Thermoplastic Fusion Technology Group’s Post

How to produce PPR pipe?

RESULTS // after CompressionFit which replaced a failing cast iron water transmission main. The premise behind the technology is the HDPE pipe forms a tight compression fit within the host pipe. --------> The tight compression fit maximizes final Internal Diameter of the new system, typically increasing flow vs. old system (due to new c-factor of 150 of HDPE pipe). #pipelining

CompressionFit 101 🔘 The new HDPE pipe is slightly larger than the inside diameter of the host pipe to be replaced. 🔘 Generally the HDPE pipe is reduced between 6% to 12% as it is pulled through the reduction die. The exact reduction is calculated based on project specifics. This reduction allows the clearance for the HDPE pipe to be pulled through the host pipe. #CompressionFit

Discover the expectational strength and durability of Spectra Pipes. These lead-free pipes are not only built to last; they are also corrosion resistance and UV resistance. Spectra Piping Solutions ensures quality you can rely on for decades to come. #spectrapipes #cpvcpipes #upvcpipes #swrpipes #qualitypipes #durablepipes #plumbing #plumbinglife #plumbingsolutions #uvresistantpipes

RESULTS // after the HDPE pipe is installed by CompressionFit, the pipe will start to naturally revert after tension is released. The new HDPE pipe will revert until it is halted by the ID of the failing host pipe forming a tight compression fit. Note: the ends of the failing host pipe were slightly flared #trenchless

12” HDPE pipe advances during the pull back process using pre-chlorinated pipe bursting to replace 12” cast iron water main. Size on size and one upsize replacement are considered industry standards and the most common types of projects. #pipebursting

Pipe Bursting Q&A: How do you move the HDPE pipe from the staging yard to the pipe bursting location, especially around intersections? A: ⬇️ Moving HDPE pipe through and around intersections is a non-issue due to the pipe materials flexibility and toughness. #HDPEpipe

Sometimes breaking things helps you with the solution that #NeverCracksUnderPressure. #APLApollo #ApolloPipes #CPVC #CPVCPipes #ApolloCPVCPipes #PipingSystems #Pipes #MadeForLife #PipesAndFittings #PlumbingSystem #PlumbingSolutions

Dewatering Multi Disc Screw Press (MDS)

Slagging and fouling can make the life of the PF boiler O&M personnel really difficult at times. This often leads to saturation of ID Fan capacity and creates a highly unsafe condition in the furnace. Here is an Article on this topic by Mr. Ansuman Sensharma I invite all to share their experience in this regard.   # Slagging # FoulinginBoiler # CoalFiredBoiler #engineeringsolutions #indiaboilerdotcom #engineeringsolutions #failureanalysis #furnaceexplosion #clinker