A deep dive into water and wastewater treatment,Production of Coagulant for Application in Treatment of Turbid Water,Water chemistry in power plant
This is the most common method used to produce caustic soda flakes. It involves the electrolysis of salt brine (NaCl) to produce sodium hydroxide (NaOH), chlorine gas (Cl2), and hydrogen gas (H2). The sodium hydroxide is then collected as flakes or pellets.
Lead Process/Process Safety engineer Certified PHA/HAZOP Leader ,LOPA/SIL Engineer TÜV Certified ,Hydrogen safety, Commissioning specialist , FEED studies, Instructor ,Design review.
Glycol Dehydration by TEG is one of the gas most common dehydration processes, which applies absorption process by using liquid desiccant, triethylene glycol (TEG), to remove or lower water content from natural gas stream.
Buffers, necessary to adjust and maintain the pH, can be salts of a weak acid and a weak base, such as carbonates, bicarbonates, and hydrogen phosphates (Nimerick, 1996), or weak acids such as formic acid, fumaric acid, and sulfamic acid. Increased temperature stability of various gums can be achieved by adding sodium bicarbonate to the fracturing fluid and thus raising its pH to 9.2–10.4. #Globechem #oilandgas #chemical #chemicalindustry #oilandgasindustry #waterfiltration #watermanagement #gashydratecontrol #wax #depostion #lubricants #oil #gas
HCl in methanol or ethanol does the trick. Assemble on HMBA linker remove side chain protection before cleaving from the resin with dilute NaOH for free acids, ammonia for amides or amines for other amides. #opnme
A block diagram of caustic soda production typically includes the following main components and process. 1) salt preparation -Salt(sodium chloride)as the prepared for the production process 2) brine solutions -The salt is dissolve in the water to create brine solutions 3) electrolysis process (Chlor-alkali #Thyssenkrupp) -The brine solutions in undergoes the electrolysis in electrolytic cell. -Chlorine gas produced by anode. -Sodium hydroxide is produced by cathode. - Hydrogen gas is also produced by-product 4) product separation -The chlorine gas, hydrogen gas, sodium hydroxide is separate to each other. 5) purification -The sodium hydroxide solution purified to remove impurities. 6) concentration -The purified sodium hydroxide solution is concentrated to increase the concentration of caustic soda. 7) storage and packing - The concentrad caustic soda is store and packing for use. This diagram provided a high leval overview of the main stage involved to caustic soda production, from the salt preparation to storage and packing of the final product. #causticsoda #flowdiagram #chloralkaliprocess #electrolysis
We are a manufacturer of iron oxide, calcined kaolin, titanium dioxide/TiO2, Chromic oxide and other chemical raw materials, as well as CPC and GPC manufacturers.
6mo👍 👍 👍