Kirby-Smith Machinery, Inc.’s Post

ATQ27 320uH LK:3.3uH Max Core material: PC96 Process: primary sandwich winding, not cut Inner 2 sets of shielded windings Outer cross shielding copper foil

M14 #threaded mounted alumina oxide #flap #wheel suited for internal bore arc and curved surface grinding 115*20*M14 115*30*M14 125*20*M14 Grit from #40 to #320

Test Content: Turn high“on" and turm low "off" to test the limit performance of the wire until it breaks. Comparison of wire limit time. Tests Condition Setting : Workpiece: DC53 ; Thickness: 50mm SC: 20; OV: 6=100V; DA: A20; ON: 8.000; OF: 7.000; AN: 6.000; AF: 7.000; SN:6.000; SF: 8.000; SV: 43; FR: 8; WS: 7; WT: 7; WP: 6; FM: 0; FF: 1.00 #EDMwire #WEDM #Wirecutmachine #Kmway #PFcut

Can strengthening change the mode of failure? Yes, we used Post- Tensioned Metal Straps (PTMS) to change the shear (sudden) failure in an RC beam without shear reinforcement to bending (ductile) failure. The video (x30) shows the beam. Details of the work: https://lnkd.in/g3hwrdbs

Square holes grid on SS304 (100 micron thickness sheet) using 300 micron endmill

These holes are precise enough to meet your requirements.

ZP275 Rotary table with inserts. Model:zp275; opening diameter:698.5mm; Rated static load: 4500kn; Maximum operating torque – 27.5 kN.m; Maximum turnover – 300 r/min; Overall Dimension(mm):2380mm×1680mm×685mm; weight:6930kg

Quickly change the knives for our corner crimping machine CCM160? Yes you can. See Mike guide you how to fulfill this. #windowmachine #Aluminiumwindows #fenstek #cornercrimpingmachine #ccm160

AtlasLdr Reflective x64 PE/DLL Loader implemented using Dynamic Indirect Syscalls https://lnkd.in/eWRnrNmy

BSP EXPANSION JOINT https://buff.ly/3VNmWmd Surface of the waveform compensating element is rubber, and the inner layer is a sandwich reinforced with several layers of strong fiber or steel tape (wire). #rubberbellows #rubberexpansionjoint #expansionjointsystems