Mohd Ridzuan Buang’s Post

Here are some key "do's and don'ts" for crane lifting activities:- Do's:- 1. Inspect Equipment: Always inspect the crane and rigging equipment before use to ensure it's in good condition. 2. Plan Ahead: Plan the lift thoroughly, considering factors like weight, distance, and potential obstacles. 3. Use Qualified Operators: Only allow trained and certified operators to operate the crane. 4. Communicate Clearly: Maintain clear communication between the crane operator and the ground personnel using hand signals or radios. 5. Secure the Load: Ensure the load is properly rigged and secure before lifting. 6. Observe Weather Conditions: Monitor weather conditions and avoid lifting in strong winds, storms, or other adverse weather conditions. Don'ts: 1. Overload the Crane: Never exceed the crane's rated capacity. 2. Ignore Safety Procedures: Don't skip safety procedures or take shortcuts during setup or operation. 3. Operate in Unsafe Conditions: Avoid operating the crane in unstable or hazardous conditions. 4. Forget Ground Stability: Ensure the ground where the crane is placed is stable and can support the crane's weight. 5. Neglect Maintenance: Don't neglect regular maintenance of the crane and rigging equipment. 6. Rush the Process: Avoid rushing the lifting process; take the time to ensure everything is done safely and correctly. Following these guidelines helps ensure the safety and efficiency of crane lifting operations. #cranesafety #liftingoperations #constructionsafety #safetyprofessionals #safetyfirst #hseprofessionals #hseengineers

Immediate Causes of Crane Swing Load Failure: ⚠️ Overloading the crane beyond its capacity. ⚠️ Improper load rigging or securing. ⚠️ Sudden or jerky movements of the crane. ⚠️ Failure to follow proper lifting procedures. ⚠️ Inadequate training or supervision of crane operators. ⚠️ Mechanical failure of crane components. Root Causes of Crane Swing Load Failure: 🔍 Lack of maintenance leading to equipment malfunction. 🔍 Poor communication between crane operator and ground personnel. 🔍 Inadequate risk assessment and planning before lifting operations. 🔍 Insufficient safety protocols or procedures in place. 🔍 Failure to address environmental factors such as wind or uneven ground. 🔍 Organizational culture that prioritizes speed over safety. Corrective Actions to Avoid Future Incidents: 🛠️ Implement regular maintenance schedules for cranes. 🛠️ Establish clear communication protocols between the crane operator and the ground team. 🛠️ Conduct thorough risk assessments before lifting operations. 🛠️ Enhance safety protocols and ensure compliance. 🛠️ Monitor and account for environmental factors during lifting. 🛠️ Foster a safety-first culture with comprehensive training and awareness programs. #Overloading #ImproperRigging #SuddenMovements #ImproperProcedures #InadequateTraining #MechanicalFailure #LackOfMaintenance #PoorCommunication #InadequateRiskAssessment #InsufficientSafetyProtocols #EnvironmentalFactors #SafetyCulture #MaintenanceSchedules #ClearCommunication #ThoroughRiskAssessment #EnhancedSafetyProtocols #EnvironmentalMonitoring #SafetyCultureDevelopment

To operate an EOT crane, skills are required, and along with that, we need to exercise caution while operating it, and there are some protocols related to it that must be followed. EOT cranes are used to lift heavy loads, and if not used correctly, it can lead to serious issues. Keeping these things in mind, safety precautions tips have been given. -> Training and certification:- Operators should be trained in operating EOT cranes, handling related issues, and ensuring that they can deal with any problem. They should be familiar with safety features. They should be certified professionals. -> Pre-operation inspection: There should be an inspection of anything related to the crane, checking if anything is broken or damaged, before the crane starts. -> Load capacity: Every crane has its own loading capacity, and you should never load more than its capacity, as it can lead to the risk of load imbalance. -> Proper rigging: It is essential to ensure that the rigging equipment for lifting any load by the crane is functioning correctly so that you can focus on safety by using the right technique. -> Clear communication: There should be proper communication among the workers, especially while working, whether they are operating a radio remote control or using any other equipment. -> Avoid overloading: Never overload the crane with a load or any object that has an awkward shape and can disrupt the balance. -> Slow and controlled movement: If we need to make any sudden changes in our work, we need to slow down the crane's movement to control sudden ups and downs. -> Emergency stop: Crane operators should know how to use the emergency stop button during emergencies or in case of any malfunction in any part of the crane. -> Observe surroundings: In the area around the crane, we should pay attention to ensure that there are no obstacles or any other items that could create hindrances. Caution should be exercised in such matters. We all know that due to these safety features, we can stay safe and avoid accidents or injuries. We all want a good safe environment in our work area, in our surroundings, so it is essential to follow safety protocols for heavy machines like cranes. #SafetyFirst #WorkplaceSafety #SafetyAwareness #SafetyAtWork #SafeWorkEnvironment #SafetyTraining #SafetyStandards

A must for all crane owners

To operate an EOT crane, skills are required, and along with that, we need to exercise caution while operating it, and there are some protocols related to it that must be followed. EOT cranes are used to lift heavy loads, and if not used correctly, it can lead to serious issues. Keeping these things in mind, safety precautions tips have been given. -> Training and certification:- Operators should be trained in operating EOT cranes, handling related issues, and ensuring that they can deal with any problem. They should be familiar with safety features. They should be certified professionals. -> Pre-operation inspection: There should be an inspection of anything related to the crane, checking if anything is broken or damaged, before the crane starts. -> Load capacity: Every crane has its own loading capacity, and you should never load more than its capacity, as it can lead to the risk of load imbalance. -> Proper rigging: It is essential to ensure that the rigging equipment for lifting any load by the crane is functioning correctly so that you can focus on safety by using the right technique. -> Clear communication: There should be proper communication among the workers, especially while working, whether they are operating a radio remote control or using any other equipment. -> Avoid overloading: Never overload the crane with a load or any object that has an awkward shape and can disrupt the balance. -> Slow and controlled movement: If we need to make any sudden changes in our work, we need to slow down the crane's movement to control sudden ups and downs. -> Emergency stop: Crane operators should know how to use the emergency stop button during emergencies or in case of any malfunction in any part of the crane. -> Observe surroundings: In the area around the crane, we should pay attention to ensure that there are no obstacles or any other items that could create hindrances. Caution should be exercised in such matters. We all know that due to these safety features, we can stay safe and avoid accidents or injuries. We all want a good safe environment in our work area, in our surroundings, so it is essential to follow safety protocols for heavy machines like cranes. #SafetyFirst #WorkplaceSafety #SafetyAwareness #SafetyAtWork #SafeWorkEnvironment #SafetyTraining #SafetyStandards

Crane inspection is a vital part of crane safety. It involves regular checks of the crane's components, such as the hoist, controls, ropes, and structural integrity. Inspections should be performed by qualified personnel according to regulatory standards and manufacturer recommendations. Regular inspections help identify potential issues early, preventing accidents and ensuring the crane's proper functioning. Given link below help you how to inspection crane inspection #cranesafety #carneinspection #safetyfirst https://lnkd.in/d-gRTwpk

The reason why a long, continuous press is used to activate the emergency stop button on cranes is to increase the safety level and ensure immediate stopping in emergency situations. When the emergency button is pressed continuously and for a long time, the chance of accidental or incorrect operation is reduced, as it becomes more difficult to activate the button by mistake. This means that in the event of an emergency, the button is activated deliberately and clearly, ensuring that the crane stops immediately without any delay, thus increasing the safety of the operator and the surrounding environment.

Why did this crane fail? 🔹️Incorrect lifting procedures 🔹️Exceeding the Safe Working Load (SWL) 🔹️absence of SLI 🔹️Shifting of the Center of Gravity (CG) due to crane movement 🔹️Incompetent crane operators 🔹️Failure to conduct a risk assessment 🔹️Overconfidence 🔹️Time pressure 🔹️Unstable ground conditions 🔹️Inadequate lifting plan or judgment 🔹️and many more right in comment👇 #varalpost #hseengineer #HSEEngineer#viralpage#HSE#safetyfirst#safety#SafeEnvironment#safetyawareness#tbt

𝐒𝐚𝐟𝐞𝐭𝐲 𝐓𝐨𝐩𝐢𝐜: 𝐂𝐫𝐚𝐧𝐞 𝐚𝐧𝐝 𝐋𝐢𝐟𝐭𝐢𝐧𝐠 𝐎𝐩𝐞𝐫𝐚𝐭𝐢𝐨𝐧𝐬 Crane and lifting operations involve significant risks if not conducted properly. Prior to any lifting activity, ensure that the crane and all lifting equipment are inspected for defects or damage. Operators must be properly trained and certified to handle the equipment. It's critical to assess the load, ensuring it does not exceed the crane's capacity, and the load should be properly secured before lifting. Clear communication between the operator and ground personnel is essential, using standardized signals or communication systems. Always keep the area clear of unauthorized personnel during lifting operations to avoid accidents. Proper planning and adherence to safety protocols can prevent serious incidents in crane operations.

KEY POINTS TO NOTE DURING LIFTING OPERATIONS. Load Capacity: Ensure that the crane's load capacity is well within the specified limits for the particular lift. Exceeding the crane's capacity can lead to structural failure and accidents. #safetyfirst Ground Conditions: Assess the ground conditions where the crane will be set up. The ground should be stable, level, and capable of supporting the crane and the load. Soft or uneven ground can lead to stability issues. Weather Conditions: Consider weather conditions such as wind speed, precipitation, and lightning. Operating a crane in adverse weather conditions can compromise stability and control. Equipment Inspection: Conduct a thorough inspection of the crane before operation. Check for any signs of wear, damage, or malfunction in components such as cables, hooks, sheaves, and hydraulic systems. Operator Qualifications: Ensure that the crane operator is qualified, certified, and experienced in the specific type of crane being used. The operator should be familiar with the crane's controls and safety procedures. Communication: Establish clear and effective communication protocols between the crane operator and the ground personnel. Use standardized signals and communication devices to relay instructions. Clearance and Obstacles: Verify that there is adequate clearance for the crane and load. Identify and address any potential obstacles in the lifting path to prevent collisions or entanglements. Boom and Jib Configuration: Verify that the crane's boom and jib are set up according to the manufacturer's specifications for the specific lift. Incorrect configuration can compromise stability and load control. Emergency Procedures: Have well-defined emergency procedures in place, including evacuation plans and communication channels. All personnel involved in the lifting operation should be familiar with these procedures. Load Stability: Ensure that the load is properly rigged and secured. Use appropriate slings, hooks, and rigging equipment. Verify that the load is balanced to prevent shifting during lifting. Proximity to Power Lines: Be aware of the proximity of power lines to the crane. Maintain a safe distance to prevent electrocution hazards. Use spotters or proximity alarms when working near power lines. Daily Inspections: Implement a daily inspection routine for the crane. Regular checks before each shift help identify potential issues early and ensure that the crane is in good working condition #safety #safetyfirst #safetytips #healthandsafety #safetyalways