About CEN
The European Committee for Standardization is one of three European Standardization Organizations (together with CENELEC and ETSI) that have been officially recognized by the European Union and by the European Free Trade Association (EFTA) as being responsible for developing and defining voluntary standards at European level.
- |
Project
| Reference | EN ISO 18497-3:2024 |
|---|---|
| Title | Agricultural machinery and tractors - Safety of partially automated, semi-autonomous and autonomous machinery - Part 3: Autonomous operating zones (ISO 18497-3:2024) |
| Work Item Number | 00144425 |
| Abstract/Scope | This document specifies principles for the design of agricultural machinery and tractors utilizing systems (perception, supervisory or other) to prevent unintended excursions beyond the boundary of the autonomous operating zone which are used in agricultural applications and that have partially automated, semi-autonomous and autonomous functions. Additionally, it provides guidance on the type of information to be provided by the manufacturer on safe working practices (including information about residual risks). The autonomous operating zone itself is not within the scope of this document. The autonomous operating zone can include, for example, considerations for the autonomous operating zone location, physical or virtual boundaries, physical boundary types (natural or man-made) and the associated risks with the systems (perception, supervisory or other) to prevent unintended excursions beyond the boundary of the autonomous operating zone design. The purpose of this document is to assist in the provision of more specific safety requirements, means of verification and information for use to ensure an appropriate level of safety for agricultural machinery and tractors with partially automated, semi-autonomous and autonomous functions used in a specified way. This document deals with the significant hazards relevant to agricultural machinery and tractors with partially automated, semi-autonomous and autonomous functions when used as intended and under the conditions of misuse reasonably foreseeable by the manufacturer during normal operation and service. Applicability of the design principles and any additional detailed requirements for design, verification, validation or information for use are outside the scope of this document. When risk assessment concludes that hazards are not significant hazards, the principles of this document do not apply. NOTE Safety requirements for specific non-automated functions of agricultural machinery and tractors can be available in machine-specific type-C standards. This document is not applicable to: — forestry applications; — operations on public roads including relevant requirements for braking and steering systems. This document is not applicable to agricultural machinery and tractors which are manufactured before the date of its publication, or to systems applied to agricultural machinery and tractors put into use before the date of its publication. |
| Status |
Published
|
| Reference Document |
ISO 18497-3:2024 (EQV)
|
| date of Availability (DAV) | 2024-08-28 |
| ICS | 65.060.01 - Agricultural machines and equipment in general |
| A-Deviation(s) | |
| Special National Condition(s) |
Legal
| Directive(s) | 2006/42/EC |
|---|---|
| Mandate(s) | M/396 |
| Citation in OJEU | No citation expected for Directive 2006/42/EC |
Implementation Dates
| date of Ratification (DOR) (1) | 2024-07-21 |
|---|---|
| date of Availability (DAV) (2) | 2024-08-28 |
| date of Announcement (DOA) (3) | 2024-11-28 |
| date of Publication (DOP) (4) | 2025-02-28 |
| date of Withdrawal (DOW) (5) | 2025-02-28 |
Relations
| Supersedes | EN ISO 18497:2018 |
|---|---|
| Superseded by | |
| Normative reference (6) |
ISO 12100:2010
ISO 13849-1:2023
ISO 13849-2:2012
ISO 18497-1:2024
ISO 18497-2:2024
ISO 18497-4:2024
ISO 25119-1:2018
ISO 25119-1:2018/Amd 1:2020
ISO 25119-2:2019
ISO 25119-3:2018
ISO 25119-3:2018/Amd 1:2020
ISO 25119-4:2018
ISO 25119-4:2018/Amd 1:2020
ISO 3767-1 AMD 1:2020
ISO 3767-1:2016
ISO 3767-2 AMD 1:2020
ISO 3767-2:2016
|
| Sales Points |
|
(1) Date of ratification (dor) date when the Technical Board notes the approval of an EN (and HD for CENELEC), from which time the standard may be said to be approved
(2) Date of availability (dav) date when the definitive text in the official language versions of an approved CEN/CENELEC publication is distributed by the Central Secretariat
(3) Date of announcement (doa) latest date by which the existence of an EN (and HD for CENELEC), a TS or a CWA has to be announced at national level
(4) Date of publication (dop) latest date by which an EN has to be implemented at national level by publication of an identical national standard or by endorsement
(5) Date of withdrawal (dow) latest date by which national standards conflicting with an EN (and HD for CENELEC) have to be withdrawn
(6) This list of normative references is purely indicative. The only official list of normative reference is the list of the published standard.
In the case of undated standard, a link to the last dated version is provided.
In the case of series, a link to each standard identified in the series is provided.
We also invite you to check (via the website) whether corrigenda and/or amendments shall be read in conjunction with the main standard.