The Lian Li EDGE EG1000 1000W ATX 3.1 PSU Review: Power On The Edge https://trib.al/vfyiRqH
AnandTech’s Post
More Relevant Posts
-
CM18 New design LED Warning Beacon with backup alarm Z-W52S Built-in backup alarm with >100 dB speaker. 9 flash patterns including rotating. Synchronizing capability, mode memory function. ECE R65 R10 approved, IP67 rating.
To view or add a comment, sign in
-
An accurate resettable fuse https://lnkd.in/eWmTphn2 The fuse described in this design idea does not drop the connection, it simply limits the output current. A behavior that is similar to a polyfuse, however the circuit is more accurate...
An accurate resettable fuse
radiolocman.com
To view or add a comment, sign in
-
The third installment of Han Cui's InnoMux-2 design example unboxing video series is now available. This design evaluation board is for a 24 W power supply for PC monitors. It features a 5V CV output and four independently regulated CC outputs for LED strings. An InnoMux2-BL switcher IC allows better than 3% regulation for all outputs without the need for additional DC-DC converters. Download the design example report here - https://okt.to/Tedh37
Design Example Unboxing - DER-715 - 24 W Multi-Output Flyback Power Supply for Monitors Using InnoMux2-BL
To view or add a comment, sign in
-
Increasing the signal trace from 50 ohms to 55 ohms would be a good trade-off for this design. This would help me add a better spacing between signals thus better keeping the crosstalk between traces. For context, The original design used a 50 ohms impedance for a single-ended signal with a 0.35mm trace width to 55 ohms which is 0.3mm. But well other than the USB and Wifi traces, everything pretty much runs at a low frequency so the effect of an increased resistance should be negligible. Design Link https://lnkd.in/gVWsagR4
To view or add a comment, sign in
-
The third installment of Han Cui's InnoMux-2 design example unboxing video series is now available. This design evaluation board is for a 24 W power supply for PC monitors. It features a 5V CV output and four independently regulated CC outputs for LED strings. An InnoMux2-BL switcher IC allows better than 3% regulation for all outputs without the need for additional DC-DC converters. Download the design example report here - https://okt.to/1gNRQS
Design Example Unboxing - DER-715 - 24 W Multi-Output Flyback Power Supply for Monitors Using InnoMux2-BL
To view or add a comment, sign in
-
My custom design L band to IF tunable Downconverter. SPI controlled(1 Hz step), ultra low spur, low IMD, low phase noise...
To view or add a comment, sign in
-
The third installment of Han Cui's InnoMux-2 design example unboxing video series is now available. This design evaluation board is for a 24 W power supply for PC monitors. It features a 5V CV output and four independently regulated CC outputs for LED strings. An InnoMux2-BL switcher IC allows better than 3% regulation for all outputs without the need for additional DC-DC converters. Download the design example report here - https://okt.to/TiPYRN
Design Example Unboxing - DER-715 - 24 W Multi-Output Flyback Power Supply for Monitors Using InnoMux2-BL
To view or add a comment, sign in
4,214 followers