The European Committee for Standardization is one of three European Standardization Organizations (together with CENELEC and ETSI) that have been officially recognized by the European Union and by the European Free Trade Association (EFTA) as being responsible for developing and defining voluntary standards at European level.
- |
Reference | prEN ISO 2507 rev |
---|---|
Title | Thermoplastics pipes and fittings - Vicat softening temperature: General test method and test conditions for Vinyl chloride - based (PVC-U, PVC-C, PVC-Hi) and Acryl nitrile - based (ABS, ASA) Pipes and Fittings |
Work Item Number | 00155A1G |
Abstract/Scope | The method specified is based on determining the temperature at which a standard indenter, under a force of 50 N ± 1 N, penetrates 1 mm into the surface of a test piece cut from the wall of a pipe or fitting while the temperature is raised at a constant rate. Is applicable only to thermoplastics materials for which it is possible to measure the temperature at which the rate of softening becomes rapid. Is based on ISO 306:1994 which, however, applies to materials in the form of sheets. |
Status |
En développement
|
Reference Document |
ISO 2507 (EQV)
|
date of Availability (DAV) | |
ICS | |
A-Deviation(s) | |
Special National Condition(s) |
Directive(s) | |
---|---|
Mandate(s) | |
Citation in OJEU |
date of Ratification (DOR) (1) | |
---|---|
date of Availability (DAV) (2) | |
date of Announcement (DOA) (3) | |
date of Publication (DOP) (4) | |
date of Withdrawal (DOW) (5) |
Supersedes |
EN ISO 2507-3:2017
EN ISO 2507-2:2017 EN ISO 2507-1:2017 |
---|---|
Superseded by |
(1) Date of ratification (dor) date when the Technical Board notes the approval of an EN (and HD for CENELEC), from which time the standard may be said to be approved
(2) Date of availability (dav) date when the definitive text in the official language versions of an approved CEN/CENELEC publication is distributed by the Central Secretariat
(3) Date of announcement (doa) latest date by which the existence of an EN (and HD for CENELEC), a TS or a CWA has to be announced at national level
(4) Date of publication (dop) latest date by which an EN has to be implemented at national level by publication of an identical national standard or by endorsement
(5) Date of withdrawal (dow) latest date by which national standards conflicting with an EN (and HD for CENELEC) have to be withdrawn
(6) This list of normative references is purely indicative. The only official list of normative reference is the list of the published standard.
In the case of undated standard, a link to the last dated version is provided.
In the case of series, a link to each standard identified in the series is provided.
We also invite you to check (via the website) whether corrigenda and/or amendments shall be read in conjunction with the main standard.