Blasting in Gazestan iron mine , Yazd province, iran
Meysam Maghsoudi’s Post
More Relevant Posts
-
Look how much balled up is the bit! This usually happens when you are drilling the upper section of the hole(top hole)with a high penetration rate. Aghajary formation which is the 1st formation to be drilled in south western Iran,is consisted of sand stone and sticky marl and as a result of that,this phenomenon is seen a lot. What are the measurements you take to prevent this and what is your remedial suggestions?
-
Why choose a rock drill and splitter? If you use a carbon dioxide stick, there will be some danger. Secondly, you need to drill a hole first. You need a drill that can drill such a large hole to put the carbon dioxide stick in. Gas blasting is always dangerous, just like explosives. The use of explosives will produce a lot of dust and have an impact on the environment. However, if you want to choose a method of blasting rocks without explosives, the most efficient one is to choose our rock drill. Our rock drill and splitter are integrated. The drill and splitter are integrated to reduce a lot of trouble. The drill only needs to drill for 1 minute, and our splitter starts splitting. The cracked hard rock can be disintegrated with a breaker, which greatly speeds up the process. 500 cubic meters of stone can be hit in 8 hours a day. www.chnlykj.com #rockexcavation #construction #brokenrock #rockbreaker #drilling #Indonesian #Vietnam #India #MiddleEast #Africa #Drillingandsplittingintegratedmachine #rocksplitting #quarrying #mine #mining #Russia #China #Russia #Dubai #America #Africa #Export #rockmining
