The European Committee for Standardization is one of three European Standardization Organizations (together with CENELEC and ETSI) that have been officially recognized by the European Union and by the European Free Trade Association (EFTA) as being responsible for developing and defining voluntary standards at European level.
- |
Reference | CEN/TR 17179:2018 |
---|---|
Title | Thermoplastics piping and ducting systems - Rainwater infiltration and storage attenuation systems - Practices for underground installation |
Work Item Number | 00155846 |
Abstract/Scope | This Technical Report is applicable to the installation of rainwater infiltration and storage/attenuation systems under gravity. This Technical Report covers installations including: - reservoirs made by assembled cuboid shaped thermoplastic boxes; - integral components; - ancillary components (e.g. access provisions and connections); - geotextiles and/or geomembranes; - embedment and backfill. These systems are intended for underground use in landscape, pedestrian or vehicular traffic areas and are used outside building structures. This Technical Report is only applicable to systems containing boxes to create a reservoir where the manufacturer has clearly stated in the installation instructions how the components should be assembled. This Technical Report is a guidance document. It provides a set of general guidelines which gives best practice for installation. NOTE 1 It is anticipated that additional recommendations and/or requirements (e.g. design, dimensioning and structural aspects) will be detailed in the relevant standards. NOTE 2 Attention is drawn to the need to comply with national or local regulations. |
Status |
Published
|
Reference Document | |
date of Availability (DAV) | 2018-01-31 |
ICS | 13.060.30 - Sewage water 23.040.05 - Pipelines and its parts for external sewage systems 23.040.20 - Plastics pipes |
A-Deviation(s) | |
Special National Condition(s) |
Directive(s) | |
---|---|
Mandate(s) | |
Citation in OJEU |
date of Ratification (DOR) (1) | 2017-12-17 |
---|---|
date of Availability (DAV) (2) | 2018-01-31 |
date of Announcement (DOA) (3) | |
date of Publication (DOP) (4) | |
date of Withdrawal (DOW) (5) |
Supersedes | |
---|---|
Superseded by | |
Normative reference (6) |
EN 13249
EN 1610:2015 |
Bibliographic references (7) | |
Sales Points |
(1) Date of ratification (dor) date when the Technical Board notes the approval of an EN (and HD for CENELEC), from which time the standard may be said to be approved
(2) Date of availability (dav) date when the definitive text in the official language versions of an approved CEN/CENELEC publication is distributed by the Central Secretariat
(3) Date of announcement (doa) latest date by which the existence of an EN (and HD for CENELEC), a TS or a CWA has to be announced at national level
(4) Date of publication (dop) latest date by which an EN has to be implemented at national level by publication of an identical national standard or by endorsement
(5) Date of withdrawal (dow) latest date by which national standards conflicting with an EN (and HD for CENELEC) have to be withdrawn
(6) This list of normative references is purely indicative. The only official list of normative reference is the list of the published standard.
In the case of undated standard, a link to the last dated version is provided.
In the case of series, a link to each standard identified in the series is provided.
We also invite you to check (via the website) whether corrigenda and/or amendments shall be read in conjunction with the main standard.
(7) This list of bibliographic references, which is provided for homegrown standards only, is purely indicative and was retrieved automatically using available XML files. It is limited to publications that have been published in the XML format. For standards that are not homegrown, the corresponding international standard should be consulted.