Juniper Systems’ Post

[Lunch & Learn🦺] X-PAD Tutorials: Survey X-TILT Learn how to configure your GNSS or TPS settings when using a tilt pole. Watch the video https://loom.ly/l26Pays #GNSS #TPS #XPADUltimate #XPAD365 #Tutorials #GeoMax

Dive into the world of Post-Processed Kinematic (PPK) with our latest tutorial! PPK offers the flexibility of post-processing GNSS data for precise positioning without the need for real-time corrections, making it perfect for remote areas. https://lnkd.in/dci8e6bC #PPK #GNSS #GeospatialTutorial

The user experience is of great importance when deciding to invest in the best GNSS solution. Modern surveying equipment represents a significant investment. Leica Geosystems GNSS solutions come with Leica Captivate field software to ensure the time spent on-site is efficient. More to read here: https://lnkd.in/ddT3RKHV #LeicaGeosystems #whenithastoberight #GrowYourBusiness #LeicaGS16 #GNSS #PureSurveying

If our base is moved, re-erected or restarted at an unknown point in our survey project, we need to use the base shift function to help calibrate all collected data in our survey project. In this video, our Product Manager Rachel explains 4 ways to shift GNSS Base to directly change the base and easily complete your measurement work! Learn more:https://bit.ly/458n4RF #gnss #rtk #chcnav #dji

Setting up a Base Station Over a Known Point https://lnkd.in/gS9vPdDt When conducting RTK or PPK field surveys, we establish a base station with an Emlid Reach GNSS receiver. In this video we explain how we: 1) Locate a Permanent Survey Mark (PSM) 2) Setup our base station (Emlid Reach GNSS receiver) above the PSM 3) Configure the RS2 with the coordinates of the PSM and set the base station to transmit corrections via LoRA radio. #surveying #emlid

Setting up a Base Station Over a Known Point https://lnkd.in/gS9vPdDt When conducting RTK or PPK field surveys, we establish a base station with an Emlid Reach GNSS receiver. In this video we explain how we: 1) Locate a Permanent Survey Mark (PSM) 2) Setup our base station (Emlid Reach GNSS receiver) above the PSM 3) Configure the RS2 with the coordinates of the PSM and set the base station to transmit corrections via LoRA radio. #surveying #emlid

Setting up the Bad Elf, LLC Flex GNSS receiver with GEODNET to achieve 1cm accuracy in your surveys! Watch how easy it is to integrate #GNSS corrections using GEODNET #RTK service. #DePIN

💡#SingularXYZ Weekly Technical Time💡Test Report | Sfaira ONE Performance in Different Environments Discover how the Sfaira ONE Series GNSS receivers excels in various environments, from open areas to heavily obstructed zones. Our detailed test report, based on data from our partner Dr. Kilpelä, highlights its accuracy and tilt compensation capabilities. Learn about its reliable performance and suitability for diverse surveying applications. Read the test report👉 https://lnkd.in/ggCg4d6c #surveyor #surveying #SingularXYZ #surveyinglife #RTK #GNSS #GPS #geospatial #surveyorlife #blog #techblog #testreport

Featured Product: GNSSource-1000 The GNSSource-1000 is a low-cost, high-performance GPS/GNSS primary reference source. It integrates a GPS/GNSS disciplinable low-noise GXClock-500 function, using SmarTiming+R technology with an auto-adaptive loop time constant from 100 to 10,000 seconds, depending on the GPS/GNSS signal quality, at cutting-edge 1ns resolution. The Safran GNSSource-1000 is specifically designed for cross-industry applications, where high stability and timekeeping features are required. #ResilientPNT #PNT #Timing

ASW 3.41 is out now. It is the new version of Apglos B.V. Survey Wizard. There are minor changes compared to ASW 3.40. Apglos Survey Wizard is together with a #GNSS receiver of Emlid , JAVAD GNSS , Pronivo, Toknav GNSS or any other brand a great tool to start #landsurveying