Automation Engineer
Role :- Automation Engineer I
Duration : 7+ Months
Client: TEVA Pharmaceuticals
Location: Davie, FL 33314
Temp to perm: Possibility to extend to perm based on openings and performance.
Shift: 1st Shift Monday - Friday 8:00am – 5:00pm up to 10 additional hours of overtime a week. May be asked to work on the weekends about 20%.
Core Essential Skill Sets
The position will function as a subject matter expert for equipment maintenance, trouble shooting and repair. It supports production maintenance equipment as well as utilities at the Davie site for 24x7 manufacturing operations.
Essential Areas Of Responsibility
Any equivalent combination of education, training and/or experience that fulfills the requirements of the position will be considered.
Education/Certification/Experience
PHYSICAL REQUIREMENTS:
Duration : 7+ Months
Client: TEVA Pharmaceuticals
Location: Davie, FL 33314
Temp to perm: Possibility to extend to perm based on openings and performance.
Shift: 1st Shift Monday - Friday 8:00am – 5:00pm up to 10 additional hours of overtime a week. May be asked to work on the weekends about 20%.
Core Essential Skill Sets
- Minimum 1 year of Automation experience.
- Perform automated equipment troubleshooting.
- Equipment upgrades or modifications to improve efficiency.
- Bachelor’s degree with 5 years’ experience in pharmaceutical or related manufacturing facility or Associate’s Degree with 8 years’ experience within pharmaceutical or related manufacturing facility or equivalent combination of years and experience.
- Basic Background
- Drug -12-panel w/Fentanyl
- Medical Screenings:
- Vision Screen - Near, Far, Color, Depth and Peripheral
- Audiogram & Noise and Hearing Questionnaire
- Spirometry & OSHA Respirator Questionnaire
- Lifting Assessment (35Lbs)
The position will function as a subject matter expert for equipment maintenance, trouble shooting and repair. It supports production maintenance equipment as well as utilities at the Davie site for 24x7 manufacturing operations.
Essential Areas Of Responsibility
- Carries out responsibilities in accordance with the organization’s policies, procedures, and state, federal and local laws.
- Has limited discretion to vary from established procedures
- Has limited work experience involving basic concepts and procedures
- Works under general supervision
- Performs routine assignments in the entry level of the Professional Career Band
- Develops competence by performing structured work assignments
- Uses existing procedures to solve routine or standard problems
- Familiar with PLC programming, automation and AI technologies
- Perform automated equipment troubleshooting.
- Execute planned maintenance and corrective work orders.
- Support to equipment, utilities and process troubleshooting / repairs.
- Responsible for multiple small projects related to new equipment, upgrades to existing equipment, facility modifications, and utility infrastructure.
- Perform technical documents, SOP updates and change controls.
- Provides ongoing support to maintenance staff to solve complex problems, understand and coach failure modes, and prepare technical solutions on facility controls equipment.
- Will implement safe work practices and process controls to ensure a safe operation of equipment and facility. May include job hazard analysis, failure fault trees, and risk assessments to drive a preventable injury work place and continuously safe process.
- Developed financial models to support decision-making and strategic planning.
- Conducted financial analysis, forecasting, and reporting to support business objectives.
- Evaluated business performance and identified opportunities for improvement.
- Provided ad-hoc analytical support for key initiatives, including sales, operations, and capital investment efforts.
- Collaborated with cross-functional teams to develop and implement automatization strategies.
- Created and executed plans to optimize and/or improve scheduling efficiencies to meet business operations onboard.
Any equivalent combination of education, training and/or experience that fulfills the requirements of the position will be considered.
Education/Certification/Experience
- Bachelor’s degree with 5 years’ experience or Associate Degree with 8 years’ experience within pharmaceutical or related manufacturing facility or equivalent combination of years and experience.
- 1-3 years Automation experience.
- Experience on using Computerized Maintenance Management Systems to track the scheduling and execution of maintenance activities.
- PLC experience or certification a plus
- Six Sigma Green Belt a plus.
- Operational Excellence a plus.
- Compliance related documentation a plus
- Project management experience a plus.
- Knowledge and ability to troubleshoot hardware and software used on SCADA systems.
- Reading and ability to interpret blueprints and schematics.
- Communicating clearly and concisely, both orally and in writing.
- Management skills to lead a team of maintenance technicians and meet department goals and expectations.
- Works on assignments that are routine to semi-routine in nature where the ability to recognize deviation from accepted practice is required.
- Exercises judgment within specifically defined practices and policies and selects methods and techniques for obtaining solutions.
- Normally provides general instruction on routine work and detailed instruction on new assignments to direct reports.
- May be asked to recommend methods and procedures for problem resolution.
- N/A
PHYSICAL REQUIREMENTS:
- Standing for extended periods of time at work station or equipment.
- Walking to move short distances quickly and frequently.
- Using fingers to perform activities such as picking, pinching or typing.
- Stooping, Kneeling and/or Crouching – bending body, spine and/or legs.
- Twisting/Reaching – turning at waist and extending hands and/or arms in any direction.
- Sitting for extended periods of time at work station or mobile equipment.
- Climbing – use of feet, legs, hands and/or arms to ascend or descend.
- Crawling – using hands and knees or hands and feet to move about.
- Pushing and/or Pulling – using upper extremities to exert force.
- Grasping – applying pressure to an object with the fingers and palm.
- Repetitive Motions - frequent motions of the wrists, hands and/or fingers.
- Lifting – raising from lower to upper and/or moving objects horizontally – up to 25 lbs., up to 50 lbs. and more than 50 lbs. (with assistance).
- Perform activities such as operating machines (i.e. lathes and drill presses) where the seeing job is at or within arm’s reach.
- Perform activities such as computer work, preparing and analyzing data, extensive reading, and visual inspection involving small defects, small parts and/or operation of machines (including inspection), using measurement devices and/or assembly or fabrication of parts at a distance close to the eyes.
- Operate motor vehicles or heavy equipment.
- Constant exposure to moving mechanical parts and/or moving equipment.
- Frequent exposure to moderate to loud noise levels.
- Frequent exposure to fumes, odors, dusts, mists and/or gasses.
- Frequent exposure to vibrations.
- Occasional exposure to wetness depending on assigned process.
- May be required to wear personal protective equipment (PPE) as needed for assigned process (i.e. safety glasses, respirator, hearing protection, gloves, etc.).
-
Seniority level
Executive -
Employment type
Contract -
Job function
Engineering and Information Technology -
Industries
Pharmaceutical Manufacturing
Referrals increase your chances of interviewing at Mentis Systems by 2x
See who you knowGet notified about new Automation Engineer jobs in Davie, FL.
Sign in to create job alertSimilar jobs
People also viewed
-
Senior Substation Engineer
Senior Substation Engineer
-
Electrical Engineer
Electrical Engineer
-
Electrical Engineer
Electrical Engineer
-
Electrical Engineer - Substation Design
Electrical Engineer - Substation Design
-
Senior Electrical Engineer-Team Leader
Senior Electrical Engineer-Team Leader
-
Electrical Engineer
Electrical Engineer
-
Electrical Design Engineer ( MEP) - Deerfield Beach, FL
Electrical Design Engineer ( MEP) - Deerfield Beach, FL
-
Controls Logic Engineer
Controls Logic Engineer
-
Lead Electrical Field Engineer- Mass Electric
Lead Electrical Field Engineer- Mass Electric
-
Senior Transmission Engineer
Senior Transmission Engineer
Similar Searches
Explore collaborative articles
We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.
Explore More