IDI Composites International’s Post

IDI’s Fortium™ is a series of composite materials reinforced with 40% - 65% discontinuous glass fiber. This high level of reinforcement imparts high strength and impact resistance to these materials. https://lnkd.in/g_kpV-zb

🧲Your projects with our range of Permanent Powerful Neodymium Magnets, designed to provide exceptional strength and reliability. Choose from a variety of coatings including Ni, Zn, Epoxy, Parylene, Gold, and Passivated options to suit your specific requirements. 🔩 Customizable Shapes: Whether you need a Block, Bar, Cube, or any other form from our extensive shape list, we've got you covered. 📏 Consistent Density: Enjoy the performance benefits of our magnets' consistent density of 7.5-7.6 g/cm³, ensuring stability and power. ⏰ Rapid Delivery: We understand the value of time—common samples are delivered in just 5-7 days, with mass production taking 10-15 days. 🌡️ Grades for All Temperatures: With magnetic grades ranging from N35 to 33AH and working temperatures up to 220℃ (428°F), our magnets are built to perform in diverse environments. #TaiXiongMagnets #NeodymiumPower #CustomizableMagnetSolutions #IndustrialStrength #MagneticInnovation

How to seperate strong NdFeB Magnet? Neodymium magnets are exceptionally strong. If you’ve never handled them before, you will probably be surprised by how powerful these magnets can be. This is because neodymium magnets are the strongest type of permanent magnet in the world. In fact, they are far stronger than all other ceramic or alnico magnets of equal size – with a magnetic energy value as much as 18 times greater than these other magnets by volume and 12 times greater by mass. If you are going to be using strong magnets - the fastest, safest and easiest way to separate them is to use a splitter/separator tool. A magnet splitter/separator is typically made of wood, plastic or another nonferrous material. It works similar to a pez dispenser or guillotine. When you pull the blade lever down toward the base, it provides the leverage needed to separate strong magnets by applying downward pressure to slide them apart, one by one. #magnet #ndfeb #ndfebmagnet #neodymium #neodymiummagnet #magnetseperator #splitter #separator

Introducing the latest press innovation: the MegaPress 1/2" to 2" Zero Lead Bronze Transition Coupling. The first and only press coupling that allows you to seamlessly transition between Iron Pipe Sizes (IPS) and IPS, or IPS to Copper Tube Sizes (CTS) in seconds. 🔥 With an EPDM sealing element, the MegaPress IPS to CTS coupling facilitates transitions between IPS and CTS piping systems, reducing corrosion. Paired with the Viega PureFlow x ProPress fitting, this coupling allows for easy IPS to PureFlow PEX transitions. The MegaPress IPS to IPS coupling, available with EPDM and FKM sealing elements, enables quick transitions between dissimilar metals like carbon steel and stainless steel, and galvanized steel and stainless steel. Even better, you can make all of these connections with the same tool. Coming this fall. Learn more here: https://bit.ly/3Apn8Tv #Viega #ViegaPress #MegaPress #Innovation #Plumbing

Modification of the open-cell foams using Sr was challenging due to the low cooling rates in block mold casting. In our DFG project, we successfully modified Al-7Si-Mg and Al-10Si-Mg alloys using Strontium. Introducing 400 ppm Sr improved the energy absorption properties and led to a uniform deformation of the foams. The paper is now online and has been published as open-access in the Journal of Alloys and Compounds (Q1). I acknowledge my co-authors for their contributions throughout the project. #modification #Aluminumfoams #investmentcasting #Strontium

Which circuit boards do we handle? (57) F4BTM High Frequency PCB. Wangling's F4BTM series laminates consist of fiberglass cloth, nano-ceramic fillers, and PTFE resin, and go through strict pressing procedures. They are based on the F4BM dielectric layer, with the addition of high dielectric and low loss nano-level ceramics, thereby achieving a higher dielectric constant, enhanced heat resistance, a lower thermal expansion coefficient, higher insulation resistance, and better thermal conductivity, while maintaining the characteristic of low loss. F4BTM and F4BTME have the same dielectric layer but utilize different copper foils: F4BTM is combined with ED copper foil, while F4BTME is paired with reverse-treated (RTF) copper foil, providing excellent PIM performance, more precise line control, and lower conductor loss.

✍ AdTech #DeepBedBox filter effects： For particles larger than 10 microns, the filtration effect is over 95%。 ✍ AdTech Deep Bed Box filter volume: Universally applicable to all aluminum alloys (Mg≥1% alloy reduces by 20-30%), depending on equipment specifications and filter media Laying methods and sizes vary: 🧚♀️ 1. The flow rate range of the fine filtration method for impurities with a diameter of less than 10 μm is: 1000-10000T; 🧚♀️ 2. The flow rate range of coarse filtration for impurities with a diameter of 10μm or above is: 2000-15000T 📞 WhatsAPP:+8618539568897 📩 Email:adtech1@adtechamm.com #manufacturing #equipment #aluminium #metals #industrial #sustainability #aluminumcasting #aluminiumingot #aluminiumprice #lowcarbonaluminium #aluminiummarket #aluminiumproduction #aluminiumtrain #aluminiumcoaches #aluminiumnews #aluminiumproduction #aluminiumsheets #profil  #aluminiumprofiles  #Billet #aluminumsheets #aluminumfoils #aluminumcoils #chinaaluminum

Revolutionise Your Industry with Advanced Melt Spinning Technology Melt spinning is a rapid solidification process that transforms molten metal into thin, flexible ribbons with exceptional properties. This technique ensures superior uniformity and micro-structure control, making it ideal for producing both amorphous and micro-crystalline metallic ribbons. These advanced materials are pivotal in various high-tech industries. Visit the website for more information 👉https://lnkd.in/eA-amTuA #MeltSpinner #AdvancedMaterials #AdvancedManufacturing #ExceptionalProperties #MagneticMaterials #Amorphous #Microstructure #SuperiorQuality

🧲Attraction Guaranteed! 🧲 Introducing the newest members to the RMT flat magnet family. Please welcome the innovative RMT-T, RMT-R, and RMT-NK magnets. The RMT-T and RMT-NK are designed with a practical handle for easy use. Perfect for holding drawings, documents, and similar items on any metal surface, these magnets boast a high adhesive force thanks to their neodymium-iron-boron (NdFeB) composition, and are effective up to 80°C or 176°F. For added convenience, the RMT-T version with an eyelet and retaining chain ensures you never lose your magnet. Both versions are housed in nickel-plated steel, featuring a no-slip coating of thermoplastic elastomer (TPE) to enhance friction and prevent surface damage. With a hardness of 80 shore A. Their adaptability ensures they can handle a variety of tasks with ease and efficiency. Learn more about how these powerful and versatile magnets can benefit your projects. 🔗 https://bit.ly/NEW_MAGNETS #Elesa #Innovation #MagnetTechnology #Organization #EngineeringSolutions

WL-CT338 High Frequency PCB WL-CT series laminates are high-frequency materials that combine hydrocarbon resin, ceramic, and glass fiber cloth in a thermosetting resin system, providing low loss performance and meeting high-frequency design requirements. The combination of hydrocarbon resin and composite ceramics in this series results in low loss, high temperature resistance, temperature stability, stable dielectric constant, low thermal expansion coefficient, and a high TG value exceeding 280℃.