISO 11125-6:2018
(WI=00139530) Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter (ISO 11125-6:2018) |
2018-09-26 |
|
|
EN ISO 11125-7:2018
(WI=00139531) Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture (ISO 11125-7:2018) |
2018-10-31 |
|
|
EN ISO 11125-9:2022
(WI=00139760) Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 9: Wear testing and performance (ISO 11125-9:2021) |
2022-06-22 |
|
|
EN ISO 11126-10:2017
(WI=00139452) Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO 11126-10:2017) |
2017-12-13 |
|
|
EN ISO 11126-1:2018
(WI=00139532) Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11126-1:2018) |
2018-10-03 |
|
|
EN ISO 11126-3:2018
(WI=00139533) Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:2018) |
2018-10-03 |
|
|
EN ISO 11126-4:2018
(WI=00139534) Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:2018) |
2018-10-03 |
|
|
EN ISO 11126-5:2018
(WI=00139535) Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel slag (ISO 11126-5:2018) |
2018-10-17 |
|
|
EN ISO 11126-6:2018
(WI=00139536) Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron and steel slags (ISO 11126-6:2018) |
2018-10-03 |
|
|
EN ISO 11126-7:2018
(WI=00139537) Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:2018) |
2018-10-03 |
|
|
EN ISO 11126-8:2018
(WI=00139538) Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine (ISO 11126-8:2018, Corrected version 2018-11) |
2018-10-03 |
|
|
EN ISO 11126-9:2004
(WI=00139233) Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite (ISO 11126-9:1999) |
2004-12-22 |
|
|
EN ISO 11127-1:2021
(WI=00139627) Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127-1:2020) |
2021-02-24 |
|
|
EN ISO 11127-2:2021
(WI=00139628) Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:2020) |
2021-02-24 |
|
|
EN ISO 11127-3:2021
(WI=00139629) Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:2020) |
2021-02-24 |
|
|
EN ISO 11127-4:2020
(WI=00139630) Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:2020) |
2020-10-28 |
|
|
EN ISO 11127-5:2021
(WI=00139631) Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:2020) |
2021-02-24 |
|
|
EN ISO 11127-6:2022
(WI=00139712) Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:2022) |
2022-11-16 |
|
|
EN ISO 11127-7:2022
(WI=00139713) Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water-soluble chlorides (ISO 11127-7:2022) |
2022-11-30 |
|
|
EN ISO 11668:2001
(WI=00139193) Binders for paints and varnishes - Chlorinated polymerization resins - General methods of test (ISO 11668:1997) |
2001-08-08 |
|
|
EN ISO 11890-1:2024
(WI=00139740) Paints and varnishes - Determination of volatile organic compounds (VOC) and/or semi volatile organic compounds (SVOC) content - Part 1: Gravimetric method for VOC determination (ISO 11890-1:2024) |
2024-05-22 |
|
|
EN ISO 11890-2:2020
(WI=00139599) Paints and varnishes - Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2020) |
2020-07-08 |
|
|
EN ISO 11890-2:2020/A1:2024
(WI=00139779) Paints and varnishes - Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method - Amendment 1 (ISO 11890-2:2020/Amd 1:2024) |
2024-07-03 |
|
|
EN ISO 11908:1998
(WI=00139115) Binders for paints and varnishes - Amino resins - General methods of test (ISO 11908:1996) |
1998-04-22 |
|
|
EN ISO 11909:2007
(WI=00139327) Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007) |
2007-02-21 |
|
|
EN ISO 11997-1:2017
(WI=00139504) Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid (ISO 11997-1:2017) |
2017-09-27 |
|
|
EN ISO 11997-2:2013
(WI=00139420) Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013) |
2013-09-04 |
|
|
EN ISO 11997-3:2023
(WI=00139786) Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 3: Testing of coating systems on materials and components in automotive construction (ISO 11997-3:2022) |
2023-10-25 |
|
|
EN ISO 11998:2006
(WI=00139220) Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings (ISO 11998:2006) |
2006-07-15 |
|
|
EN ISO 12137:2011
(WI=00139344) Paints and varnishes - Determination of mar resistance (ISO 12137:2011) |
2011-10-15 |
|
|
EN ISO 12944-1:2017
(WI=00139495) Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction (ISO 12944-1:2017) |
2017-12-20 |
|
|
EN ISO 12944-2:2017
(WI=00139496) Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments (ISO 12944-2:2017) |
2017-12-20 |
|
|
EN ISO 12944-3:2017
(WI=00139497) Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations (ISO 12944-3:2017) |
2017-12-20 |
|
|
EN ISO 12944-4:2017
(WI=00139498) Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 4: Types of surface and surface preparation (ISO 12944-4:2017) |
2017-12-20 |
|
|
EN ISO 12944-5:2019
(WI=00139666) Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2019) |
2019-10-23 |
|
|
EN ISO 12944-6:2018
(WI=00139544) Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:2018) |
2018-02-14 |
|
|
EN ISO 12944-7:2017
(WI=00139499) Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7: Execution and supervision of paint work (ISO 12944-7:2017) |
2017-12-20 |
|
|
EN ISO 12944-8:2017
(WI=00139500) Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance (ISO 12944-8:2017) |
2017-12-20 |
|
|
EN ISO 12944-9:2018
(WI=00139574) Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018) |
2018-02-14 |
|
|
EN ISO 13076:2019
(WI=00139640) Paints and varnishes - Lighting and procedure for visual assessments of coatings (ISO 13076:2019) |
2019-10-30 |
|
|
EN ISO 13129:2012
(WI=00139433) Paints and varnishes - Electrochemical measurement of the protection provided to steel by paint coatings - Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements (ISO 13129:2012) |
2012-12-19 |
|
|
EN ISO 13632:2012
(WI=00139438) Binders for paints and varnishes - Rosin - Sampling and sample preparation for colour measurement (ISO 13632:2012) |
2012-07-01 |
|
|
EN ISO 13803:2014
(WI=00139417) Paints and varnishes - Determination of haze on paint films at 20° (ISO 13803:2014) |
2014-10-15 |
|
|
EN ISO 13885-1:2021
(WI=00139727) Gel permeation chromatography (GPC) - Part 1: Tetrahydrofuran (THF) as eluent (ISO 13885-1:2020) |
2021-09-01 |
|
|
EN ISO 13885-2:2021
(WI=00139728) Gel permeation chromatography (GPC) - Part 2: N,N-Dimenthylacetamide (DMAC) as eluent (ISO 13885-2:2020) |
2021-09-01 |
|
|
EN ISO 13885-3:2021
(WI=00139729) Gel permeation chromatography (GPC) - Part 3: Water as eluent (ISO 13885-3:2020) |
2021-09-01 |
|
|
EN ISO 14446:2010
(WI=00139404) Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999) |
2010-11-10 |
|
|
EN ISO 14680-1:2006
(WI=00139282) Paints and varnishes - Determination of pigment content - Part 1: Centrifuge method (ISO 14680-1:2000) |
2006-02-08 |
|
|
EN ISO 14680-2:2006
(WI=00139283) Paints and varnishes - Determination of pigment content - Part 2: Ashing method (ISO 14680-2:2000) |
2006-02-08 |
|
|
EN ISO 14680-3:2006
(WI=00139284) Paints and varnishes - Determination of pigment content - Part 3: Filtration method (ISO 14680-3:2000) |
2006-02-08 |
|
|
EN ISO 15091:2020
(WI=00139672) Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2019) |
2020-01-29 |
|
|
EN ISO 150:2018
(WI=00139600) Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test (ISO 150:2018) |
2018-12-12 |
|
|
EN ISO 15110:2017
(WI=00139540) Paints and varnishes - Artificial weathering including acidic deposition (ISO 15110:2017) |
2017-09-13 |
|
|
EN ISO 1513:2010
(WI=00139346) Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010) |
2010-05-01 |
|
|
EN ISO 1514:2024
(WI=00139770) Paints and varnishes - Standard panels for testing (ISO 1514:2024) |
2024-07-17 |
|
|
EN ISO 1518-1:2023
(WI=00139743) Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method (ISO 1518-1:2023) |
2023-02-22 |
|
|
EN ISO 1518-2:2019
(WI=00139606) Paints and varnishes - Determination of scratch resistance - Part 2: Variable-loading method (ISO 1518-2:2019) |
2019-07-03 |
|
|
EN ISO 15181-1:2007
(WI=00139311) Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides (ISO 15181-1:2007) |
2007-06-01 |
|
|
EN ISO 15181-2:2007
(WI=00139312) Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate (ISO 15181-2:2007) |
2007-06-01 |
|
|
EN ISO 15181-3:2007
(WI=00139265) Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 3: Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract (ISO 15181-3:2007) |
2007-06-01 |
|
|
EN ISO 15181-4:2008
(WI=00139245) Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 4: Determination of pyridine-triphenylborane (PTPB) concentration in the extract and calculation of the release rate (ISO 15181-4:2008) |
2008-08-01 |
|
|
EN ISO 15181-5:2008
(WI=00139321) Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) in the extract (ISO 15181-5:2008) |
2008-05-15 |
|
|
EN ISO 15181-6:2014
(WI=00139488) Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 6: Determination of tralopyril release rate by quantitation of its degradation product in the extract (ISO 15181-6:2012) |
2014-06-04 |
|
|
EN ISO 15184:2020
(WI=00139641) Paints and varnishes - Determination of film hardness by pencil test (ISO 15184:2020) |
2020-01-29 |
|
|
EN ISO 1519:2011
(WI=00139341) Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
2011-01-15 |
|
|
EN ISO 1520:2006
(WI=00139304) Paints and varnishes - Cupping test (ISO 1520:2006) |
2006-11-15 |
|
|
EN ISO 1522:2022
(WI=00139750) Paints and varnishes - Pendulum damping test (ISO 1522:2022) |
2022-11-23 |
|
|
EN ISO 15234:2010
(WI=00139405) Paints and varnishes - Testing of formaldehyde-emitting coatings and melamine foams - Determination of the steady-state concentration of formaldehyde in a small test chamber (ISO 15234:1999) |
2010-11-10 |
|
|
EN ISO 1524:2020
(WI=00139637) Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2020) |
2020-07-15 |
|
|
EN ISO 15528:2020
(WI=00139667) Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2020) |
2020-09-30 |
|
|
EN ISO 15710:2006
(WI=00139279) Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution (ISO 15710:2002) |
2006-06-21 |
|
|
EN ISO 15711:2004
(WI=00139238) Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water (ISO 15711:2003) |
2004-12-22 |
|
|
EN ISO 15715:2006
(WI=00139289) Binders for paints and varnishes - Determination of turbidity (ISO 15715:2003) |
2006-02-08 |
|
|
EN ISO 15741:2021
(WI=00139677) Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases (ISO 15741:2016) |
2021-02-10 |
|
|
EN ISO 15880:2004
(WI=00139239) Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders (ISO 15880:2000) |
2004-05-26 |
|
|
EN ISO 16014-5:2019
(WI=00139619) Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019) |
2019-06-12 |
|
|
EN ISO 16276-1:2007
(WI=00139215) Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pull-off testing (ISO 16276-1:2007) |
2007-05-15 |
|
|
EN ISO 16276-2:2007
(WI=00139216) Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing (ISO 16276-2:2007) |
2007-05-15 |
|
|
EN ISO 16474-1:2013
(WI=00139439) Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 16474-1:2013) |
2013-11-20 |
|
|
EN ISO 16474-2:2013
(WI=00139424) Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 16474-2:2013) |
2013-11-20 |
|
|
EN ISO 16474-2:2013/A1:2022
(WI=00139736) Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps - Amendment 1: Classification of daylight filters (ISO 16474-2:2013/Amd 1:2022) |
2022-09-14 |
|
|
EN ISO 16474-3:2021
(WI=00139632) Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2021) |
2021-01-20 |
|
|
EN ISO 16482-1:2016
(WI=00139572) Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 1: Oven method (ISO 16482-1:2013) |
2016-04-27 |
|
|
EN ISO 16482-2:2016
(WI=00139571) Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 2: Microwave method (ISO 16482-2:2013) |
2016-04-27 |
|
|
EN ISO 16773-1:2016
(WI=00139492) Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 1: Terms and definitions (ISO 16773-1:2016) |
2016-04-13 |
|
|
EN ISO 16773-2:2016
(WI=00139493) Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 2: Collection of data (ISO 16773-2:2016) |
2016-04-13 |
|
|
EN ISO 16773-3:2016
(WI=00139477) Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 3: Processing and analysis of data from dummy cells (ISO 16773-3:2016) |
2016-04-13 |
|
|
EN ISO 16773-4:2017
(WI=00139478) Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 4: Examples of spectra of polymer-coated and uncoated specimens (ISO 16773-4:2017) |
2017-04-12 |
|
|
EN ISO 16805:2005
(WI=00139242) Binders for paints and varnishes - Determination of glass transition temperature (ISO 16805:2003) |
2005-05-04 |
|
|
EN ISO 16862:2006
(WI=00139285) Paints and varnishes - Evaluation of sag resistance (ISO 16862:2003) |
2006-05-10 |
|
|
EN ISO 16925:2022
(WI=00139720) Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting (ISO 16925:2021) |
2022-03-16 |
|
|
EN ISO 16927:2014
(WI=00139472) Paints and varnishes - Determination of the overcoatability and recoatability of a coating (ISO 16927:2014) |
2014-01-15 |
|
|
EN ISO 17132:2007
(WI=00139259) Paints and varnishes - T-bend test (ISO 17132:2007) |
2007-10-01 |
|
|
EN ISO 17463:2022
(WI=00139717) Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO 17463:2022) |
2022-01-26 |
|
|
EN ISO 17872:2019
(WI=00139590) Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing (ISO 17872:2019) |
2019-10-02 |
|
|
EN ISO 17895:2024
(WI=00139737) Paints and varnishes - Determination of volatile organic compound (VOC) - Gas-chromatographic method with headspace injection for VOC determination (ISO 17895:2024) |
2024-08-28 |
|
|
EN ISO 19334:2011
(WI=00139426) Binders for paints and varnishes - Gum rosin - Gas-chromatographic analysis (ISO 19334:2010) |
2011-04-20 |
|
|
EN ISO 19396-1:2020
(WI=00139651) Paints and varnishes - Determination of pH value - Part 1: pH electrodes with glass membrane (ISO 19396-1:2017) |
2020-02-12 |
|
|
EN ISO 19396-2:2020
(WI=00139650) Paints and varnishes - Determination of pH value - Part 2: pH electrodes with ISFET technology (ISO 19396-2:2017) |
2020-02-12 |
|
|
EN ISO 19399:2017
(WI=00139595) Paints and varnishes - Wedge-cut method for determination of film thickness (scribe and drill method) (ISO 19399:2016) |
2017-12-06 |
|
|
EN ISO 19403-1:2022
(WI=00139718) Paints and varnishes - Wettability - Part 1: Vocabulary and general principles (ISO 19403-1:2022) |
2022-06-22 |
|
|
EN ISO 19403-2:2024
(WI=00139807) Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle (ISO 19403-2:2024) |
2024-09-11 |
|
|
EN ISO 19403-3:2024
(WI=00139808) Paints and varnishes - Wettability - Part 3: Determination of the surface tension of liquids using the pendant drop method (ISO 19403-3:2024) |
2024-09-11 |
|
|
EN ISO 19403-4:2020
(WI=00139647) Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension (ISO 19403-4:2017) |
2020-02-12 |
|
|
EN ISO 19403-5:2020
(WI=00139648) Paints and varnishes - Wettability - Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy (ISO 19403-5:2017) |
2020-02-12 |
|
|
EN ISO 19403-6:2020
(WI=00139645) Paints and varnishes - Wettability - Part 6: Measurement of dynamic contact angle (ISO 19403-6:2017) |
2020-02-12 |
|
|
EN ISO 19403-7:2020
(WI=00139649) Paints and varnishes - Wettability - Part 7: Measurement of the contact angle on a tilt stage (roll-off angle) (ISO 19403-7:2017) |
2020-02-12 |
|
|
EN ISO 20266:2020
(WI=00139695) Paints and varnishes - Determination of image clarity (degree of sharpness of reflected or transmitted image) (ISO 20266:2018) |
2020-12-09 |
|
|
EN ISO 20566:2021
(WI=00139642) Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2020) |
2021-02-24 |
|
|
EN ISO 20567-1:2017
(WI=00139505) Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing (ISO 20567-1:2017) |
2017-02-08 |
|
|
EN ISO 20567-2:2023
(WI=00139772) Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2023) |
2023-07-05 |
|
|
EN ISO 20567-3:2012
(WI=00139431) Paints and varnishes - Determination of stone-chip resistance of coatings - Part 3: Single-impact test with a free-flying impact body (ISO 20567-3:2012) |
2012-12-19 |
|
|
EN ISO 20567-4:2024
(WI=00139811) Paints and varnishes - Determination of stone-chip resistance of coatings - Part 4: Mobile multi-impact testing on a small testing area (ISO 20567-4:2023) |
2024-01-31 |
|
|
EN ISO 21227-1:2003
(WI=00139212) Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 1: General guidance (ISO 21227-1:2003) |
2003-08-01 |
|
|
EN ISO 21227-2:2006
(WI=00139213) Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 2: Evaluation procedure for multi-impact stone-chipping test (ISO 21227-2:2006) |
2006-09-01 |
|
|
EN ISO 21227-3:2007
(WI=00139214) Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3: Evaluation of delamination and corrosion around a scribe (ISO 21227-3:2007) |
2007-04-01 |
|
|
EN ISO 21227-4:2008
(WI=00139323) Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 4: Evaluation of filiform corrosion (ISO 21227-4:2008) |
2008-03-15 |
|
|
EN ISO 21545:2020
(WI=00139694) Paints and varnishes - Determination of settling (ISO 21545:2018) |
2020-12-02 |
|
|
EN ISO 21546:2020
(WI=00139699) Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019) |
2020-12-09 |
|
|
EN ISO 22516:2020
(WI=00139709) Paints and varnishes - Practical determination of non-volatile and volatile matter content during application (ISO 22516:2019) |
2020-12-09 |
|
|
EN ISO 22518:2020
(WI=00139696) Paints and varnishes - Determination of solvents in water-thinnable coating materials - Gas-chromatographic method (ISO 22518:2019) |
2020-12-09 |
|
|
EN ISO 22553-10:2023
(WI=00139776) Paints and varnishes - Electro-deposition coatings - Part 10: Edge protection (ISO 22553-10:2022) |
2023-01-25 |
|
|
EN ISO 22553-11:2021
(WI=00139731) Paints and varnishes - Electro-deposition coatings - Part 11: Bath stability (ISO 22553-11:2020) |
2021-09-01 |
|
|
EN ISO 22553-12:2021
(WI=00139724) Paints and varnishes - Electro-deposition coatings - Part 12: Sedimentation on horizontal areas (ISO 22553-12:2020) |
2021-09-01 |
|
|
EN ISO 22553-13:2021
(WI=00139735) Paints and varnishes - Electro-deposition coatings - Part 13: Determination of re-solving behaviour (ISO 22553-13:2021, Corrected version 2021-11) |
2021-11-10 |
|
|
EN ISO 22553-14:2021
(WI=00139734) Paints and varnishes - Electro-deposition coatings - Part 14: Deposition behaviour (ISO 22553-14:2021) |
2021-11-10 |
|
|
EN ISO 22553-15:2023
(WI=00139784) Paints and varnishes - Electro-deposition coatings - Part 15: Permeate residues (ISO 22553-15:2022) |
2023-08-30 |
|
|
EN ISO 22553-16:2023
(WI=00139783) Paints and varnishes - Electro-deposition coatings - Part 16: Pigment-binder ratio (ISO 22553-16:2022) |
2023-08-30 |
|
|
EN ISO 22553-1:2020
(WI=00139707) Paints and varnishes - Electro-deposition coatings - Part 1: Vocabulary (ISO 22553-1:2019) |
2020-12-02 |
|
|
EN ISO 22553-2:2020
(WI=00139704) Paints and varnishes - Electro-deposition coatings - Part 2: Throwing power (ISO 22553-2:2019) |
2020-12-02 |
|
|
EN ISO 22553-3:2020
(WI=00139700) Paints and varnishes - Electro-deposition coatings - Part 3: Compatibility of electro-deposition coating materials with a reference oil (ISO 22553-3:2019) |
2020-12-02 |
|
|
EN ISO 22553-4:2020
(WI=00139702) Paints and varnishes - Electro-deposition coatings - Part 4: Compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials (ISO 22553-4:2019) |
2020-12-02 |
|
|
EN ISO 22553-5:2020
(WI=00139703) Paints and varnishes - Electro-deposition coatings - Part 5: Determination of sieve residue (ISO 22553-5:2019) |
2020-12-02 |
|
|
EN ISO 22553-6:2020
(WI=00139698) Paints and varnishes - Electro-deposition coatings - Part 6: Entry marks (ISO 22553-6:2019) |
2020-12-02 |
|
|
EN ISO 22553-7:2021
(WI=00139725) Paints and varnishes - Electro-deposition coatings - Part 7: Electrical wet-film resistance (ISO 22553-7:2020) |
2021-09-01 |
|
|
EN ISO 22553-8:2021
(WI=00139730) Paints and varnishes - Electro-deposition coatings - Part 8: Electric charge density (ISO 22553-8:2020) |
2021-09-01 |
|
|
EN ISO 22553-9:2021
(WI=00139726) Paints and varnishes - Electro-deposition coatings - Part 9: Stoving loss (ISO 22553-9:2020) |
2021-09-01 |
|
|
EN ISO 22557:2020
(WI=00139708) Paints and varnishes - Scratch test using a spring-loaded pen (ISO 22557:2019) |
2020-12-09 |
|
|
EN ISO 22969:2020
(WI=00139697) Paints and varnishes - Determination of solar reflectance (ISO 22969:2019) |
2020-12-23 |
|
|
EN ISO 22970:2020
(WI=00139705) Paints and varnishes - Test method for evaluation of adhesion of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by condensation test or cataplasm storage (ISO 22970:2019) |
2020-12-02 |
|
|
EN ISO 23168:2020
(WI=00139706) Paints and varnishes - Determination of water content - Gas-chromatographic method (ISO 23168:2019) |
2020-12-02 |
|
|
EN ISO 23321:2020
(WI=00139701) Solvents for paints and varnishes - Demineralized water for industrial applications - Specification and test methods (ISO 23321:2019) |
2020-12-09 |
|
|
EN ISO 23322:2021
(WI=00139738) Paints and varnishes - Determination of solvents in coating materials containing organic solvents only - Gas-chromatographic method (ISO 23322:2021) |
2021-12-15 |
|
|
EN ISO 2409:2020
(WI=00139638) Paints and varnishes - Cross-cut test (ISO 2409:2020) |
2020-09-23 |
|
|
EN ISO 2431:2019
(WI=00139607) Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2019, Corrected version 2019-09) |
2019-07-10 |
|
|
EN ISO 276:2021
(WI=00139643) Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test (ISO 276:2019) |
2021-05-19 |
|
|
EN ISO 277:2010
(WI=00139401) Binders for paints and varnishes - Raw tung oil - Requirements and methods of test (ISO 277:2002) |
2010-11-10 |
|
|
EN ISO 2808:2019
(WI=00139584) Paints and varnishes - Determination of film thickness (ISO 2808:2019) |
2019-09-18 |
|
|
EN ISO 2810:2020
(WI=00139633) Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO 2810:2020) |
2020-09-30 |
|
|
EN ISO 2811-1:2023
(WI=00139742) Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2023) |
2023-02-08 |
|
|
EN ISO 2811-2:2011
(WI=00139349) Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011) |
2011-03-01 |
|
|
EN ISO 2811-3:2023
(WI=00139767) Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2023) |
2023-11-08 |
|
|
EN ISO 2811-4:2011
(WI=00139351) Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011) |
2011-03-01 |
|
|
EN ISO 2812-1:2017
(WI=00139585) Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2017) |
2017-12-13 |
|
|
EN ISO 2812-2:2018
(WI=00139586) Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2:2018) |
2018-12-12 |
|
|
EN ISO 2812-3:2019
(WI=00139639) Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2019) |
2019-05-08 |
|
|
EN ISO 2812-4:2017
(WI=00139587) Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods (ISO 2812-4:2017) |
2017-12-13 |
|
|
EN ISO 2812-5:2018
(WI=00139588) Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method (ISO 2812-5:2018) |
2018-09-12 |
|
|
EN ISO 2813:2014
(WI=00139419) Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014) |
2014-10-15 |
|
|
EN ISO 2815:2003
(WI=00139183) Paints and varnishes - Buchholz indentation test (ISO 2815:2003) |
2003-04-01 |
|
|
EN ISO 28199-1:2021
(WI=00139634) Paints and varnishes - Evaluation of properties of coating systems related to the spray application process - Part 1: Vocabulary and preparation of test panels (ISO 28199-1:2021) |
2021-04-14 |
|
|
EN ISO 28199-2:2021
(WI=00139635) Paints and varnishes - Evaluation of properties of coating systems related to the spray application process - Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling (ISO 28199-2:2021) |
2021-06-30 |
|
|
EN ISO 28199-3:2021
(WI=00139636) Paints and varnishes - Evaluation of properties of coating systems related to the spray application process - Part 3: Assessment of sagging, formation of bubbles, pinholing and hiding power (ISO 28199-3:2021) |
2021-06-30 |
|
|
EN ISO 2884-1:2024
(WI=00139768) Paints and varnishes - Determination of viscosity using rotational viscometers - Part 1: Absolute viscosity measurement with cone-plate measuring geometry at high shear rates (ISO 2884-1:2024) |
2024-09-18 |
|
|
EN ISO 2884-2:2024
(WI=00139769) Paints and varnishes - Determination of viscosity using rotational viscometers - Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds (ISO 2884-2:2024) |
2024-07-24 |
|
|
EN ISO 29601:2011
(WI=00139412) Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) |
2011-04-15 |
|
|
EN ISO 3219-1:2021
(WI=00139670) Rheology - Part 1: Vocabulary and symbols for rotational and oscillatory rheometry (ISO 3219-1:2021) |
2021-05-26 |
|
|
EN ISO 3219-2:2021
(WI=00139671) Rheology - Part 2: General principles of rotational and oscillatory rheometry (ISO 3219-2:2021) |
2021-05-26 |
|
|
EN ISO 3233-1:2019
(WI=00139659) Paints and varnishes - Determination of percentage volume of non-volatile matter - Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry-film density by the Archimedes principle (ISO 3233-1:2019) |
2019-12-04 |
|
|
EN ISO 3233-2:2019
(WI=00139608) Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle (ISO 3233-2:2019) |
2019-10-02 |
|
|
EN ISO 3233-3:2015
(WI=00139479) Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material (ISO 3233-3:2015) |
2015-05-27 |
|
|
EN ISO 3248:2016
(WI=00139494) Paints and varnishes - Determination of the effect of heat (ISO 3248:2016) |
2016-08-17 |
|
|
EN ISO 3251:2019
(WI=00139603) Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2019) |
2019-06-12 |
|
|
EN ISO 3668:2020
(WI=00139646) Paints and varnishes - Visual comparison of colour of paints (ISO 3668:2017) |
2020-02-12 |
|
|
EN ISO 3681:2018
(WI=00139604) Binders for paints and varnishes - Determination of saponification value - Titrimetric method (ISO 3681:2018) |
2018-12-12 |
|
|
EN ISO 4618:2023
(WI=00139714) Paints and varnishes - Vocabulary (ISO 4618:2023) |
2023-02-22 |
|
|
EN ISO 4619:2018
(WI=00139575) Driers for paints and varnishes (ISO 4619:2018) |
2018-12-12 |
|
|
EN ISO 4623-1:2018
(WI=00139589) Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrates (ISO 4623-1:2018) |
2018-11-14 |
|
|
EN ISO 4623-2:2016
(WI=00139501) Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2016) |
2016-08-24 |
|
|
EN ISO 4624:2023
(WI=00139751) Paints and varnishes - Pull-off test for adhesion (ISO 4624:2023) |
2023-06-21 |
|
|
EN ISO 4625-1:2020
(WI=00139644) Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2020) |
2020-08-19 |
|
|
EN ISO 4625-2:2006
(WI=00139288) Binders for paints and varnishes - Determination of softening point - Part 2: Cup-and-ball method (ISO 4625-2:2004) |
2006-02-08 |
|
|
EN ISO 4628-10:2024
(WI=00139746) Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion (ISO 4628-10:2024) |
2024-03-27 |
|
|
EN ISO 4628-1:2016
(WI=00139507) Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system (ISO 4628-1:2016) |
2016-02-10 |
|
|
EN ISO 4628-2:2016
(WI=00139514) Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
2016-02-10 |
|
|
EN ISO 4628-3:2016
(WI=00139515) Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016) |
2016-02-10 |
|
|
EN ISO 4628-4:2016
(WI=00139516) Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016) |
2016-02-10 |
|
|
EN ISO 4628-5:2022
(WI=00139745) Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2022) |
2022-11-23 |
|
|
EN ISO 4628-6:2023
(WI=00139771) Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628‑6:2023) |
2023-10-25 |
|
|
EN ISO 4628-7:2016
(WI=00139518) Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2016) |
2016-02-10 |
|
|
EN ISO 4628-8:2012
(WI=00139367) Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012) |
2012-11-01 |
|
|
EN ISO 4629-1:2016
(WI=00139541) Binders for paints and varnishes - Determination of hydroxyl value - Part 1: Titrimetric method without using a catalyst (ISO 4629-1:2016) |
2016-06-29 |
|
|
EN ISO 4629-2:2016
(WI=00139508) Binders for paints and varnishes - Determination of hydroxyl value - Part 2: Titrimetric method using a catalyst (ISO 4629-2:2016) |
2016-06-29 |
|
|
EN ISO 4629-3:2020
(WI=00139682) Binders for paints and varnishes - Determination of hydroxyl value - Part 3: Rapid test (ISO 4629-3:2018) |
2020-09-02 |
|
|
EN ISO 4630:2015
(WI=00139512) Clear liquids - Estimation of colour by the Gardner colour scale (ISO 4630:2015) |
2015-12-23 |
|
|
EN ISO 6270-1:2018
(WI=00139502) Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation (single-sided exposure) (ISO 6270-1:2017) |
2018-01-31 |
|
|
EN ISO 6270-2:2018
(WI=00139503) Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir) (ISO 6270-2:2017) |
2018-01-31 |
|
|
EN ISO 6271:2015
(WI=00139513) Clear liquids - Estimation of colour by the platinum-cobalt colour scale (ISO 6271:2015) |
2015-12-23 |
|
|
EN ISO 6272-1:2011
(WI=00139368) Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011) |
2011-08-15 |
|
|
EN ISO 6272-2:2011
(WI=00139343) Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011) |
2011-08-15 |
|
|
EN ISO 6504-1:2019
(WI=00139581) Paints and varnishes - Determination of hiding power - Part 1: Kubelka-Munk method for white and light-coloured paints (ISO 6504-1:2019) |
2019-06-12 |
|
|
EN ISO 6504-3:2019
(WI=00139582) Paints and varnishes - Determination of hiding power - Part 3: Determination of hiding power of paints for masonry, concrete and interior use (ISO 6504-3:2019) |
2019-12-18 |
|
|
EN ISO 6744-1:2004
(WI=00139223) Binders for paints and varnishes - Alkyd resins - Part 1: General methods of test (ISO 6744-1:1999) |
2004-05-26 |
|
|
EN ISO 6744-2:2004
(WI=00139224) Binders for paints and varnishes - Alkyd resins - Part 2: Determination of phthalic anhydride content (ISO 6744-2:1999) |
2004-05-26 |
|
|
EN ISO 6744-3:2004
(WI=00139225) Binders for paints and varnishes - Alkyd resins - Part 3: Determination of unsaponifiable matter content (ISO 6744-3:1999) |
2004-05-26 |
|
|
EN ISO 6744-4:2004
(WI=00139226) Binders for paints and varnishes - Alkyd resins - Part 4: Determination of fatty acid content (ISO 6744-4:1999) |
2004-05-26 |
|
|
EN ISO 6860:2006
(WI=00139218) Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006) |
2006-03-15 |
|
|
EN ISO 6923:2024
(WI=00139812) Paints and varnishes - Determination of monomeric diisocyanate content in coating materials and similar products using high performance liquid chromatography with ultraviolet detection (HPLC-UV) (ISO 6923:2023) |
2024-06-12 |
|
|
EN ISO 7142:2023
(WI=00139741) Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:2023) |
2023-02-22 |
|
|
EN ISO 7143:2007
(WI=00139326) Binders for paints and varnishes - Methods of test for characterizing water-based binders (ISO 7143:2007) |
2007-02-21 |
|
|
EN ISO 7783:2018
(WI=00139583) Paints and varnishes - Determination of water-vapour transmission properties - Cup method (ISO 7783:2018) |
2018-11-07 |
|
|
EN ISO 7784-1:2023
(WI=00139747) Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen (ISO 7784-1:2023) |
2023-02-22 |
|
|
EN ISO 7784-2:2023
(WI=00139748) Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen (ISO 7784-2:2023) |
2023-02-22 |
|
|
EN ISO 7784-3:2022
(WI=00139749) Paints and varnishes - Determination of resistance to abrasion - Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen (ISO 7784-3:2022) |
2022-11-16 |
|
|
EN ISO 8130-10:2021
(WI=00139692) Coating powders - Part 10: Determination of deposition efficiency (ISO 8130-10:2021) |
2021-07-14 |
|
|
EN ISO 8130-11:2019
(WI=00139555) Coating powders - Part 11: Inclined-plane flow test (ISO 8130-11:2019) |
2019-05-08 |
|
|
EN ISO 8130-12:2019
(WI=00139556) Coating powders - Part 12: Determination of compatibility (ISO 8130-12:2019) |
2019-05-08 |
|
|
EN ISO 8130-13:2019
(WI=00139557) Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2019) |
2019-05-08 |
|
|
EN ISO 8130-14:2019
(WI=00139558) Coating powders - Part 14: Vocabulary (ISO 8130-14:2019) |
2019-05-08 |
|
|
EN ISO 8130-15:2023
(WI=00139785) Coating powders - Part 15: Rheology (ISO 8130-15:2023) |
2023-11-01 |
|
|
EN ISO 8130-16:2023
(WI=00139782) Coating powders - Part 16: Determination of density by liquid displacement in a measuring cylinder (ISO 8130-16:2022) |
2023-08-30 |
|
|
EN ISO 8130-1:2019
(WI=00139545) Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:2019) |
2019-05-08 |
|
|
EN ISO 8130-2:2021
(WI=00139687) Coating powders - Part 2: Determination of density by gas comparison pycnometer (referee method) (ISO 8130-2:2021) |
2021-07-14 |
|
|
EN ISO 8130-3:2021
(WI=00139688) Coating powders - Part 3: Determination of density by liquid displacement pycnometer (ISO 8130-3:2021) |
2021-07-14 |
|
|
EN ISO 8130-4:2022
(WI=00139716) Coating powders - Part 4: Calculation of lower explosion limit (ISO 8130-4:2021) |
2022-03-16 |
|
|
EN ISO 8130-5:2021
(WI=00139689) Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:2021) |
2021-07-14 |
|
|
EN ISO 8130-6:2021
(WI=00139690) Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO 8130-6:2021) |
2021-07-14 |
|
|
EN ISO 8130-7:2019
(WI=00139551) Coating powders - Part 7: Determination of loss of mass on stoving (ISO 8130-7:2019) |
2019-05-08 |
|
|
EN ISO 8130-8:2021
(WI=00139691) Coating powders - Part 8: Assessment of the storage stability of thermosetting powders (ISO 8130-8:2021) |
2021-07-14 |
|
|
EN ISO 8501-1:2007
(WI=00139315) Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007) |
2007-05-01 |
|
|
EN ISO 8501-2:2001
(WI=00139199) Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: preparation grades of previously coated steel substrates after localized removal of previous coatings (ISO 8501-2:1994) |
2001-08-08 |
|
|
EN ISO 8501-3:2007
(WI=00139229) Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections (ISO 8501-3:2006) |
2007-07-25 |
|
|
EN ISO 8501-4:2020
(WI=00139609) Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with water jetting (ISO 8501-4:2020) |
2020-10-28 |
|
|
EN ISO 8502-11:2006
(WI=00139244) Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate (ISO 8502-11:2006) |
2006-04-01 |
|
|
EN ISO 8502-2:2017
(WI=00139445) Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2017) |
2017-02-08 |
|
|
EN ISO 8502-3:2017
(WI=00139446) Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:2017) |
2017-02-08 |
|
|
EN ISO 8502-4:2017
(WI=00139447) Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:2017) |
2017-02-08 |
|
|
EN ISO 8502-5:2004
(WI=00139230) Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) (ISO 8502-5:1998) |
2004-12-22 |
|
|
EN ISO 8502-6:2020
(WI=00139610) Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of water soluble contaminants for analysis (Bresle method)(ISO 8502-6:2020) |
2020-05-13 |
|
|
EN ISO 8502-9:2020
(WI=00139611) Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:2020) |
2020-09-09 |
|
|
EN ISO 8503-1:2012
(WI=00139359) Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces (ISO 8503-1:2012) |
2012-02-15 |
|
|
EN ISO 8503-2:2012
(WI=00139360) Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012) |
2012-02-15 |
|
|
EN ISO 8503-3:2012
(WI=00139361) Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Focusing microscope procedure (ISO 8503-3:2012) |
2012-02-15 |
|
|
EN ISO 8503-4:2012
(WI=00139362) Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure (ISO 8503-4:2012) |
2012-02-15 |
|
|
EN ISO 8503-5:2017
(WI=00139451) Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile (ISO 8503-5:2017) |
2017-03-15 |
|
|
EN ISO 8504-1:2019
(WI=00139596) Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2019) |
2019-11-27 |
|
|
EN ISO 8504-2:2019
(WI=00139597) Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2019) |
2019-11-27 |
|
|
EN ISO 8504-3:2018
(WI=00139520) Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO 8504-3:2018) |
2018-12-12 |
|
|
EN ISO 8623:2015
(WI=00139489) Tall-oil fatty acids for paints and varnishes - Test methods and characteristic values (ISO 8623:2015) |
2015-09-09 |
|
|
EN ISO 9038:2021
(WI=00139656) Determination of sustained combustibility of liquids (ISO 9038:2021) |
2021-05-19 |
|
|
EN ISO 9117-1:2009
(WI=00139324) Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009) |
2009-05-15 |
|
|
EN ISO 9117-2:2010
(WI=00139342) Paints and varnishes - Drying tests - Part 2: Pressure test for stackability (ISO 9117-2:2010) |
2010-03-01 |
|
|
EN ISO 9117-3:2010
(WI=00139363) Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini (ISO 9117-3:2010) |
2010-03-01 |
|
|
EN ISO 9117-4:2012
(WI=00139415) Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder (ISO 9117-4:2012) |
2012-08-15 |
|
|
EN ISO 9117-5:2012
(WI=00139414) Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012) |
2012-08-15 |
|
|
EN ISO 9117-6:2012
(WI=00139422) Paints and varnishes - Drying tests - Part 6: Print-free test (ISO 9117-6:2012) |
2012-07-18 |
|
|
EN ISO 9514:2019
(WI=00139665) Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2019) |
2019-06-26 |
|
|
EN ISO/CIE 11664-1:2019
(WI=00139612) Colorimetry - Part 1: CIE standard colorimetric observers (ISO/CIE 11664-1:2019) |
2019-07-17 |
|
|
EN ISO/CIE 11664-2:2022
(WI=00139660) Colorimetry - Part 2: CIE standard illuminants (ISO/CIE 11664-2:2022) |
2022-09-28 |
|
|
EN ISO/CIE 11664-3:2019
(WI=00139613) Colorimetry - Part 3: CIE tristimulus values (ISO/CIE 11664-3:2019) |
2019-07-17 |
|
|
EN ISO/CIE 11664-4:2019
(WI=00139614) Colorimetry - Part 4: CIE 1976 L*a*b* colour space (ISO/CIE 11664-4:2019) |
2019-07-17 |
|
|
EN ISO/CIE 11664-5:2024
(WI=00139781) Colorimetry - Part 5: CIE 1976 L*u*v* colour space and u', v' uniform chromaticity scale diagram (ISO/CIE 11664-5:2024) |
2024-06-19 |
|
|
EN ISO/CIE 11664-6:2022
(WI=00139732) Colorimetry - Part 6: CIEDE2000 colour-difference formula (ISO/CIE 11664-6:2022) |
2022-09-21 |
|