About CEN

The European Committee for Standardization is one of three European Standardization Organizations (together with CENELEC and ETSI) that have been officially recognized by the European Union and by the European Free Trade Association (EFTA) as being responsible for developing and defining voluntary standards at European level.

CEN Communities Technical Work Structure and Governance
CEN Technical Bodies CEN Standards Evolution and Forecast

CEN/TC 185

 - 

Fasteners
 
En FrDe
  •  
export to xls file

CEN/TC 185 Published Standards

Project reference, Title
sort up  
Publication date
sort up sort down
Sales Points
CEN ISO/TR 20491:2021 (WI=00185418)
Fasteners - Fundamentals of hydrogen embrittlement in steel fasteners (ISO/TR 20491:2019)		 2021-12-08
EN 14218:2003 (WI=00185172)
Hexagon nuts with flange - Fine pitch thread (ISO 10663:1999, modified)		 2003-04-16
EN 14219:2003 (WI=00185173)
Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified)		 2003-04-16
EN 14219:2003/AC:2007 (WI=00185C20)
Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified)		 2007-02-28
EN 14399-10:2018 (WI=00185311)
High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload		 2018-05-03
EN 14399-1:2015 (WI=00185317)
High-strength structural bolting assemblies for preloading - Part 1: General requirements		 2015-02-18
EN 14399-2:2015 (WI=00185304)
High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading		 2015-02-18
EN 14399-3:2015 (WI=00185305)
High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies		 2015-02-18
EN 14399-4:2015 (WI=00185306)
High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies		 2015-02-18
EN 14399-5:2015 (WI=00185307)
High-strength structural bolting assemblies for preloading - Part 5: Plain washers		 2015-02-18
EN 14399-6:2015 (WI=00185308)
High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers		 2015-02-18
EN 14399-7:2018 (WI=00185309)
High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies		 2018-07-25
EN 14399-8:2018 (WI=00185310)
High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies		 2018-07-25
EN 14399-9:2018 (WI=00185367)
High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies		 2018-05-03
EN 14831:2005 (WI=00185206)
Fasteners - Tightening performance - Torque/Angle simplified test method		 2005-04-13
EN 15048-1:2016 (WI=00185312)
Non-preloaded structural bolting assemblies - Part 1: General requirements		 2016-07-20
EN 15048-2:2016 (WI=00185345)
Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose		 2016-07-20
EN 1661:1997 (WI=00185135)
Hexagon nuts with flange (ISO/DIS 4161:1996, modified)		 1997-12-17
EN 1661:1997/AC:1998 (WI=00185C03)
Hexagon nuts with flange (ISO/DIS 4161:1996, modified)		 1998-12-16
EN 1662:1997 (WI=00185136)
Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified)		 1997-12-17
EN 1662:1997/AC:2007 (WI=00185C18)
Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified)		 2007-02-28
EN 1663:1997 (WI=00185137)
Prevailing torque type hexagon nuts with flange (with non-metallic insert) (ISO 7043:1997, modified)		 1997-12-17
EN 1664:1997 (WI=00185138)
Prevailing torque type all-metal hexagon nuts with flange (ISO 7044:1997, modified)		 1997-12-17
EN 1665:1997 (WI=00185139)
Hexagon bolts with flange - Heavy series		 1997-05-21
EN 1665:1997/AC:2007 (WI=00185C19)
Hexagon bolts with flange - Heavy series		 2007-02-28
EN 1666:1997 (WI=00185140)
Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread (ISO 12125:1997, modified)		 1997-12-17
EN 1667:1997 (WI=00185141)
Prevailing torque type all-metal hexagon nuts with flange metric fine pitch thread (ISO 12126:1997, modified)		 1997-12-17
EN 20273:1991 (WI=00185026)
Fasteners - Clearance holes for bolts and screws (ISO 273:1979)		 1991-10-16
EN 20898-7:1995 (WI=00185128)
Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992)		 1995-01-10
EN 22339:1992 (WI=00185038)
Taper pins, unhardened (ISO 2339:1986)		 1992-07-24
EN 22340:1992 (WI=00185039)
Clevis pins without head (ISO 2340:1986)		 1992-07-24
EN 22341:1992 (WI=00185040)
Clevis pins with head (ISO 2341:1986)		 1992-07-24
EN 26157-1:1991 (WI=00185005)
Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements (ISO 6157-1:1988)		 1991-10-16
EN 26157-3:1991 (WI=00185006)
Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements (ISO 6157-3:1988)		 1991-10-16
EN 27721:1991 (WI=00185028)
Countersunk head screws - Head configuration and gauging (ISO 7721:1983)		 1991-10-16
EN 28736:1992 (WI=00185044)
Taper pins with internal thread, unhardened (ISO 8736:1986)		 1992-07-24
EN 28737:1992 (WI=00185045)
Taper pins with external thread, unhardened (ISO 8737:1986)		 1992-07-24
EN 28738:1992 (WI=00185060)
Plain washers for clevis pins - Product grade A (ISO 8738:1986)		 1992-07-24
EN 28749:1992 (WI=00185056)
Pins and grooved pins - Shear test (ISO 8749:1986)		 1992-07-24
EN 28839:1991 (WI=00185007)
Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839:1986)		 1991-10-16
EN ISO 10484:2004 (WI=00185231)
Widening test on nuts (ISO 10484:1997)		 2004-07-21
EN ISO 10510:2011 (WI=00185296)
Tapping screw and washer assemblies with plain washers (ISO 10510:2011)		 2011-04-01
EN ISO 10511:2012 (WI=00185322)
Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012)		 2012-12-19
EN ISO 10512:2012 (WI=00185323)
Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:2012)		 2012-12-19
EN ISO 10513:2012 (WI=00185324)
Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:2012)		 2012-12-19
EN ISO 10642:2019 (WI=00185385)
Fasteners - Hexagon socket countersunk head screws with reduced loadability (ISO 10642:2019)		 2019-10-16
EN ISO 10644:2009 (WI=00185251)
Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:2009)		 2009-07-01
EN ISO 10664:2014 (WI=00185348)
Hexalobular internal driving feature for bolts and screws (ISO 10664:2014)		 2014-10-15
EN ISO 10666:1999 (WI=00185156)
Drilling screws with tapping screw thread - Mechanical and functional properties (ISO 10666:1999)		 1999-09-01
EN ISO 10673:2009 (WI=00185252)
Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:2009)		 2009-07-01
EN ISO 10683:2018 (WI=00185374)
Fasteners - Non-electrolytically applied zinc flake coating systems (ISO 10683:2018)		 2018-09-19
EN ISO 10684:2004 (WI=00185228)
Fasteners - Hot dip galvanized coatings (ISO 10684:2004)		 2004-07-15
EN ISO 10684:2004/AC:2009 (WI=00185C21)
Fasteners - Hot dip galvanized coatings (ISO 10684:2004/Cor 1:2008)		 2009-04-08
EN ISO 1207:2011 (WI=00185264)
Slotted cheese head screws - Product grade A (ISO 1207:2011)		 2011-08-01
EN ISO 1234:1997 (WI=00185108)
Split pins (ISO 1234:1997)		 1997-11-01
EN ISO 12474:2010 (WI=00185257)
Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)		 2010-10-01
EN ISO 13337:2009 (WI=00185243)
Spring-type straight pins - Slotted, light duty (ISO 13337:2009)		 2009-06-15
EN ISO 14579:2011 (WI=00185289)
Hexalobular socket head cap screws (ISO 14579:2011)		 2011-03-15
EN ISO 14580:2011 (WI=00185290)
Hexalobular socket cheese head screws (ISO 14580:2011)		 2011-03-15
EN ISO 14581:2023 (WI=00185405)
Fasteners - Hexalobular socket countersunk flat head screws (common head style) with reduced loadability (ISO 14581:2022)		 2023-01-11
EN ISO 14582:2013 (WI=00185314)
Fasteners - Hexalobular socket countersunk head screws, high head (ISO 14582:2013)		 2013-09-18
EN ISO 14583:2011 (WI=00185291)
Hexalobular socket pan head screws (ISO 14583:2011)		 2011-03-15
EN ISO 14584:2011 (WI=00185292)
Hexalobular socket raised countersunk head screws (ISO 14584:2011)		 2011-03-15
EN ISO 14585:2011 (WI=00185293)
Hexalobular socket pan head tapping screws (ISO 14585:2011)		 2011-02-15
EN ISO 14586:2011 (WI=00185294)
Hexalobular socket countersunk head tapping screws (ISO 14586:2011)		 2011-02-15
EN ISO 14587:2011 (WI=00185295)
Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011)		 2011-02-15
EN ISO 14588:2000 (WI=00185163)
Blind rivets - Terminology and definitions (ISO 14588:2000)		 2000-12-15
EN ISO 14589:2000 (WI=00185164)
Blind rivets - Mechanical testing (ISO 14589:2000)		 2000-12-15
EN ISO 1478:1999 (WI=00185174)
Tapping screws thread (ISO 1478:1999)		 1999-08-01
EN ISO 1479:2011 (WI=00185265)
Hexagon head tapping screws (ISO 1479:2011)		 2011-08-01
EN ISO 1481:2011 (WI=00185266)
Slotted pan head tapping screws (ISO 1481:2011)		 2011-08-01
EN ISO 1482:2011 (WI=00185267)
Slotted countersunk (flat) head tapping screws (ISO 1482:2011)		 2011-08-01
EN ISO 1483:2011 (WI=00185268)
Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011)		 2011-08-01
EN ISO 15065:2005 (WI=00185229)
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005)		 2005-02-15
EN ISO 15330:1999 (WI=00185162)
Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method (ISO 15330:1999)		 1999-09-01
EN ISO 15480:2019 (WI=00185389)
Fasteners - Hexagon washer head drilling screws with tapping screw thread (ISO 15480:2019)		 2019-07-10
EN ISO 15481:1999 (WI=00185158)
Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999)		 1999-08-01
EN ISO 15482:1999 (WI=00185159)
Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999)		 1999-08-01
EN ISO 15483:1999 (WI=00185160)
Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999)		 1999-08-01
EN ISO 1580:2011 (WI=00185297)
Slotted pan head screws - Product grade A (ISO 1580:2011)		 2011-09-01
EN ISO 15973:2000 (WI=00185189)
Closed end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15973:2000)		 2000-12-15
EN ISO 15974:2000 (WI=00185190)
Closed end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15974:2000)		 2000-12-15
EN ISO 15975:2002 (WI=00185191)
Closed end blind rivets with break pull mandrel and protrudiing head - AI/AIA (ISO 15975:2002)		 2002-11-01
EN ISO 15976:2002 (WI=00185192)
Closed end blind rivets with break pull mandrel and protrudiing head - St/St (ISO 15976:2002)		 2002-11-01
EN ISO 15977:2002 (WI=00185193)
Open end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15977:2002)		 2002-11-01
EN ISO 15978:2002 (WI=00185194)
Open end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15978:2002)		 2002-11-01
EN ISO 15979:2002 (WI=00185195)
Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002)		 2002-11-01
EN ISO 15980:2002 (WI=00185196)
Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002)		 2002-11-01
EN ISO 15981:2002 (WI=00185197)
Open end blind rivets with break pull mandrel and protruding head - AIA/AIA (ISO 15981:2002)		 2002-11-01
EN ISO 15982:2002 (WI=00185198)
Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA (ISO 15982:2002)		 2002-11-01
EN ISO 15983:2002 (WI=00185199)
Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002)		 2002-11-01
EN ISO 15984:2002 (WI=00185200)
Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002)		 2002-11-01
EN ISO 16047:2005 (WI=00185212)
Fasteners - Torque/clamp force testing (ISO 16047:2005)		 2005-02-01
EN ISO 16047:2005/A1:2012 (WI=00185325)
Fasteners - Torque/clamp force testing (ISO 16047:2005/Amd 1:2012)		 2012-09-15
EN ISO 16048:2003 (WI=00185213)
Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003)		 2003-02-01
EN ISO 16228:2018 (WI=00185368)
Fasteners - Types of inspection documents (ISO 16228:2017)		 2018-02-07
EN ISO 16426:2002 (WI=00185211)
Fasteners - Quality assurance system (ISO 16426:2002)		 2002-11-15
EN ISO 16582:2002 (WI=00185202)
Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002)		 2002-11-01
EN ISO 16583:2002 (WI=00185203)
Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002)		 2002-11-01
EN ISO 16584:2002 (WI=00185204)
Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt (ISO 16584:2002)		 2002-11-01
EN ISO 16585:2002 (WI=00185205)
Closed end blind rivets Closed end blind rivets with pull mandrel and protruding head - A2/SSt (ISO 16585:2002)with pull mandrel and protruding head - A2/SSt (ISO 16585:2002)		 2002-11-01
EN ISO 1891-2:2014 (WI=00185318)
Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings (ISO 1891-2:2014)		 2014-10-15
EN ISO 1891-2:2014/A1:2021 (WI=00185410)
Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings - Amendment 1 (ISO 1891-2:2014/Amd 1:2020)		 2021-06-23
EN ISO 1891-4:2018 (WI=00185346)
Fasteners - Vocabulary - Part 4: Control, inspection, delivery, acceptance and quality (ISO 1891-4:2018)		 2018-06-20
EN ISO 2009:2011 (WI=00185298)
Slotted countersunk flat head screws - Product grade A (ISO 2009:2011)		 2011-09-01
EN ISO 2010:2011 (WI=00185299)
Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)		 2011-09-01
EN ISO 21670:2014 (WI=00185343)
Fasteners - Hexagon weld nuts with flange (ISO 21670:2014)		 2014-05-21
EN ISO 225:2010 (WI=00185260)
Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions (ISO 225:2010)		 2010-10-01
EN ISO 2320:2015 (WI=00185350)
Fasteners - Prevailing torque steel nuts - Functional properties (ISO 2320:2015)		 2015-12-23
EN ISO 2338:1997 (WI=00185109)
Parallel pins, of unhardened steel and austenitic stainless steel (ISO 2338:1997)		 1997-11-01
EN ISO 23429:2004 (WI=00185227)
Gauging of hexagon sockets (ISO 23429:2004)		 2004-01-15
EN ISO 2342:2003 (WI=00185225)
Slotted headless screws with shank (ISO 2342:2003)		 2003-12-01
EN ISO 2702:2022 (WI=00185411)
Fasteners - Heat treated tapping screws - Mechanical and physical properties (ISO 2702:2022)		 2022-12-21
EN ISO 3269:2019 (WI=00185344)
Fasteners - Acceptance inspection (ISO 3269:2019)		 2019-09-18
EN ISO 3506-1:2020 (WI=00185371)
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes (ISO 3506-1:2020)		 2020-04-15
EN ISO 3506-2:2020 (WI=00185372)
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified grades and property classes (ISO 3506-2:2020)		 2020-04-22
EN ISO 3506-3:2009 (WI=00185255)
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)		 2009-11-15
EN ISO 3506-4:2009 (WI=00185256)
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009)		 2009-11-15
EN ISO 3506-5:2023 (WI=00185434)
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 5: Special fasteners (also including fasteners from nickel alloys) for high temperature applications (ISO 3506-5:2022)		 2023-11-01
EN ISO 3506-6:2022 (WI=00185419)
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners (ISO 3506-6:2020)		 2022-06-22
EN ISO 4014:2022 (WI=00185378)
Fasteners - Hexagon head bolts - Product grades A and B (ISO 4014:2022)		 2022-07-20
EN ISO 4015:2022 (WI=00185379)
Fasteners - Hexagon head bolts with reduced shank (shank diameter ≈ pitch diameter) - Product grade B (ISO 4015:2022)		 2022-07-20
EN ISO 4016:2022 (WI=00185380)
Fasteners - Hexagon head bolts - Product grade C (ISO 4016:2022)		 2022-07-20
EN ISO 4017:2022 (WI=00185381)
Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2022)		 2022-07-20
EN ISO 4018:2022 (WI=00185382)
Fasteners - Hexagon head screws - Product grade C (ISO 4018:2022)		 2022-07-20
EN ISO 4026:2003 (WI=00185131)
Hexagon socket set screws with flat point (ISO 4026:2003)		 2003-12-01
EN ISO 4027:2003 (WI=00185132)
Hexagon socket set screws with cone point (ISO 4027:2003)		 2003-12-01
EN ISO 4028:2003 (WI=00185133)
Hexagon socket set screws with dog point (ISO 4028:2003)		 2003-12-01
EN ISO 4029:2003 (WI=00185134)
Hexagon socket set screws with cup point (ISO 4029:2003)		 2003-12-01
EN ISO 4032:2023 (WI=00185412)
Fasteners - Hexagon regular nuts (style 1) (ISO 4032:2023)		 2023-08-30
EN ISO 4033:2023 (WI=00185413)
Fasteners - Hexagon high nuts (style 2) (ISO 4033:2023)		 2023-09-06
EN ISO 4034:2012 (WI=00185328)
Hexagon regular nuts (style 1) - Product grade C (ISO 4034:2012)		 2012-12-19
EN ISO 4035:2023 (WI=00185414)
Fasteners - Hexagon thin nuts (style 0) (ISO 4035:2023)		 2023-09-06
EN ISO 4042:2022 (WI=00185402)
Fasteners - Electroplated coating systems (ISO 4042:2022)		 2022-06-15
EN ISO 4753:2011 (WI=00185280)
Fasteners - Ends of parts with external ISO metric thread (ISO 4753:2011)		 2011-11-01
EN ISO 4757:1994 (WI=00185077)
Cross recesses for screws (ISO 4757:1983)		 1994-07-31
EN ISO 4759-1:2000 (WI=00185027)
Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C (ISO 4759-1:2000)		 2000-11-15
EN ISO 4759-3:2016 (WI=00185366)
Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016)		 2016-06-29
EN ISO 4762:2004 (WI=00185221)
Hexagon socket head cap screws (ISO 4762:2004, Corrected version 2024-08)		 2004-03-01
EN ISO 4766:2024 (WI=00185421)
Fasteners - Slotted set screws with flat point (ISO 4766:2024)		 2024-06-26
EN ISO 6157-2:2004 (WI=00185230)
Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995)		 2004-07-21
EN ISO 7040:2012 (WI=00185319)
Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012)		 2012-12-19
EN ISO 7042:2012 (WI=00185320)
Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12 (ISO 7042:2012)		 2012-12-19
EN ISO 7045:2011 (WI=00185300)
Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011)		 2011-09-01
EN ISO 7046-1:2011 (WI=00185301)
Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel screws of property class 4.8 (ISO 7046-1:2011)		 2011-09-01
EN ISO 7046-2:2011 (WI=00185302)
Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011)		 2011-09-01
EN ISO 7047:2011 (WI=00185303)
Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011)		 2011-09-01
EN ISO 7048:2011 (WI=00185286)
Cross-recessed cheese head screws (ISO 7048:2011)		 2011-04-01
EN ISO 7049:2011 (WI=00185271)
Cross-recessed pan head tapping screws (ISO/FDIS 7049:2011)		 2011-08-01
EN ISO 7050:2011 (WI=00185272)
Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011)		 2011-08-01
EN ISO 7051:2011 (WI=00185273)
Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011)		 2011-08-01
EN ISO 7053:2019 (WI=00185388)
Fasteners - Hexagon washer head tapping screws (ISO 7053:2019)		 2019-07-10
EN ISO 7092:2000 (WI=00185101)
Plain washers - Small series - Product grade A (ISO 7092:2000)		 2000-06-01
EN ISO 7093-1:2000 (WI=00185102)
Plain washers - Large series - Part 1: Product grade A (ISO 7093-1:2000)		 2000-06-01
EN ISO 7093-2:2000 (WI=00185201)
Plain washers - Large series - Part 2: Product grade C (ISO 7093-2:2000)		 2000-06-01
EN ISO 7094:2000/AC:2002 (WI=00185C05)
Plain washers - Extra large series - Product grade C (ISO 7094:2000/Cor.1:2000)		 2002-07-24
EN ISO 7380-1:2023 (WI=00185406)
Fasteners - Button head screws with reduced loadability - Part 1: Hexagon socket button head screws (ISO 7380-1:2022)		 2023-01-11
EN ISO 7380-2:2023 (WI=00185407)
Fasteners - Button head screws with reduced loadability - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2022)		 2023-01-11
EN ISO 7434:2024 (WI=00185422)
Fasteners - Slotted set screws with cone point (ISO 7434:2024)		 2024-06-26
EN ISO 7435:2024 (WI=00185423)
Fasteners - Slotted set screws with dog point (ISO 7435:2024)		 2024-06-26
EN ISO 7436:2024 (WI=00185424)
Fasteners - Slotted set screws with cup point (ISO 7436:2024)		 2024-06-26
EN ISO 7719:2012 (WI=00185321)
Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012)		 2012-12-19
EN ISO 7719:2012/AC:2013 (WI=00185C23)
Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 - Technical Corrigendum 1 (ISO 7719:2012/Cor 1:2013)		 2013-05-29
EN ISO 7721-2:1994 (WI=00185085)
Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990)		 1994-07-31
EN ISO 8673:2023 (WI=00185415)
Fasteners - Hexagon regular nuts (style 1), with fine pitch thread (ISO 8673:2023)		 2023-09-06
EN ISO 8674:2023 (WI=00185416)
Fasteners - Hexagon high nuts (style 2), with fine pitch thread (ISO 8674:2023)		 2023-09-06
EN ISO 8675:2023 (WI=00185417)
Fasteners - Hexagon thin nuts (style 0), with fine pitch thread (ISO 8675:2023)		 2023-09-06
EN ISO 8676:2022 (WI=00185383)
Fasteners - Hexagon head screws, with fine pitch thread - Product grades A and B (ISO 8676:2022)		 2022-07-20
EN ISO 8733:1997 (WI=00185110)
Parallel pins with internal thread, of unhardened steel or austenitic stainless steel (ISO 8733:1997)		 1997-11-15
EN ISO 8735:1997 (WI=00185112)
Parallel pins with internal thread, of hardened steel or martensitic stainless steel (ISO 8735:1997)		 1997-11-15
EN ISO 8739:1997 (WI=00185113)
Grooved pins - Full-length parallel grooved, with pilot (ISO 8739:1997)		 1997-11-01
EN ISO 8740:1997 (WI=00185114)
Grooved pins - Full-length parallel grooved, with chamfer (ISO 8740:1997)		 1997-11-01
EN ISO 8741:1997 (WI=00185115)
Grooved pins - Half-length reverse taper grooved (ISO 8741:1997)		 1997-11-01
EN ISO 8742:1997 (WI=00185116)
Grooved pins - One-third-length centre grooved (ISO 8742:1997)		 1997-11-01
EN ISO 8743:1997 (WI=00185117)
Grooved pins - Half-length centre grooved (ISO 8743:1997)		 1997-11-01
EN ISO 8744:1997 (WI=00185118)
Grooved pins - Full-length taper grooved (ISO 8744:1997)		 1997-11-01
EN ISO 8745:1997 (WI=00185119)
Grooved pins - Half-length taper grooved (ISO 8745:1997)		 1997-11-15
EN ISO 8746:1997 (WI=00185120)
Grooved pins with round head (ISO 8746:1997)		 1997-11-15
EN ISO 8747:1997 (WI=00185121)
Grooved pins with countersunk head (ISO 8747:1997)		 1997-11-15
EN ISO 8748:2007 (WI=00185239)
Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007)		 2007-04-15
EN ISO 8750:2007 (WI=00185240)
Spring-type straight pins - Coiled, standard duty (ISO 8750:2007)		 2007-04-15
EN ISO 8751:2007 (WI=00185241)
Spring-type straight pins - Coiled, light duty (ISO 8751:2007)		 2007-04-15
EN ISO 8752:2009 (WI=00185242)
Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009)		 2009-06-15
EN ISO 8765:2022 (WI=00185384)
Fasteners - Hexagon head bolts, with fine pitch thread - Product grades A and B (ISO 8765:2022)		 2022-07-20
EN ISO 887:2000 (WI=00185097)
Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000)		 2000-06-15
EN ISO 887:2000/AC:2006 (WI=00185C15)
Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000)		 2006-01-25
EN ISO 888:2018 (WI=00185387)
Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012)		 2018-06-27
EN ISO 898-1:2013 (WI=00185315)
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)		 2013-01-23
EN ISO 898-1:2013/AC:2013 (WI=00185C25)
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread - Technical Corrigendum 1 (ISO 898-1:2013/Cor 1:2013)		 2013-10-09
EN ISO 898-2:2022 (WI=00185408)
Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes (ISO 898-2:2022)		 2022-10-26
EN ISO 898-3:2018 (WI=00185376)
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes (ISO 898-3:2018)		 2018-06-27
EN ISO 898-3:2018/A1:2021 (WI=00185409)
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes - Amendment 1 (ISO 898-3:2018/Amd 1:2020)		 2021-05-19
EN ISO 898-5:2012 (WI=00185274)
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)		 2012-06-01
 

Our use of cookies

We use necessary cookies to make our site work.

Necessary cookies enable core functionality such as security, network management, and accessibility. You may disable these by changing your browser settings, but this may affect how the website functions.

  翻译：