Remote Estimation LLC’s Post

This is a diagram showing the cross-section of a road, detailing the layers involved in its construction. Here's a summary of the layers from bottom to top: 1. Cleaning and Graveling: The preparation of the overall ground level. 2. Embankment: A 200mm thick base for raising the road above ground level, providing support. 3. Sub Gravel: A 500mm thick layer of gravel to enhance stability. 4. Granular Sub-Base: A 200mm thick layer of compacted material for load distribution. 5. Wet Mix Macadam: A 250mm thick layer providing structural strength and drainage. 6. Dense Mix Bitumen Macadam: An 80mm thick layer to ensure durability and act as a base course. 7. Bitumen Concrete Mix: A 40mm thick top layer for a smooth and durable road surface. 8. Seal Coat: A thin layer applied to protect the bitumen concrete mix. 9. Prime Coat and Tack Coat: Used to bond layers together effectively. If you have any questions about this diagram or need further clarification, let me know!

This is the boom machine with the help of a boom machine we can wear concrete on columns pc starters footings shear walls and slabs more over construction sites #myhome #cement #concrete #construction #siteengineer #graduateengineertrainee.

👉Causes Of Segregation on Concrete 1.) Insufficient compaction to concrete. 2.) Less cover to reinforcement bars. 3.) Improper Workability in concrete 4.) Concrete already set before placing . 5.) High concrete free fall while pouring 6.) Form work not watertight/ rigid. 7.) More coarse aggrgegates than designed mix proportions and over sized aggregates. 8.) Improper placement of bars at column and beam junction. 9.) Addition of more water than designed at site for achieving workability. 10.) Steel congestion not allowing concrete flow to all corner.

A concrete-tight fitting is a fitting that prevents ingress of concrete aggregate (Portland-type cement and sand). This rating is important for electrical conduit systems that run through poured concrete structures. It indicates that the fitting will not allow concrete to enter when concrete is poured and compacted around a raceway that is built within the form. #gibsonstainless #faqfriday

Are you building a concrete slab or laying a concrete base? It’s important to note that a large area of poured concrete is prone to cracking. To control this, it is recommended to make planned cuts, known as control joints, into the concrete to allow the cracks to form underneath the surface. For most projects, control joints should be cut six to 18 hours after concrete has been poured. Any later than this can damage the concrete. #DIY #NorthEastConcrete #ConcreteSuppliersNorthEast #ConcreteContractors

Self-Compacting Concrete (SCC) is defined as concrete that has an ability to flow under its own weight, to fill the required space or formwork completely and to produce a dense and adequately homogenous material without a need for vibrating compaction

How to Install a Strong Lift Structure to Support Your Building Learn how to properly install a lift structure to support your building and avoid cavity issues. Discover the best methods using concrete or steel for maximum strength. This video focuses on the external aspects of the building. #BuildingSupport #LiftInstallation #StructureStrength #ConstructionMethods #BuildingMaintenance #BuildingSecurity #LiftSafety #BuildingStructures #ConcreteOrSteel #StructuralIntegrity

Reinforcement concrete is used in concrete structure https://lnkd.in/dPCiAC7m

Perfect core bit for precast concrete. If you look at the teeth you can see that its not like other core bits you see.

Level Concrete Slabs - A Homeowner's Guide https://hubs.li/Q02xp28Y0