See our #Gericke Double Shaft Mixer GMS in action!
The two shafts create an optimal zone of fluidity in the center, which allows for perfect homogeneity to be achieved in a very short amount of time.
Visit www.gerickegroup.com to find out more.
#batchmixer#powderprocessing
ONE UNIT FOR MANY PROFILES
The DREISTERN double roll forming machine DPMflex are characterized by the fact that a large number of different profile variants can be produced on one unit. Motor driven adjusting axes allow continuously variable setting of the desired profile geometry with respect to width, height and the material thickness of the profile in the shortest possible time.
See more : https://lnkd.in/d9q95hWp#dreistern#formingsuccesstogether#rollforming
What is a Spline Shaft?
The term “splined shaft” combines two terms: “spline,” which refers to grooves or ridges designed to fit into corresponding grooves on a mating part, and “shaft,” a cylindrical component that transmits power and rotational motion from one machine element to another.
Functions of Splined Shafts
1. Torque Transmission
2. Alignment and Positioning
3. Load Distribution
During check alignment between motor and Flender gearbox by Easy-Laser xt-660.
in Easy turn mode.
Where there are some errors as no extension rods to fix the bracket in the shaft.
but I show how we can use laser alignment.
Also I see the magentic base not give reliabile readings.
After that We make suitable extension rods and take the alignment readings again where the bracket of laser alignment mounting in both hubs of coupling. as shown in video in first comment.
Komax Tape Processing
The Komax Rotar 500
The Rotar 500 Series taping machines process wire harnesses of the highest complexity, such as wire harnesses in the vehicle door, mirror wiring, or battery harnesses.
The visualization of the process steps makes production much easier. The unrestricted positioning of the linear system contributes to the flexibility: Individual positions can be selected as required. There is also the option of equipping the linear system with up to two clamps. This allows plugs to be positioned ideally in relation to each other – without any manual effort. Furthermore, the Rotar 500 series meets the highest safety requirements and reduces downtime.
CEO and Solutions Planner at LAKIDIS FOOD PROCESSING MACHINERY at LAKIDIS SA
3wExcellent work