Popping holes in pipe is a breeze with the NEW permanent magnet HMD904 mag drill. The rare earth magnet grips tight to the steel and the Hougen "12,000-Series" cutter tears holes through the sides of pipes, like a wolverine at dinner time. Made in the USA. PN: 0904122 https://lnkd.in/ecq_7-V #pipeline #timesaver #magnet #madeintheusa #safety #flexibility
Hougen Manufacturing, Inc’s Post
More Relevant Posts
-
Conquer the Cold with KOPR EXT FF 1.0 Arctic! ❄️ This enhanced copper-based compound is your go-to solution for braving the harshest arctic temperatures. KOPR EXT FF 1.0 Arctic is equipped with a low coefficient of friction designed for use where rig tong and/or iron roughneck units lack the torque capacity to reach the optimum engagement of higher torque connections. Its solids package prevents wear and galling under compressive forces, making it an excellent choice for your drilling projects. Why choose KOPR EXT FF 1.0 Arctic? ✔️Powerful adhesion with improved extreme pressure and antiwear properties ✔️Superior resistance to rust and corrosion in the presence of invert or high-pH mud ✔️Excellent resistance to water wash-off ✔️Wide temperature range to excel in arctic temperatures ✔️Friction factor 1.0 for optimum engagement Don't let cold conditions compromise performance, learn more ➡️ https://bit.ly/3tFKEJ6 #JetLube #OilandGas #Drilling #ArcticChallenge #KOPREXTFF
To view or add a comment, sign in
-
X-Joint Pipe Full Model with Warped Surface Flaw at Welded Joint total deformation closed view
To view or add a comment, sign in
-
X-Joint Pipe Full Model with Warped Surface Flaw at Welded Joint total deformation
To view or add a comment, sign in
-
When using screws in thin or narrow wood, or near edges, drill pilot holes. This makes it easier for the wood to accept the screw without splitting or breaking because of expansion.
To view or add a comment, sign in
-
When using screws in thin or narrow wood, or near edges, drill pilot holes. This makes it easier for the wood to accept the screw without splitting or breaking because of expansion.
To view or add a comment, sign in
-
Drill Tail Screw SIZE:12x20mm、12x30mm、12x40mm、4.2x32mm、4.2x38mm... There are 14 specifications.
To view or add a comment, sign in
-
𝗗𝗬𝗞 𝘄𝗲 𝗺𝗮𝗻𝘂𝗳𝗮𝗰𝘁𝘂𝗿𝗲 𝗥𝗼𝗽𝗲𝘀 𝘄𝗶𝘁𝗵 𝗰𝘂𝘀𝘁𝗼𝗺 𝗲𝘅𝘁𝗿𝘂𝗱𝗲𝗱 𝗷𝗮𝗰𝗸𝗲𝘁𝘀? For more than 30 years we've extruded over all our higher performance fibers (HMPE, PET, LCP, Aramids and more) and can extrude custom profiles and shapes to reduce strum and drag. The smooth jacket made from any number of materials (PU, PP, PE, PET, etc.) provides durability, is non-corrosive and non-metallic, and completely protects the rope from damage and elements such as UV, water, dust, and sand. Common applications: vessel lifelines, subsea anchoring, fish bite protected buoy mooring systems, coring lines, guy wires, standing rigging, towed arrays, aerostat tethers, and more. Learn more: https://lnkd.in/d82TZevS #extruded_synthetic_rope #lifelines #guywires #mooring #coring_lines #extrudedrope #towed_arrays #aerostat_tethers
To view or add a comment, sign in
-
The horizontal directional drill reamer could work with trencher of Ditch Witch, Vermeer, XCMG, etc , the thread connection could be produced to NC, FH, IF, REG, FS, ... to be connected with various of drill pipes. Main parameter of drill reamer, all below parameters could be customized: 1>Shaft OD and length; 2>Thread connection; 3>Diameter of reamer; 4>Diameter of stabilizer; 5>Type&Qty of roller cone cutters.
To view or add a comment, sign in
2,103 followers
Regional Manager at Industrial Magnetics, Inc.
3moLove that permanent magnet base!