About CEN
The European Committee for Standardization is one of three European Standardization Organizations (together with CENELEC and ETSI) that have been officially recognized by the European Union and by the European Free Trade Association (EFTA) as being responsible for developing and defining voluntary standards at European level.
- |
Project
| Reference | EN ISO 15741:2021 |
|---|---|
| Title | Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases (ISO 15741:2016) |
| Work Item Number | 00139677 |
| Abstract/Scope | This document specifies requirements and methods of test for liquid epoxy paints and internal coatings of such paints in steel pipes and fittings for the conveyance of non-corrosive gas. It also deals with the application of the paint. Other paints or paint systems are not excluded provided they comply with the requirements given in this document. The coating consists of one layer, which is normally shop-applied on blast-cleaned steel by airless spray or other suitable spraying techniques. The applied and cured paint film must be smooth to give the desired reduction in friction. Brush application is only used for small repair jobs. |
| Status |
Published
|
| Reference Document |
ISO 15741:2016 (EQV)
|
| date of Availability (DAV) | 2021-02-10 |
| ICS | 87.020 - Paint coating processes |
| A-Deviation(s) | |
| Special National Condition(s) |
Legal
| Directive(s) | |
|---|---|
| Mandate(s) | |
| Citation in OJEU |
Implementation Dates
| date of Ratification (DOR) (1) | 2021-01-18 |
|---|---|
| date of Availability (DAV) (2) | 2021-02-10 |
| date of Announcement (DOA) (3) | 2021-05-31 |
| date of Publication (DOP) (4) | 2021-08-31 |
| date of Withdrawal (DOW) (5) | 2021-08-31 |
Relations
| Supersedes | |
|---|---|
| Superseded by | |
| Normative reference (6) |
ISO 19840:2012
ISO 2409
ISO 2811 series ISO 2812-1:2007
ISO 2812-2
ISO 2815 ISO 3233-1 ISO 3251 ISO 6743-4 ISO 6860 ISO 8501-1 ISO 8503-1 ISO 8503-2 ISO 9227 |
| Bibliographic references (7) |
|
| Sales Points |
|
(1) Date of ratification (dor) date when the Technical Board notes the approval of an EN (and HD for CENELEC), from which time the standard may be said to be approved
(2) Date of availability (dav) date when the definitive text in the official language versions of an approved CEN/CENELEC publication is distributed by the Central Secretariat
(3) Date of announcement (doa) latest date by which the existence of an EN (and HD for CENELEC), a TS or a CWA has to be announced at national level
(4) Date of publication (dop) latest date by which an EN has to be implemented at national level by publication of an identical national standard or by endorsement
(5) Date of withdrawal (dow) latest date by which national standards conflicting with an EN (and HD for CENELEC) have to be withdrawn
(6) This list of normative references is purely indicative. The only official list of normative reference is the list of the published standard.
In the case of undated standard, a link to the last dated version is provided.
In the case of series, a link to each standard identified in the series is provided.
We also invite you to check (via the website) whether corrigenda and/or amendments shall be read in conjunction with the main standard.
(7) This list of bibliographic references, which is provided for homegrown standards only, is purely indicative and was retrieved automatically using available XML files. It is limited to publications that have been published in the XML format. For standards that are not homegrown, the corresponding international standard should be consulted.