Uni Style Fit: A Comprehensive Guide

Style Fit ballpoint refills are available in three colors (black, blue, and red) and 0.5 mm, 0.7 mm, and 1.0 mm tip sizes.

These gel pen refills come in a myriad of colors in three tip sizes: 0.28 mm, 0.38 mm, and 0.5 mm. Like other extra fine tip sizes, the 0.28 mm refills have some feedback (especially on low quality papers). This size is best suited for people who have small handwriting or need to write in small spaces like book margins. The 0.38 mm tip size balances a fine tip with consistent, smooth flow.

• Unscrew the pen body’s grip section from the barrel.
• Locate the circular mounting slots inside the barrel.
• Push the back of a refill into a circular mounting slot until the refill clicks into place.
• Screw the grip section onto the barrel.

Note that if you plan to add multiple mechanical pencil components to a Meister 5 Component Multi Pen Body, the components will get stuck if they are installed next to each other. You can install two mechanical pencil components in the pen body by ensuring that there is a different refill (such as a ballpoint or gel pen refill) placed in the slots between the mechanical pencil components.

• Unscrew the pen body’s grip section from the barrel.
• Locate the tip of the mechanical pencil component. This is the section of the component below the spring. Pull firmly on the tip to remove it.
• Add one or two pieces of lead to the storage tube. Do not add too many pieces of lead, or the pencil component may become jammed.
• Replace the mechanical pencil component’s tip.
• Screw the grip section onto the barrel.

If you are using the mechanical pencil, push down further on the selected tab to extend the lead. For the Meister 5 Component Multi Pen Body, the lead can also be extended by pushing down on the end of the pen body where the eraser is located.