About CEN
The European Committee for Standardization is one of three European Standardization Organizations (together with CENELEC and ETSI) that have been officially recognized by the European Union and by the European Free Trade Association (EFTA) as being responsible for developing and defining voluntary standards at European level.
CEN/TC 121 |
- |
Welding and allied processes |
CEN/TC 121 Published Standards
|
Project reference, Title
|
Publication date
|
Sales Points
|
|---|---|---|
|
CEN ISO/TR 14745:2015
(WI=00121674) Welding - Post-weld heat treatment parameters for steels (ISO/TR 14745:2015) |
2015-01-14 |
|
|
CEN ISO/TR 15608:2017
(WI=00121676) Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017) |
2017-02-15 |
|
|
CEN ISO/TR 16060:2014
(WI=00121678) Destructive tests on welds in metallic materials - Etchants for macroscopic and microscopic examination (ISO/TR 16060:2003) |
2014-08-13 |
|
|
CEN ISO/TR 17641-3:2005
(WI=00121298) Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO/TR 17641-3:2005) |
2005-03-15 |
|
|
CEN ISO/TR 17844:2004
(WI=00121295) Welding - Comparison of standardised methods for the avoidance of cold cracks (ISO/TR 17844:2004) |
2004-09-15 |
|
|
CEN ISO/TR 20172:2021
(WI=00121794) Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021) |
2021-05-05 |
|
|
CEN ISO/TR 20173:2018
(WI=00121717) Welding - Grouping systems for materials - American materials (ISO 20173:2018) |
2018-08-22 |
|
|
CEN ISO/TR 20174:2020
(WI=00121810) Welding - Grouping systems for materials - Japanese materials (ISO/TR 20174:2020) |
2020-07-08 |
|
|
CEN ISO/TS 15011-6:2012
(WI=00121526) Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding (ISO/TS 15011-6:2012) |
2012-07-15 |
|
|
CEN ISO/TS 15011-6:2012/AC:2012
(WI=00121C22) Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding - Technical Corrigendum 1 (ISO/TS 15011-6:2012/Cor 1:2012) |
2012-09-15 |
|
|
CEN ISO/TS 17845:2004
(WI=00121333) Welding and allied processes - Designation system for imperfections (ISO/TS 17845:2004) |
2004-08-01 |
|
|
CEN ISO/TS 18166:2016
(WI=00121642) Numerical welding simulation - Execution and documentation (ISO/TS 18166:2016) |
2016-03-30 |
|
|
CEN/TR 14599:2005
(WI=00121406) Terms and definitions for welding purposes in relation with EN 1792 |
2005-06-15 |
|
|
CEN/TR 15068:2009
(WI=00121536) Gas welding equipment - Measurement of noise emitted by blowpipe for welding, cutting, heating, brazing and soldering - Measurement method |
2009-03-25 |
|
|
CEN/TR 15135:2005
(WI=00121102) Welding - Design and non-destructive testing of welds |
2005-06-15 |
|
|
CEN/TR 15235:2005
(WI=00121267) Welding - Methods for assessing imperfections in metallic structures |
2005-10-19 |
|
|
CEN/TR 15481:2006
(WI=00121463) Welding of reinforcing steel - Tack weldability - Test methods and performance requirements |
2006-12-13 |
|
|
CEN/TS 13259:2023
(WI=00121855) Gas welding equipment - Industrial manual and machine blowpipes for flame heating, flame brazing and allied processes |
2023-11-22 |
|
|
EN 1011-1:2009
(WI=00121465) Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding |
2009-03-04 |
|
|
EN 1011-2:2001
(WI=00121206) Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels |
2001-01-24 |
|
|
EN 1011-2:2001/A1:2003
(WI=00121387) Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels |
2003-12-10 |
|
|
EN 1011-3:2018
(WI=00121745) Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels |
2018-12-05 |
|
|
EN 1011-4:2000
(WI=00121157) Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys |
2000-09-20 |
|
|
EN 1011-4:2000/A1:2003
(WI=00121389) Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys |
2003-12-10 |
|
|
EN 1011-5:2003
(WI=00121300) Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steel |
2003-04-23 |
|
|
EN 1011-6:2018
(WI=00121746) Welding - Recommendation for welding of metallic materials - Part 6: Laser beam welding |
2018-12-05 |
|
|
EN 1011-7:2004
(WI=00121346) Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding |
2004-07-28 |
|
|
EN 12074:2000
(WI=00121126) Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes |
2000-04-19 |
|
|
EN 1256:2006
(WI=00121376) Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes |
2006-02-01 |
|
|
EN 12797:2000
(WI=00121117) Brazing - Destructive tests of brazed joints |
2000-07-19 |
|
|
EN 12797:2000/A1:2003
(WI=00121433) Brazing - Destructive tests of brazed joints |
2003-12-10 |
|
|
EN 12799:2000
(WI=00121116) Brazing - Non-destructive examination of brazed joints |
2000-07-19 |
|
|
EN 12799:2000/A1:2003
(WI=00121419) Brazing - Non-destructive examination of brazed joints |
2003-12-10 |
|
|
EN 13134:2000
(WI=00121115) Brazing - Procedure approval |
2000-08-23 |
|
|
EN 1326:1996
(WI=00121107) Gas welding equipment - Small kits for gas brazing and welding |
1996-05-22 |
|
|
EN 1327:1996
(WI=00121124) Gas welding equipment - Thermoplastic hoses for welding and allied processes |
1996-05-22 |
|
|
EN 13479:2017
(WI=00121673) Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials |
2017-06-28 |
|
|
EN 14324:2004
(WI=00121334) Brazing - Guidance on the application of brazed joints |
2004-09-22 |
|
|
EN 14532-1:2004
(WI=00121383) Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
2004-11-24 |
|
|
EN 14532-2:2004
(WI=00121250) Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
2004-11-24 |
|
|
EN 14532-3:2004
(WI=00121382) Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys |
2004-11-24 |
|
|
EN 14700:2022
(WI=00121857) Welding consumables - Welding consumables for hard-facing |
2022-11-30 |
|
|
EN 14717:2024
(WI=00121840) Welding and allied processes - Environmental check list |
2024-06-26 |
|
|
EN 1708-1:2010
(WI=00121518) Welding - Basic welded joint details in steel - Part 1: Pressurized components |
2010-01-13 |
|
|
EN 1708-2:2018
(WI=00121749) Welding - Basic weld joint details in steel - Part 2: Non internal pressurized components |
2018-12-05 |
|
|
EN 1708-3:2012
(WI=00121557) Welding - Basic weld joint details in steel - Part 3: Clad, buttered and lined pressurized components |
2012-03-07 |
|
|
EN 1792:2003
(WI=00121325) Welding - Multilingual list of terms for welding and related processes |
2003-03-05 |
|
|
EN 17942:2024
(WI=00121891) Welding and allied processes - Gas welding equipment - Safety requirements for thermoprocess equipment with open firing oxy-fuel gas welding equipment |
2024-09-11 |
|
|
EN 18007-1:2024
(WI=00121924) Electromagnetic pulse welding - Part 1: Welding knowledge, terminology and vocabulary |
2024-07-31 |
|
|
EN 18007-2:2024
(WI=00121927) Electromagnetic pulse welding - Part 2: Design of welded joints |
2024-07-31 |
|
|
EN 18007-3:2024
(WI=00121928) Electromagnetic pulse welding - Part 3: Qualification of welding operators and weld setters |
2024-07-31 |
|
|
EN 18007-4:2024
(WI=00121925) Electromagnetic pulse welding - Part 4: Specification and qualification of welding procedures |
2024-07-31 |
|
|
EN 18007-5:2024
(WI=00121926) Electromagnetic pulse welding - Part 5: Quality and inspection requirements |
2024-07-31 |
|
|
EN 20693:1991
(WI=00121025) Dimensions of seam welding wheel blanks (ISO 693:1982) |
1991-11-06 |
|
|
EN 20865:1991
(WI=00121024) Slots in plates for projection welding machines (ISO 865:1981) |
1991-11-06 |
|
|
EN 25184:1994
(WI=00121032) Straight resistance spot welding electrodes (ISO 5184:1979) |
1994-03-21 |
|
|
EN 25822:1991
(WI=00121030) Spot welding equipment - Taper plug gauges and taper ring gauges (ISO 5822:1988) |
1991-11-06 |
|
|
EN 25827:1992
(WI=00121056) Spot welding - Electrode back-ups and clamps (ISO 5827:1983) |
1992-05-27 |
|
|
EN 27931:1992
(WI=00121057) Insulation caps and bushes for resistance welding equipment (ISO 7931:1985) |
1992-05-27 |
|
|
EN 28206:1992
(WI=00121078) Acceptance tests for oxygen cutting machines - Reproducible accuracy - Operational characteristics (ISO 8206:1991) |
1992-07-07 |
|
|
EN 29313:1992
(WI=00121063) Resistance spot welding equipment - Cooling tubes (ISO 9313:1989) |
1992-05-27 |
|
|
EN 29455-8:1993
(WI=00121141) Soft soldering fluxes - Test methods - Part 8: Determination of zinc content (ISO 9455-8:1991) |
1993-08-16 |
|
|
EN 560:2018
(WI=00121748) Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes |
2018-09-12 |
|
|
EN 561:2002
(WI=00121374) Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes |
2002-06-19 |
|
|
EN ISO 10042:2018
(WI=00121743) Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections (ISO 10042:2018) |
2018-07-11 |
|
|
EN ISO 10225:2021
(WI=00121854) Gas welding equipment - Marking for equipment used for gas welding, cutting and allied processes (ISO 10225:2013) |
2021-03-03 |
|
|
EN ISO 10447:2022
(WI=00121901) Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2022) |
2022-12-07 |
|
|
EN ISO 10656:2021
(WI=00121833) Resistance welding equipment - Transformers - Integrated transformers for welding guns (ISO 10656:2016, Corrected version 2016-08) |
2021-01-13 |
|
|
EN ISO 10675-1:2021
(WI=00121816) Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2021) |
2021-12-15 |
|
|
EN ISO 10675-2:2021
(WI=00121817) Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2021, Corrected version 2022-02) |
2021-12-15 |
|
|
EN ISO 1071:2015
(WI=00121664) Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification (ISO 1071:2015) |
2015-12-16 |
|
|
EN ISO 10863:2020
(WI=00121788) Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020) |
2020-06-03 |
|
|
EN ISO 10882-1:2024
(WI=00121903) Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2024) |
2024-05-08 |
|
|
EN ISO 10882-2:2024
(WI=00121904) Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO 10882-2:2024) |
2024-05-08 |
|
|
EN ISO 1089:2023
(WI=00121917) Resistance welding equipment - Electrode taper fits for spot welding equipment - Dimensions (ISO 1089:2023) |
2023-07-26 |
|
|
EN ISO 11666:2018
(WI=00121727) Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018) |
2018-02-21 |
|
|
EN ISO 12153:2022
(WI=00121900) Welding consumables - Tubular-cored electrodes for gas-shielded and non-gas-shielded metal arc welding of nickel and nickel alloys - Classification (ISO 12153:2022) |
2022-11-16 |
|
|
EN ISO 12224-1:2024
(WI=00121906) Solder wire, solid and flux-cored - Specification and test methods - Part 1: Classification and performance requirements (ISO 12224-1:2024) |
2024-05-15 |
|
|
EN ISO 12224-2:2024
(WI=00121907) Solder wire, solid and flux-cored - Specification and test methods - Part 2: Determination of flux content (ISO 12224-2:2024) |
2024-05-15 |
|
|
EN ISO 12932:2013
(WI=00121543) Welding - Laser-arc hybrid welding of steels, nickel and nickel alloys - Quality levels for imperfections (ISO 12932:2013) |
2013-06-19 |
|
|
EN ISO 12996:2013
(WI=00121621) Mechanical joining - Destructive testing of joints - Specimen dimensions and test procedure for tensile shear testing of single joints (ISO 12996:2013) |
2013-07-03 |
|
|
EN ISO 13585:2024
(WI=00121934) Brazing - Qualification testing of brazers and brazing operators (ISO 13585:2021) |
2024-07-24 |
|
|
EN ISO 13588:2019
(WI=00121768) Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019) |
2019-03-06 |
|
|
EN ISO 13916:2017
(WI=00121715) Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2017) |
2017-12-06 |
|
|
EN ISO 13918:2018
(WI=00121689) Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05) |
2018-01-31 |
|
|
EN ISO 13918:2018/A1:2021
(WI=00121887) Welding - Studs and ceramic ferrules for arc stud welding - Amendment 1 (ISO 13918:2017/Amd 1:2021) |
2021-09-15 |
|
|
EN ISO 13919-1:2019
(WI=00121789) Electron and laser-beam welded joints - Requirements and recommendations on quality levels for imperfections - Part 1: Steel, nickel, titanium and their alloys (ISO 13919-1:2019) |
2019-11-20 |
|
|
EN ISO 13919-2:2021
(WI=00121790) Electron and laser-beam welded joints - Requirements and recommendations on quality levels for imperfections - Part 2: Aluminium, magnesium and their alloys and pure copper (ISO 13919-2:2021) |
2021-02-17 |
|
|
EN ISO 13920:2023
(WI=00121938) Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position (ISO 13920:2023) |
2023-06-14 |
|
|
EN ISO 14113:2013
(WI=00121659) Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
2013-10-02 |
|
|
EN ISO 14114:2018
(WI=00121719) Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO 14114:2017) |
2018-01-31 |
|
|
EN ISO 14171:2016
(WI=00121711) Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification (ISO 14171:2016) |
2016-07-27 |
|
|
EN ISO 14172:2023
(WI=00121886) Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2023) |
2023-08-02 |
|
|
EN ISO 14174:2019
(WI=00121783) Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification (ISO 14174:2019) |
2019-05-15 |
|
|
EN ISO 14175:2008
(WI=00121443) Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008) |
2008-03-01 |
|
|
EN ISO 14270:2016
(WI=00121660) Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds (ISO 14270:2016) |
2016-03-23 |
|
|
EN ISO 14271:2017
(WI=00121758) Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017) |
2017-09-27 |
|
|
EN ISO 14272:2016
(WI=00121635) Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds (ISO 14272:2016, Corrected version 2016-09-01) |
2016-03-23 |
|
|
EN ISO 14273:2016
(WI=00121636) Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds (ISO 14273:2016) |
2016-03-23 |
|
|
EN ISO 14323:2015
(WI=00121633) Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds (ISO 14323:2015) |
2015-03-04 |
|
|
EN ISO 14324:2003
(WI=00121329) Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints (ISO/FDIS 14324:2003) |
2003-07-01 |
|
|
EN ISO 14341:2020
(WI=00121814) Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2020) |
2020-09-16 |
|
|
EN ISO 14343:2017
(WI=00121703) Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification (ISO 14343:2017) |
2017-04-26 |
|
|
EN ISO 14344:2024
(WI=00121956) Welding consumables - Procurement of filler materials and fluxes (ISO 14344:2024) |
2024-09-25 |
|
|
EN ISO 14373:2024
(WI=00121932) Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels (ISO 14373:2024) |
2024-01-31 |
|
|
EN ISO 14554-1:2013
(WI=00121627) Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2013) |
2013-12-18 |
|
|
EN ISO 14554-2:2013
(WI=00121628) Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements (ISO 14554-2:2013) |
2013-12-18 |
|
|
EN ISO 14555:2017
(WI=00121744) Welding - Arc stud welding of metallic materials (ISO 14555:2017) |
2017-06-14 |
|
|
EN ISO 14731:2019
(WI=00121714) Welding coordination - Tasks and responsibilities (ISO 14731:2019) |
2019-03-27 |
|
|
EN ISO 14732:2013
(WI=00121551) Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013) |
2013-08-07 |
|
|
EN ISO 14744-1:2008
(WI=00121491) Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2008) |
2008-05-01 |
|
|
EN ISO 14744-2:2000
(WI=00121221) Welding - Acceptance inspection of electron beam welding machines - Part 2: Measurement of accelerating voltage characteristics (ISO 14744-2:2000) |
2000-04-15 |
|
|
EN ISO 14744-3:2000
(WI=00121222) Welding - Acceptance inspection of electron beam welding machines - Part 3: Measurement of beam current characteristics (ISO 14744-3:2000) |
2000-04-15 |
|
|
EN ISO 14744-4:2000
(WI=00121223) Welding - Acceptance inspection of electron beam welding machines - Part 4: Measurement of welding speed (ISO 14744-4:2000) |
2000-04-15 |
|
|
EN ISO 14744-5:2000
(WI=00121224) Welding - Acceptance inspection of electron beam welding machines - Part 5: Measurement of run-out accuracy (ISO 14744-5:2000) |
2000-04-15 |
|
|
EN ISO 14744-6:2000
(WI=00121225) Welding - Acceptance inspection of electron beam welding machines - Part 6: Measurement of stability of spot position (ISO 14744-6:2000) |
2000-04-15 |
|
|
EN ISO 15011-1:2009
(WI=00121474) Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis (ISO 15011-1:2009) |
2009-10-15 |
|
|
EN ISO 15011-2:2009
(WI=00121475) Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc welding, cutting and gouging (ISO 15011-2:2009) |
2009-10-15 |
|
|
EN ISO 15011-3:2009
(WI=00121440) Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 3: Determination of ozone emission rate during arc welding (ISO 15011-3:2009) |
2009-10-15 |
|
|
EN ISO 15011-4:2018
(WI=00121724) Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets (ISO 15011-4:2017) |
2018-02-07 |
|
|
EN ISO 15011-5:2011
(WI=00121532) Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials using pyrolysis-gas chromatography-mass spectrometry (ISO 15011-5:2011) |
2011-10-01 |
|
|
EN ISO 15296:2018
(WI=00121741) Gas welding equipment - Vocabulary (ISO 15296:2017) |
2018-01-10 |
|
|
EN ISO 15607:2019
(WI=00121756) Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2019) |
2019-10-23 |
|
|
EN ISO 15609-1:2019
(WI=00121792) Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2019) |
2019-10-02 |
|
|
EN ISO 15609-2:2019
(WI=00121799) Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2019) |
2019-10-02 |
|
|
EN ISO 15609-3:2004
(WI=00121276) Specification and qualification of welding procedures for metallic materials - Welding procedures specification - Part 3: Electron beam welding (ISO 15609-3:2004) |
2004-08-01 |
|
|
EN ISO 15609-4:2009
(WI=00121506) Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO 15609-4:2009) |
2009-05-15 |
|
|
EN ISO 15609-5:2011
(WI=00121559) Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO 15609-5:2011, Corrected version 2011-12-01) |
2011-10-01 |
|
|
EN ISO 15609-6:2013
(WI=00121544) Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 6: Laser-arc hybrid welding (ISO 15609-6:2013) |
2013-03-20 |
|
|
EN ISO 15610:2024
(WI=00121953) Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2024) |
2024-03-13 |
|
|
EN ISO 15611:2024
(WI=00121864) Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2024) |
2024-01-17 |
|
|
EN ISO 15612:2018
(WI=00121677) Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure specification (ISO 15612:2018) |
2018-07-18 |
|
|
EN ISO 15613:2004
(WI=00121282) Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
2004-06-15 |
|
|
EN ISO 15614-10:2005
(WI=00121247) Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 10: Hyperbaric dry welding (ISO 15614-10:2005) |
2005-02-15 |
|
|
EN ISO 15614-11:2002
(WI=00121174) Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002) |
2002-03-15 |
|
|
EN ISO 15614-12:2021
(WI=00121818) Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding (ISO 15614-12:2021) |
2021-10-27 |
|
|
EN ISO 15614-13:2023
(WI=00121931) Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2023) |
2023-11-22 |
|
|
EN ISO 15614-14:2013
(WI=00121604) Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys (ISO 15614-14:2013) |
2013-06-19 |
|
|
EN ISO 15614-1:2017
(WI=00121531) Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2017, Corrected version 2017-10-01) |
2017-06-21 |
|
|
EN ISO 15614-1:2017/A1:2019
(WI=00121793) Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys - Amendment 1 (ISO 15614-1:2017/Amd 1:2019) |
2019-08-21 |
|
|
EN ISO 15614-2:2005
(WI=00121284) Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) |
2005-04-15 |
|
|
EN ISO 15614-2:2005/AC:2009
(WI=00121C19) Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005/Cor 2:2009) |
2009-04-29 |
|
|
EN ISO 15614-3:2008
(WI=00121098) Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 3: Fusion welding of non-alloyed and low-alloyed cast irons (ISO 15614-3:2008) |
2008-03-15 |
|
|
EN ISO 15614-4:2005
(WI=00121171) Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005) |
2005-07-01 |
|
|
EN ISO 15614-4:2005/AC:2007
(WI=00121C17) Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005/Cor 1:2007) |
2007-10-24 |
|
|
EN ISO 15614-5:2024
(WI=00121867) Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2024) |
2024-09-11 |
|
|
EN ISO 15614-6:2006
(WI=00121286) Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006) |
2006-04-01 |
|
|
EN ISO 15614-7:2019
(WI=00121802) Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2016) |
2019-11-27 |
|
|
EN ISO 15614-8:2016
(WI=00121609) Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2016) |
2016-04-06 |
|
|
EN ISO 15615:2022
(WI=00121824) Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices (ISO 15615:2022) |
2022-11-16 |
|
|
EN ISO 15616-1:2003
(WI=00121290) Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003) |
2003-03-01 |
|
|
EN ISO 15616-2:2003
(WI=00121292) Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003) |
2003-03-01 |
|
|
EN ISO 15616-3:2003
(WI=00121293) Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003) |
2003-03-01 |
|
|
EN ISO 15616-4:2021
(WI=00121823) Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 4: Machines with 2-D moving optics (ISO 15616-4:2008) |
2021-01-13 |
|
|
EN ISO 15618-1:2016
(WI=00121654) Qualification testing of welders for underwater welding - Part 1: Hyperbaric wet welding (ISO 15618-1:2016) |
2016-09-28 |
|
|
EN ISO 15618-2:2001
(WI=00121249) Qualification testing of welders for under-water welding - Part 2: Diver-welders and welding operators for hyperbaric dry welding (ISO 15618-2:2001) |
2001-12-15 |
|
|
EN ISO 15620:2019
(WI=00121766) Welding - Friction welding of metallic materials (ISO 15620:2019) |
2019-06-19 |
|
|
EN ISO 15626:2018
(WI=00121787) Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels (ISO 15626:2018) |
2018-08-22 |
|
|
EN ISO 15653:2018
(WI=00121752) Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018) |
2018-01-31 |
|
|
EN ISO 15792-1:2020
(WI=00121812) Welding consumables - Test methods - Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys (ISO 15792-1:2020) |
2020-09-16 |
|
|
EN ISO 15792-2:2020
(WI=00121815) Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel (ISO 15792-2:2020) |
2020-09-16 |
|
|
EN ISO 15792-3:2011
(WI=00121597) Welding consumables - Test methods - Part 3: Classification testing of positional capacity and root penetration of welding consumables in a fillet weld (ISO 15792-3:2011) |
2011-05-15 |
|
|
EN ISO 16432:2007
(WI=00121483) Resistance welding - Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) (ISO 16432:2006) |
2007-06-20 |
|
|
EN ISO 16433:2007
(WI=00121484) Resistance welding - Procedure for seam welding of uncoated and coated low carbon steels (ISO 16433:2006) |
2007-06-20 |
|
|
EN ISO 16834:2012
(WI=00121599) Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012) |
2012-05-01 |
|
|
EN ISO 17279-1:2018
(WI=00121696) Welding - Micro joining of 2nd generation high temperature superconductors - Part 1: General requirements for the procedure (ISO 17279-1:2018) |
2018-11-07 |
|
|
EN ISO 17279-2:2018
(WI=00121694) Welding - Micro joining of 2nd generation high temperature superconductors - Part 2: Qualification for welding and testing personnel (ISO 17279-2:2018) |
2018-11-21 |
|
|
EN ISO 17279-3:2021
(WI=00121836) Welding - Micro joining of second generation high temperature superconductors - Part 3: Test methods for joints (ISO 17279-3:2021) |
2021-03-10 |
|
|
EN ISO 17405:2022
(WI=00121896) Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion (ISO 17405:2022) |
2022-05-25 |
|
|
EN ISO 17632:2015
(WI=00121669) Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015) |
2015-12-16 |
|
|
EN ISO 17633:2018
(WI=00121713) Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2017) |
2018-01-31 |
|
|
EN ISO 17633:2018/A1:2021
(WI=00121888) Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification - Amendment 1 (ISO 17633:2017/Amd 1:2021) |
2021-06-23 |
|
|
EN ISO 17634:2015
(WI=00121670) Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification (ISO 17634:2015) |
2015-08-19 |
|
|
EN ISO 17635:2016
(WI=00121687) Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016) |
2016-12-14 |
|
|
EN ISO 17636-1:2022
(WI=00121805) Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2022) |
2022-08-03 |
|
|
EN ISO 17636-2:2022
(WI=00121806) Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2022, Corrected version 2023-02) |
2022-10-05 |
|
|
EN ISO 17637:2016
(WI=00121692) Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016) |
2016-12-14 |
|
|
EN ISO 17638:2016
(WI=00121693) Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016) |
2016-11-16 |
|
|
EN ISO 17639:2022
(WI=00121852) Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds (ISO 17639:2022) |
2022-02-16 |
|
|
EN ISO 17640:2018
(WI=00121798) Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2018) |
2018-11-28 |
|
|
EN ISO 17641-1:2004
(WI=00121257) Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 1: General (ISO 17641-1:2004) |
2004-08-01 |
|
|
EN ISO 17641-2:2015
(WI=00121700) Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17641-2:2015) |
2015-11-04 |
|
|
EN ISO 17642-1:2004
(WI=00121316) Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 1: General (ISO 17642-1:2004) |
2004-08-01 |
|
|
EN ISO 17642-2:2005
(WI=00121317) Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17642-2:2005) |
2005-03-15 |
|
|
EN ISO 17642-3:2005
(WI=00121318) Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO 17642-3:2005) |
2005-03-15 |
|
|
EN ISO 17643:2015
(WI=00121638) Non-destructive testing of welds - Eddy current examination of welds by complex plane analysis (ISO 17643:2015) |
2015-09-30 |
|
|
EN ISO 17652-1:2003
(WI=00121361) Welding - Test for shop primers in relation to welding and allied processes - Part 1: General requirements (ISO 17652-1:2003) |
2003-05-15 |
|
|
EN ISO 17652-2:2003
(WI=00121362) Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of shop primers (ISO 17652-2:2003) |
2003-05-15 |
|
|
EN ISO 17652-3:2003
(WI=00121363) Welding - Test for shop primers in relation to welding and allied processes - Part 3: Thermal cutting (ISO 17652-3:2003) |
2003-05-15 |
|
|
EN ISO 17652-4:2003
(WI=00121364) Welding - Test for shop primers in relation to welding and allied processes - Part 4: Emission of fumes and gases (ISO 17652-4:2003) |
2003-05-15 |
|
|
EN ISO 17653:2012
(WI=00121561) Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds (ISO 17653:2012) |
2012-05-01 |
|
|
EN ISO 17654:2011
(WI=00121562) Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011) |
2011-09-15 |
|
|
EN ISO 17657-1:2007
(WI=00121477) Resistance welding - Welding current measurement for resistance welding - Part 1: Guidelines for measurement (ISO 17657-1:2005) |
2007-06-20 |
|
|
EN ISO 17657-2:2007
(WI=00121478) Resistance welding - Welding current measurement for resistance welding - Part 2: Welding current meter with current sensing coil (ISO 17657-2:2005) |
2007-06-20 |
|
|
EN ISO 17657-3:2007
(WI=00121479) Resistance welding - Welding current measurement for resistance welding - Part 3: Current sensing coil (ISO 17657-3:2005) |
2007-06-20 |
|
|
EN ISO 17657-4:2007
(WI=00121480) Resistance welding - Welding current measurement for resistance welding - Part 4: Calibration system (ISO 17657-4:2005) |
2007-06-20 |
|
|
EN ISO 17657-5:2007
(WI=00121481) Resistance welding - Welding current measurement for resistance welding - Part 5: Verification of welding current measuring system (ISO 17657-5:2005) |
2007-06-20 |
|
|
EN ISO 17658:2015
(WI=00121686) Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology (ISO 17658:2002) |
2015-04-22 |
|
|
EN ISO 17659:2004
(WI=00121405) Welding - Multilingual terms for welded joints with illustrations (ISO 17659:2002) |
2004-06-23 |
|
|
EN ISO 17660-1:2006
(WI=00121445) Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO 17660-1:2006) |
2006-09-01 |
|
|
EN ISO 17660-2:2006
(WI=00121446) Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints (ISO 17660-2:2006) |
2006-09-01 |
|
|
EN ISO 17662:2016
(WI=00121680) Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016) |
2016-03-23 |
|
|
EN ISO 17663:2023
(WI=00121902) Welding - Quality requirements for heat treatment in connection with welding and allied processes (ISO 17663:2023) |
2023-05-10 |
|
|
EN ISO 17672:2024
(WI=00121915) Brazing - Filler metals (ISO 17672:2024) |
2024-05-01 |
|
|
EN ISO 17677-1:2021
(WI=00121858) Resistance welding - Vocabulary - Part 1: Spot, projection and seam welding (ISO 17677-1:2021) |
2021-03-10 |
|
|
EN ISO 17683:2015
(WI=00121702) Ships and marine technology - Ceramic weld backing for marine use (ISO 17683:2014) |
2015-12-02 |
|
|
EN ISO 17777:2016
(WI=00121617) Welding consumables - Covered electrodes for manual metal arc welding of copper and copper alloys - Classification (ISO 17777:2016) |
2016-06-08 |
|
|
EN ISO 17916:2016
(WI=00121645) Safety of thermal cutting machines (ISO 17916:2016) |
2016-04-13 |
|
|
EN ISO 18273:2015
(WI=00121668) Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification (ISO 18273:2015) |
2015-12-16 |
|
|
EN ISO 18274:2023
(WI=00121849) Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification (ISO 18274:2023) |
2023-05-10 |
|
|
EN ISO 18275:2018
(WI=00121763) Welding consumables - Covered electrodes for manual metal arc welding of high-strength steels - Classification (ISO 18275:2018) |
2018-09-26 |
|
|
EN ISO 18276:2024
(WI=00121949) Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2024) |
2024-07-17 |
|
|
EN ISO 18278-1:2022
(WI=00121889) Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2022) |
2022-06-08 |
|
|
EN ISO 18278-2:2016
(WI=00121542) Resistance welding - Weldability - Part 2: Evaluation procedures for weldability in spot welding (ISO 18278-2:2016) |
2016-02-24 |
|
|
EN ISO 18278-3:2017
(WI=00121738) Resistance welding - Weldability - Part 3: Evaluation procedures for weldability in spot weld bonding (ISO 18278-3:2017) |
2017-09-13 |
|
|
EN ISO 18279:2023
(WI=00121897) Brazing - Imperfections in brazed joints (ISO 18279:2023) |
2023-11-22 |
|
|
EN ISO 18496:2021
(WI=00121893) Brazing - Fluxes for brazing - Classification and technical delivery conditions (ISO 18496:2020) |
2021-10-13 |
|
|
EN ISO 18592:2019
(WI=00121776) Resistance welding - Destructive testing of welds - Method for the fatigue testing of multi-spot-welded specimens (ISO 18592:2019) |
2019-09-18 |
|
|
EN ISO 18594:2007
(WI=00121436) Resistance spot-, projection- and seam-welding - Method for determining the transition resistance on aluminium and steel material (ISO 18594:2007) |
2007-03-01 |
|
|
EN ISO 18595:2021
(WI=00121777) Resistance welding - Spot welding of aluminium and aluminium alloys - Weldability, welding and testing (ISO 18595:2021) |
2021-02-10 |
|
|
EN ISO 18785-1:2021
(WI=00121826) Friction stir spot welding - Aluminium - Part 1: Vocabulary (ISO 18785-1:2018) |
2021-01-13 |
|
|
EN ISO 18785-2:2021
(WI=00121834) Friction stir spot welding - Aluminium - Part 2: Design of weld joints (ISO 18785-2:2018) |
2021-01-13 |
|
|
EN ISO 18785-3:2021
(WI=00121825) Friction stir spot welding - Aluminium - Part 3: Qualification of welding personnel (ISO 18785-3:2018) |
2021-01-13 |
|
|
EN ISO 18785-4:2021
(WI=00121827) Friction stir spot welding - Aluminium - Part 4: Specification and qualification of welding procedures (ISO 18785-4:2018) |
2021-01-13 |
|
|
EN ISO 18785-5:2021
(WI=00121828) Friction stir spot welding - Aluminium - Part 5: Quality and inspection requirements (ISO 18785-5:2018) |
2021-01-13 |
|
|
EN ISO 19285:2017
(WI=00121739) Non-destructive testing of welds - Phased array ultrasonic testing (PAUT) - Acceptance levels (ISO 19285:2017) |
2017-09-13 |
|
|
EN ISO 19288:2016
(WI=00121684) Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys - Classification (ISO 19288:2016) |
2016-06-08 |
|
|
EN ISO 20168:2021
(WI=00121829) Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016) |
2021-01-13 |
|
|
EN ISO 20378:2018
(WI=00121785) Welding consumables - Rods for gas welding of non-alloy and creep-resisting steels - Classification (ISO 20378:2017) |
2018-10-03 |
|
|
EN ISO 20601:2018
(WI=00121740) Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components (ISO 20601:2018) |
2018-12-19 |
|
|
EN ISO 21904-1:2020
(WI=00121771) Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: General requirements (ISO 21904-1:2020) |
2020-03-11 |
|
|
EN ISO 21904-2:2020
(WI=00121772) Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 2: Requirements for testing and marking of separation efficiency (ISO 21904-2:2020) |
2020-03-11 |
|
|
EN ISO 21904-3:2018
(WI=00121781) Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices (ISO 21904-3:2018) |
2018-03-21 |
|
|
EN ISO 21904-4:2020
(WI=00121774) Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 4: Determination of the minimum air volume flow rate of capture devices (ISO 21904-4:2020) |
2020-03-11 |
|
|
EN ISO 21952:2012
(WI=00121600) Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels - Classification (ISO 21952:2012) |
2012-05-01 |
|
|
EN ISO 22825:2017
(WI=00121721) Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017) |
2017-11-01 |
|
|
EN ISO 22826:2021
(WI=00121856) Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005) |
2021-03-03 |
|
|
EN ISO 22827-1:2005
(WI=00121434) Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 1: Laser assembly (ISO 22827-1:2005) |
2005-10-15 |
|
|
EN ISO 22827-2:2005
(WI=00121435) Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 2: Moving mechanism (ISO 22827-2:2005) |
2005-10-15 |
|
|
EN ISO 22829:2017
(WI=00121698) Resistance welding equipment - Transformers - Integrated transformer-rectifier units for welding guns operating at 1 000 Hz (ISO 22829:2017) |
2017-10-25 |
|
|
EN ISO 23277:2015
(WI=00121648) Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015) |
2015-03-11 |
|
|
EN ISO 23278:2015
(WI=00121649) Non-destructive testing of welds - Magnetic particle testing - Acceptance levels (ISO 23278:2015) |
2015-03-04 |
|
|
EN ISO 23279:2017
(WI=00121729) Non-destructive testing of welds - Ultrasonic testing - Characterization of discontinuities in welds (ISO 23279:2017) |
2017-09-13 |
|
|
EN ISO 23864:2021
(WI=00121898) Non‐destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021) |
2021-12-15 |
|
|
EN ISO 2401:2018
(WI=00121762) Welding consumables - Covered electrodes - Determination of the efficiency, metal recovery and deposition coefficient (ISO 2401:2018) |
2018-09-12 |
|
|
EN ISO 24034:2020
(WI=00121813) Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO 24034:2020) |
2020-08-26 |
|
|
EN ISO 24373:2018
(WI=00121764) Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification (ISO 24373:2018) |
2018-09-19 |
|
|
EN ISO 24598:2019
(WI=00121784) Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels - Classification (ISO 24598:2019) |
2019-05-15 |
|
|
EN ISO 2503:2009
(WI=00121520) Gas welding equipment - Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) (ISO 2503:2009) |
2009-07-15 |
|
|
EN ISO 2503:2009/A1:2015
(WI=00121622) Gas welding equipment - Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) (ISO 2503:2009/Amd 1:2015) |
2015-04-22 |
|
|
EN ISO 25239-1:2020
(WI=00121730) Friction stir welding - Aluminium - Part 1: Vocabulary (ISO 25239-1:2020) |
2020-07-22 |
|
|
EN ISO 25239-2:2020
(WI=00121731) Friction stir welding - Aluminium - Part 2: Design of weld joints (ISO 25239-2:2020) |
2020-07-22 |
|
|
EN ISO 25239-3:2020
(WI=00121732) Friction stir welding - Aluminium - Part 3: Qualification of welding operators (ISO 25239-3:2020) |
2020-07-22 |
|
|
EN ISO 25239-4:2020
(WI=00121733) Friction stir welding - Aluminium - Part 4: Specification and qualification of welding procedures (ISO 25239-4:2020) |
2020-07-22 |
|
|
EN ISO 25239-5:2020
(WI=00121734) Friction stir welding - Aluminium - Part 5: Quality and inspection requirements (ISO 25239-5:2020) |
2020-07-22 |
|
|
EN ISO 2553:2019
(WI=00121769) Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO 2553:2019, Corrected version 2021-09) |
2019-04-17 |
|
|
EN ISO 2560:2020
(WI=00121811) Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2020) |
2020-09-16 |
|
|
EN ISO 25901-2:2023
(WI=00121839) Welding and allied processes - Vocabulary - Part 2: Health and safety (ISO 25901-2:2022) |
2023-01-11 |
|
|
EN ISO 25980:2023
(WI=00121908) Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes (ISO 25980:2023, Corrected version 2023-08) |
2023-05-17 |
|
|
EN ISO 26304:2018
(WI=00121765) Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification (ISO 26304:2017) |
2018-02-07 |
|
|
EN ISO 3580:2017
(WI=00121712) Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification (ISO 3580:2017) |
2017-05-10 |
|
|
EN ISO 3581:2023
(WI=00121899) Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification (ISO 3581:2023) |
2023-08-16 |
|
|
EN ISO 3677:2024
(WI=00121945) Filler metal for brazing - Designation (ISO 3677:2024) |
2024-05-08 |
|
|
EN ISO 3690:2018
(WI=00121757) Welding and allied processes - Determination of hydrogen content in arc weld metal (ISO 3690:2018) |
2018-09-12 |
|
|
EN ISO 3821:2019
(WI=00121796) Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2019, Corrected version 2021-05) |
2019-09-25 |
|
|
EN ISO 3834-1:2021
(WI=00121860) Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2021) |
2021-09-22 |
|
|
EN ISO 3834-2:2021
(WI=00121861) Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2021) |
2021-04-28 |
|
|
EN ISO 3834-3:2021
(WI=00121862) Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2021) |
2021-04-28 |
|
|
EN ISO 3834-4:2021
(WI=00121863) Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2021) |
2021-04-28 |
|
|
EN ISO 3834-5:2021
(WI=00121822) Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2021) |
2021-10-27 |
|
|
EN ISO 3834-6:2024
(WI=00121909) Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834 series (ISO 3834-6:2024) |
2024-03-13 |
|
|
EN ISO 4063:2023
(WI=00121800) Welding, brazing, soldering and cutting - Nomenclature of processes and reference numbers (ISO 4063:2023) |
2023-04-05 |
|
|
EN ISO 4136:2022
(WI=00121850) Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2022) |
2022-06-08 |
|
|
EN ISO 4761:2022
(WI=00121930) Non-destructive testing of welds - Phased array ultrasonic testing (UT-PA) for thin-walled steel components - Acceptance levels (ISO 4761:2022) |
2022-12-21 |
|
|
EN ISO 5171:2019
(WI=00121718) Gas welding equipment - Pressure gauges used in welding, cutting and allied processes (ISO 5171:2019) |
2019-05-29 |
|
|
EN ISO 5172:2006
(WI=00121398) Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications and tests (ISO 5172:2006) |
2006-04-01 |
|
|
EN ISO 5172:2006/A1:2012
(WI=00121570) Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications and tests - Amendment 1 (ISO 5172:2006/Amd 1:2012) |
2012-07-15 |
|
|
EN ISO 5172:2006/A2:2015
(WI=00121623) Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications and tests (ISO 5172:2006/Amd 2:2015) |
2015-04-22 |
|
|
EN ISO 5173:2023
(WI=00121890) Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2023) |
2023-01-25 |
|
|
EN ISO 5175-1:2017
(WI=00121736) Gas welding equipment - Safety devices - Part 1: Devices incorporating a flame (flashback) arrestor (ISO 5175-1:2017) |
2017-11-29 |
|
|
EN ISO 5175-2:2017
(WI=00121735) Gas welding equipment - Safety devices - Part 2: Devices not incorporating a flame (flashback) arrestor (ISO 5175-2:2017, Corrected version 2019-01) |
2017-11-29 |
|
|
EN ISO 5178:2019
(WI=00121797) Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints (ISO 5178:2019) |
2019-02-27 |
|
|
EN ISO 5179:2023
(WI=00121933) Investigation of brazeability with spreading and gap-filling test (ISO 5179:2021) |
2023-05-10 |
|
|
EN ISO 5182:2016
(WI=00121699) Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016) |
2016-08-24 |
|
|
EN ISO 5183-1:2000
(WI=00121264) Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1: Conical fixing, taper 1:10 (ISO 5183-1:1998) |
2000-04-19 |
|
|
EN ISO 5183-2:2001
(WI=00121379) Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes (ISO 5183-2:2000) |
2001-10-24 |
|
|
EN ISO 544:2024
(WI=00121957) Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings (ISO 544:2024) |
2024-09-25 |
|
|
EN ISO 5817:2023
(WI=00121821) Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2023) |
2023-03-15 |
|
|
EN ISO 5821:2009
(WI=00121539) Resistance welding - Spot welding electrode caps (ISO 5821:2009) |
2009-11-25 |
|
|
EN ISO 5826:2014
(WI=00121583) Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:2014) |
2014-02-19 |
|
|
EN ISO 5828:2001
(WI=00121302) Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics (ISO 5828:2001) |
2001-03-01 |
|
|
EN ISO 5829:2021
(WI=00121832) Resistance spot welding - Electrode adaptors, female taper 1:10 (ISO 5829:1984) |
2021-01-13 |
|
|
EN ISO 5830:2021
(WI=00121830) Resistance spot welding - Male electrode caps (ISO 5830:1984) |
2021-01-13 |
|
|
EN ISO 636:2024
(WI=00121947) Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2024) |
2024-10-02 |
|
|
EN ISO 6520-1:2007
(WI=00121441) Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007) |
2007-07-01 |
|
|
EN ISO 6520-2:2013
(WI=00121650) Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure (ISO 6520-2:2013) |
2013-08-07 |
|
|
EN ISO 669:2016
(WI=00121639) Resistance welding - Resistance welding equipment - Mechanical and electrical requirements (ISO 669:2016) |
2016-03-16 |
|
|
EN ISO 6847:2020
(WI=00121807) Welding consumables - Deposition of a weld metal pad for chemical analysis (ISO 6847:2020) |
2020-09-16 |
|
|
EN ISO 6848:2015
(WI=00121666) Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2015) |
2015-09-09 |
|
|
EN ISO 6947:2019
(WI=00121770) Welding and allied processes - Welding positions (ISO 6947:2019) |
2019-10-30 |
|
|
EN ISO 7285:2021
(WI=00121831) Pneumatic cylinders for mechanized multiple spot welding (ISO 7285:1995) |
2021-01-13 |
|
|
EN ISO 7287:2002
(WI=00121337) Graphical symbols for thermal cutting equipment (ISO 7287:2002) |
2002-02-15 |
|
|
EN ISO 7287:2002/A1:2024
(WI=00121952) Graphical symbols for thermal cutting equipment - Amendment 1 (ISO 7287:2002/Amd 1:2024) |
2024-09-11 |
|
|
EN ISO 7291:2010
(WI=00121521) Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) (ISO 7291:2010) |
2010-11-01 |
|
|
EN ISO 7291:2010/A1:2015
(WI=00121624) Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) (ISO 7291:2010/AMD 1:2015) |
2015-04-22 |
|
|
EN ISO 8167:2021
(WI=00121775) Resistance welding - Embossed projection welding - Projections for resistance welding (ISO 8167:2021) |
2021-07-07 |
|
|
EN ISO 8205:2021
(WI=00121804) Resistance welding equipment - Water-cooled secondary connection cables(ISO 8205:2021) |
2021-04-14 |
|
|
EN ISO 8249:2018
(WI=00121780) Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2018) |
2018-09-19 |
|
|
EN ISO 8430-1:2016
(WI=00121708) Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10 (ISO 8430-1:2016) |
2016-02-10 |
|
|
EN ISO 8430-2:2016
(WI=00121709) Resistance spot welding - Electrode holders - Part 2: Morse taper fixing (ISO 8430-2:2016) |
2016-02-10 |
|
|
EN ISO 8430-3:2016
(WI=00121710) Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust (ISO 8430-3:2016) |
2016-02-10 |
|
|
EN ISO 9012:2023
(WI=00121910) Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests (ISO 9012:2023) |
2023-10-25 |
|
|
EN ISO 9013:2017
(WI=00121630) Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017) |
2017-02-15 |
|
|
EN ISO 9013:2017/A1:2024
(WI=00121954) Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances - Amendment 1 (ISO 9013:2017/Amd 1:2024) |
2024-09-25 |
|
|
EN ISO 9015-1:2011
(WI=00121589) Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001) |
2011-03-02 |
|
|
EN ISO 9015-2:2016
(WI=00121690) Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints (ISO 9015-2:2016) |
2016-02-24 |
|
|
EN ISO 9016:2022
(WI=00121851) Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO 9016:2022) |
2022-04-27 |
|
|
EN ISO 9017:2018
(WI=00121782) Destructive tests on welds in metallic materials - Fracture test (ISO 9017:2017) |
2018-01-31 |
|
|
EN ISO 9018:2015
(WI=00121691) Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints (ISO 9018:2015) |
2015-11-04 |
|
|
EN ISO 9090:2019
(WI=00121767) Gas tightness of equipment for gas welding and allied processes (ISO 9090:2019) |
2019-11-20 |
|
|
EN ISO 9312:2013
(WI=00121596) Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO 9312:2013) |
2013-07-17 |
|
|
EN ISO 9453:2020
(WI=00121809) Soft solder alloys - Chemical compositions and forms (ISO 9453:2020) |
2020-10-07 |
|
|
EN ISO 9454-1:2016
(WI=00121606) Soft soldering fluxes - Classification and requirements - Part 1: Classification, labelling and packaging (ISO 9454-1:2016) |
2016-03-09 |
|
|
EN ISO 9454-2:2020
(WI=00121853) Soft soldering fluxes - Classification and requirements - Part 2: Performance requirements (ISO 9454-2:2020) |
2020-11-04 |
|
|
EN ISO 9455-10:2012
(WI=00121571) Soft soldering fluxes - Test methods - Part 10: Flux efficacy test, solder spread method (ISO 9455-10:2012) |
2012-09-15 |
|
|
EN ISO 9455-11:2017
(WI=00121681) Soft soldering fluxes - Test methods - Part 11: Solubility of flux residues (ISO 9455-11:2017) |
2017-09-20 |
|
|
EN ISO 9455-13:2017
(WI=00121682) Soft soldering fluxes - Test methods - Part 13: Determination of flux spattering (ISO 9455-13:2017) |
2017-09-20 |
|
|
EN ISO 9455-14:2017
(WI=00121720) Soft soldering fluxes - Test methods - Part 14: Assessment of tackiness of flux residues (ISO 9455-14:2017) |
2017-09-20 |
|
|
EN ISO 9455-15:2017
(WI=00121683) Soft soldering fluxes - Test methods - Part 15: Copper corrosion test (ISO 9455-15:2017) |
2017-09-13 |
|
|
EN ISO 9455-16:2019
(WI=00121803) Soft soldering fluxes - Test methods - Part 16: Flux efficacy test, wetting balance method (ISO 9455-16:2019) |
2019-10-16 |
|
|
EN ISO 9455-17:2024
(WI=00121918) Soft soldering fluxes - Test methods - Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues (ISO 9455-17:2024) |
2024-01-17 |
|
|
EN ISO 9455-1:2022
(WI=00121912) Soft soldering fluxes - Test methods - Part 1: Determination of non-volatile matter, gravimetric method (ISO 9455-1:2022) |
2022-12-14 |
|
|
EN ISO 9455-2:1995
(WI=00121202) Soft soldering fluxes - Test methods - Part 2: Determination of non-volatile matter, ebulliometric method (ISO 9455-2:1993) |
1995-09-20 |
|
|
EN ISO 9455-3:2020
(WI=00121778) Soft soldering fluxes - Test methods - Part 3: Determination of acid value, potentiometric and visual titration methods (ISO 9455-3:2019) |
2020-05-13 |
|
|
EN ISO 9455-5:2020
(WI=00121847) Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:2020) |
2020-10-14 |
|
|
EN ISO 9455-6:2022
(WI=00121913) Soft soldering fluxes - Test methods - Part 6: Determination and detection of halide (excluding fluoride) content (ISO 9455-6:2022) |
2022-12-21 |
|
|
EN ISO 9455-9:2020
(WI=00121846) Soft soldering fluxes - Test methods - Part 9: Determination of ammonia content (ISO 9455-9:2020) |
2020-11-04 |
|
|
EN ISO 9539:2010
(WI=00121519) Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:2010) |
2010-01-15 |
|
|
EN ISO 9539:2010/A1:2013
(WI=00121629) Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:2010/AMD 1:2013) |
2013-12-18 |
|
|
EN ISO 9606-1:2017
(WI=00121750) Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
2017-08-23 |
|
|
EN ISO 9606-2:2004
(WI=00121289) Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
2004-12-15 |
|
|
EN ISO 9606-3:1999
(WI=00121176) Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999) |
1999-04-01 |
|
|
EN ISO 9606-4:1999
(WI=00121099) Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999) |
1999-04-01 |
|
|
EN ISO 9606-5:2000
(WI=00121101) Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000) |
2000-02-01 |
|
|
EN ISO 9692-1:2013
(WI=00121651) Welding and allied processes - Types of joint preparation - Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2013) |
2013-09-04 |
|
|
EN ISO 9692-2:2024
(WI=00121943) Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:2024) |
2024-03-13 |
|
|
EN ISO 9692-3:2016
(WI=00121652) Welding and allied processes - Types of joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2016) |
2016-07-20 |
|
|
EN ISO 9692-4:2003
(WI=00121299) Welding and allied processes - Recommendations for joint preparation - Part 4: Clad steels (ISO 9692-4:2003) |
2003-08-15 |
|