FoundOcean’s Post

⛓ 𝐛𝐚𝐟𝐟𝐥𝐞 𝐛𝐥𝐨𝐜𝐤𝐬 (𝐨𝐫 𝐝𝐞𝐧𝐭𝐚𝐭𝐞𝐝 𝐬𝐢𝐥𝐥𝐬) ◾ Note that #baffle blocks are located near the toe of the #jump and thus are impact elements. Their #effect is to #reduce the necessary tailwater and particularly to shorten the #basin. ◽ In contrast end #blocks are provided to deflect #bottom currents away from the #tailwater #bed. 📽 𝑬𝒏𝒈𝒊𝒏𝒆𝒆𝒓𝒊𝒏𝒈 𝒂𝒏𝒅 𝑨𝒓𝒄𝒉𝒊𝒕𝒆𝒄𝒕𝒖𝒓𝒆 📢 𝐒𝐡𝐚𝐫𝐞 𝐲𝐨𝐮𝐫 𝐭𝐡𝐨𝐮𝐠𝐡𝐭𝐬! ♻ 𝒌𝒏𝒐𝒘𝒍𝒆𝒈𝒆 𝒏𝒐𝒕 𝒔𝒉𝒂𝒓𝒆𝒅 𝒊𝒔 𝒌𝒏𝒐𝒘𝒍𝒆𝒅𝒈𝒆 𝒍𝒐𝒔𝒕. ----------------- 👇👇👇𝑰𝒇 𝒚𝒐𝒖'𝒓𝒆 𝒊𝒏𝒕𝒆𝒓𝒆𝒔𝒕𝒆𝒅 𝒊𝒏 𝒔𝒊𝒎𝒊𝒍𝒂𝒓 𝒑𝒐𝒔𝒕𝒔, 𝒑𝒍𝒆𝒂𝒔𝒆: 🔍 Follow Narges Raeisi 🔔 Click the bell icon on my profile 👍 Like 🔁 Repost --------------- *𝘊𝘰𝘱𝘺𝘳𝘪𝘨𝘩𝘵𝘴 𝘧𝘰𝘳 𝘵𝘩𝘪𝘴 𝘷𝘪𝘥𝘦𝘰 𝘣𝘦𝘭𝘰𝘯𝘨 𝘵𝘰 𝘵𝘩𝘦 𝘳𝘦𝘴𝘱𝘦𝘤𝘵𝘪𝘷𝘦 𝘰𝘸𝘯𝘦𝘳. 𝘍𝘰𝘳 𝘢𝘯𝘺 𝘪𝘯𝘲𝘶𝘪𝘳𝘪𝘦𝘴, 𝘤𝘭𝘢𝘪𝘮𝘴, 𝘰𝘳 𝘳𝘦𝘮𝘰𝘷𝘢𝘭 𝘳𝘦𝘲𝘶𝘦𝘴𝘵𝘴, 𝘱𝘭𝘦𝘢𝘴𝘦 𝘧𝘦𝘦𝘭 𝘧𝘳𝘦𝘦 𝘵𝘰 𝘤𝘰𝘯𝘵𝘢𝘤𝘵 𝘮𝘦.

Exquisite Chromium-rich petrified wood with chalcedony :)

We measure how much sand and dirt our mats can capture! Quality differences between walk-off entrance mats are difficult to see. Nevertheless, at Rinos we know exactly how much sand and dirt each type of mat captures. Sand and dirt that would otherwise have entered the building. How do we know this? By testing mat performance! One of the most important criteria is the degree of sand absorption. In principle, an entrance mat that is cleaned regularly can scrape off as much as two kilos of sand per square metre, before the mat is completely saturated (coir mats up to 6 kilos). We divide sand absorption scores into 3 performance categories. The best performance? 90% or more of that amount can be scraped off!  https://lnkd.in/eqQ8Fv6n Follow us now and stay informed! #rinos #supportingtheperfectentrance #sandabsorption #entrancematting #performance

Friday Forest Fact! Ever wonder how to tell the difference between firs and pines out in the forest? Look at their branches! 🌲 Pine needles are usually longer and grow in bundles, also called fascicles. They are flexible and often have a more slender appearance. Fir needles are typically shorter and grow individually from branches. They are often flat and have a more stiff, needle-like texture. Also, pine cones have a more elongated shape and may remain on the tree for several years before falling. They generally point downward on the tree. Meanwhile, fir cones usually stand upright on the branches, with a more cylindrical shape. 

Cross-hatching (ea, operating the grinder in a North to South then East to West grid pattern) is always recommended when changing grits and performing more than one pass per grit. Cross-hatching provides more consistent refinement across the surface and helps avoid visible lines in the floor, sometimes called “cornrows". In addition to cross-hatching, using a diagonal pattern to create a third cutting angle can improve the refinement process. #Scanmaskin #surfaceprep #FloorPreparation #ConcreteGrinding #ConcretePolishing #ConcreteRefinement #GrindingTips #SurfaceRefinement #grinder #concrete

https://ow.ly/OlMW50TrOxi Before applying HyperTone Stains on maple, proper preparation is essential. Sand the floor, clean it thoroughly, and consider water-popping to open the wood’s pores for improved stain absorption. #woodfloor #prep #stains

Jarrah burl and resin bowl, using the wonderful Let's Resin Making of video can be seen here: https://lnkd.in/ezTieyhe

Let's discuss how to set up your personal sand tray area, including where everything should go and the best way to set it up for your clients. #sandtray #sandtraysetup

Let's discuss how to set up your personal sand tray area, including where everything should go and the best way to set it up for your clients. #sandtray #sandtraysetup

Hardwood Hints: How To Know if Your Miter Saw Is Cutting True Read more and watch the video>> https://lnkd.in/giFyTsxB