Nora Lighting, Inc.’s Post

HH-556RLK Edge Banding Machine - Double Glue Pots with Quick Melt 1) Panel length: ≥120mm 2) Panel width: ≥95m 3) Panel thickness: 10~60mm 4) Tape width: 13~63mm 5) Tape thickness: 0.4~3.0mm 6) Feeding speed: 15~18~20m/min 7)Total power: 27kw 8) Working pressure: 0.65mpa

Want to measure rotating shaft speed, but without optical pickup? What to do? Zebra tape is an option, but need to be careful with butt joint correction. https://lnkd.in/gfW-z6Vu

I like the color of this solder mask！🌟 #pcbprototype #pcbdesign

Single shaft tape rewinding machine with auto peeling function.Whatsapp:+8618352076649

cylinder LED screen. it can be straight and spliced to different curved degree.

Have you heard of Super Red Hot? Check out Bullard's proprietary temperature/color correlation palette Super Red Hot in the Bullard NXT. This device will not show colorization until in low sensitivity mode (which is indicated by the green triangle in the upper left-hand corner of the display). Black, gray, white: 0-499 degrees Fahrenheit (moving white/gray convection currents should be treated as HOT!). Yellow: 500-799 degrees Fahrenheit. Orange: 800-999 degrees Fahrenheit. Red: 1000 degrees plus Fahrenheit. These types of concepts can be easily demonstrated with the Max Fire Box. Stay Intelligently Aggressive!

Brass handles And knobs with PVD finish

Solder Mask Registrations: what we allow and what not 1. The Soldermask may encroach on lands as long as the minimum annular ring requirements are maintained. 2. Soldermask is permitted in those PTH not intended for solder fill. 3. No isolated pads are exposed. 4. No Soldermask encroachment on edge board connector fingers or test points. 5. On SMT-pads with pitch 1,25 mm encroachment is permitted on one side of land only and does not exceed 50 micron (2 mil). 6. On SMT-pad with pitch < 1,25 mm encroachment is permitted on one side of land only and does not exceed 25 micron (1 mil).

BOE's 31.6-inch spliced sliding flexible display product can achieve three sizes and four display states: 31.6-inch 32:9, 24.6-inch 24:9, and 17.6-inch 18:9, it can be switched according to different scene requirements.

Get the Part II of the Multilayer Coating article (how do you coat multiple layers with slot die?) here: https://lnkd.in/g6VyMhyr