Kremin Inc.

Sometimes you do a review and something changes immediately after creating it - in this case, we had to do an update.... https://lnkd.in/gja8ndS9

The swiss lathes have been one of our most productive pieces of equipment. We have 5 different models and 11 machines total. We thought it would be good to break them all down and talk about each style. This is the first review of the L32 Type XII. https://lnkd.in/gxX_wbxJ

Mist control off of the Swiss lathes can be a hot topic, we have 2 types in our facility - the review below is of the electrostatic type - later we will review a filter based system. Both have their plusses and minuses - tough call on which one is better at this point. https://lnkd.in/gqcqBafa

Most of the topics we discuss in our videos are a result of things we wish we knew or equipment we have been debating about but did not quite have enough information to pull the trigger on. The Keyence is a great example of that. The technology almost looked too good to be true and the form factor coupled with the cost made us pause. Long story short - we should have bought one sooner..... https://lnkd.in/gTJKSsU8

We followed up the Okuma review with our take on the AWR load and Go. This was our first robot load system and we could not be happier with its ease of use and reliability. This was another example of a technology we wanted to try but we did not have a lot of information on so we decided to document it with a review and several tip videos. https://lnkd.in/g5pUCuKB

Our thought process around youtube was to highlight 3 areas. Reviews, demos, and quick tips. The goal was to provide other machining operations (especially smaller ones) more information to make decisions. What we found is when you are looking at new equipment or new technology you are relying on that sales person to give you the best information - it is often difficult to get real life data or results. Our reviews typically get the most interaction. Its important to remember these are just our opinions - there is a lot of loyalty to a brand of machine, much like a sports team. We are open to discussion on anything we post and feel that two way conversation makes the entire industry better. The Multus review below was our first review video. I will talk more about our decision on that machine on a later post. https://lnkd.in/g_YEifQT

Three years ago we started this journey to document what we do and how we do it. The intent was to provide interesting information and learn something from others in the industry. While we are not "influencers" yet, we do enjoy what we have done and want to expand on some of the information we shared and learned from others. Follow along to see what Kremin is about, and feel free to leave your thoughts, opinions, knowledge, tips, and suggestions. https://lnkd.in/gUiS3Q-U