700 Valve Supply, LLC’s Post

Pump and Valve Parts in Tin Bronze, Nickel Aluminum Bronze, Stainless Steel, Duplex Stainless Steel, Cast Iron and Ductile Iron Material. Parts can be pump casing, volute, impeller, cover, valve body etc...

Pump and Valve Parts in Tin Bronze, Nickel Aluminum Bronze, Stainless Steel, Duplex Stainless Steel, Cast Iron and Ductile Iron Material. Parts can be pump casing, volute, impeller, cover, valve body etc...

Pump and Valve Parts in Tin Bronze, Nickel Aluminum Bronze, Stainless Steel, Duplex Stainless Steel, Cast Iron and Ductile Iron Material. Parts can be pump casing, volute, impeller, cover, valve body etc... #metalcasting

🛠️✨ Avoiding defects while welding copper alloys is crucial for a flawless finish! 🔥💪🔗 Here are some key tips: maintain appropriate heat control, use clean materials, apply proper filler alloys, and ensure meticulous joint preparation. Master the art of flawlessly welding copper alloys! #WeldingTips #CopperAlloys https://olmtl.co/45sUUlz

Checking finished parts, pump casing in Tin Bronze Material, volute in ductile iron Material, valve body in Tin Bronze Material, and covers in Nickel Aluminum Bronze Material #pumps

Checking finished parts, pump casing in Tin Bronze Material, volute in ductile iron Material, valve body in Tin Bronze Material, and covers in Nickel Aluminum Bronze Material #metalcasting

Pump and Valve Parts in Tin Bronze, Nickel Aluminum Bronze, Stainless Steel, Duplex Stainless Steel, Cast Iron and Ductile Iron Material. Parts can be pump casing, volute, impeller, cover, valve body etc... #pumps

Copper-Nickel-Beryllium (C17510) Class 3 Beryllium Copper is heat-treatable with moderate electrical and thermal conductivity and high tensile strength. It is recommended for projection welding dies, flash and butt welding dies, current-carrying members, and heavy-duty offset electrode holders. It is also generally recommended for spot and steam welding steels with high electrical resistance, such as stainless steel.

📢 Cold Chamber Die Casting Cold chamber die casting is the ideal method when working with materials that have a high melting point, like aluminum. Since the high temperature required to melt these materials can damage the pumping system, this procedure is perfect for such metals. This is a high-pressure die casting process that involves pouring the melted material into a cold chamber and then injecting it into the die. The hydraulic system used in a cold chamber process is similar to that used in a hot chamber process. However, a higher pressure of between 2000 and 20000 psi could be necessary.

#Solenoid_valve ⭕️ Types of electric valves for any type of fluid, water, air, steam and chemicals, made of stainless steel, steel and brass in different sizes. Diaphragm, needle, piston, block valves , pneumatic, hydraulic Alloys: brass, aluminum, polyamide, cast iron, Teflon, UPVC and CPVC and Steel304 and Steel316 and PTFE In different sizes, ribbed and flanged