Advanced 360 Total Floor Care Systems’ Post

𝐏𝐫𝐞𝐯𝐞𝐧𝐭 𝐆𝐫𝐨𝐮𝐭 𝐒𝐭𝐚𝐢𝐧𝐬 𝐚𝐧𝐝 𝐃𝐢𝐬𝐜𝐨𝐥𝐨𝐫𝐚𝐭𝐢𝐨𝐧 Keeping grout clean and odor-free isn’t easy. It’s even harder when:  • It’s Exposed to Chemicals: A harsh (i.e. abrasive) cleaning chemical will erode a grout sealer’s protective layers. Making stains worse. • It’s Not Maintained: When a floor isn’t properly and regularly maintained, its grout channels will attract dirt. Making stains worse. • It’s Not Sealed: If Portland cement-based grout isn’t sealed when it’s installed, it will absorb moisture. Which will eventually cause staining. To preserve your grout's appearance and integrity, have it properly sealed upon installation and ensure that it receives proper maintenance on a regular basis. 𝐖𝐚𝐧𝐭 𝐚 𝐰𝐨𝐫𝐫𝐲-𝐟𝐫𝐞𝐞 𝐟𝐥𝐨𝐨𝐫 𝐜𝐚𝐫𝐞 𝐞𝐱𝐩𝐞𝐫𝐢𝐞𝐧𝐜𝐞? 𝐂𝐚𝐥𝐥 𝐭𝐨𝐝𝐚𝐲 𝐚𝐭 913-322-6200 𝐚𝐧𝐝 𝐬𝐩𝐞𝐚𝐤 𝐰𝐢𝐭𝐡 𝐨𝐧𝐞 𝐨𝐟 𝐨𝐮𝐫 𝐅𝐚𝐜𝐢𝐥𝐢𝐭𝐲 𝐒𝐞𝐫𝐯𝐢𝐜𝐞 𝐂𝐨𝐧𝐬𝐮𝐥𝐭𝐚𝐧𝐭𝐬. #Advanced360 #CommercialFloors #PreventGroutStains

𝐖𝐡𝐲 𝐈𝐬 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠 𝐆𝐫𝐨𝐮𝐭 𝐒𝐨 𝐇𝐚𝐫𝐝? Cleaning grout is usually hard because it wasn’t sealed when it was installed or it’s been compromised by the use of harsh cleaning chemicals. Grout is porous so it absorbs dirt, debris, and moisture, and these contaminants can produce bacteria, mold, or mildew and make grout look dirty or stained. Dirty grout is hard to clean and harder to maintain, but a quality service provider can rejuvenate dirty or stained grout. Sealing and cleaning grout on a regular basis will preserve its like-new appearance, and sealing grout when it’s installed will make grout easy to clean and maintain.  𝐖𝐚𝐧𝐭 𝐚 𝐰𝐨𝐫𝐫𝐲-𝐟𝐫𝐞𝐞 𝐟𝐥𝐨𝐨𝐫 𝐜𝐚𝐫𝐞 𝐞𝐱𝐩𝐞𝐫𝐢𝐞𝐧𝐜𝐞? 𝐂𝐚𝐥𝐥 𝐭𝐨𝐝𝐚𝐲 𝐚𝐭 913-322-6200 𝐚𝐧𝐝 𝐬𝐩𝐞𝐚𝐤 𝐰𝐢𝐭𝐡 𝐨𝐧𝐞 𝐨𝐟 𝐨𝐮𝐫 𝐅𝐚𝐜𝐢𝐥𝐢𝐭𝐲 𝐒𝐞𝐫𝐯𝐢𝐜𝐞 𝐂𝐨𝐧𝐬𝐮𝐥𝐭𝐚𝐧𝐭𝐬. #Advanced360 #CleanGrout #TileAndGrout  

𝐖𝐡𝐲 𝐈𝐬 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠 𝐆𝐫𝐨𝐮𝐭 𝐒𝐨 𝐇𝐚𝐫𝐝? Cleaning grout is usually hard because it wasn’t sealed when it was installed or it’s been compromised by the use of harsh cleaning chemicals. Grout is porous so it absorbs dirt, debris, and moisture, and these contaminants can produce bacteria, mold, or mildew and make grout look dirty or stained. Dirty grout is hard to clean and harder to maintain, but a quality service provider can rejuvenate dirty or stained grout. Sealing and cleaning grout on a regular basis will preserve its like-new appearance, and sealing grout when it’s installed will make grout easy to clean and maintain.  𝐖𝐚𝐧𝐭 𝐚 𝐰𝐨𝐫𝐫𝐲-𝐟𝐫𝐞𝐞 𝐟𝐥𝐨𝐨𝐫 𝐜𝐚𝐫𝐞 𝐞𝐱𝐩𝐞𝐫𝐢𝐞𝐧𝐜𝐞? 𝐂𝐚𝐥𝐥 𝐭𝐨𝐝𝐚𝐲 𝐚𝐭 913-322-6200 𝐚𝐧𝐝 𝐬𝐩𝐞𝐚𝐤 𝐰𝐢𝐭𝐡 𝐨𝐧𝐞 𝐨𝐟 𝐨𝐮𝐫 𝐅𝐚𝐜𝐢𝐥𝐢𝐭𝐲 𝐒𝐞𝐫𝐯𝐢𝐜𝐞 𝐂𝐨𝐧𝐬𝐮𝐥𝐭𝐚𝐧𝐭𝐬. #Advanced360 #CleanGrout #TileAndGrout  

✍️ 𝐃𝐨'𝐬 𝐚𝐧𝐝 𝐃𝐨𝐧'𝐭𝐬 𝐨𝐟 𝐓𝐢𝐥𝐞 𝐚𝐧𝐝 𝐆𝐫𝐨𝐮𝐭 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠 When it comes to tile and grout cleaning, knowing the do's and don'ts can make a big difference in maintaining a clean and pristine surface: ✅ Do Clean the Tiled Surfaces Regularly: Regular cleaning helps prevent dirt and grime buildup, keeping your tiles looking fresh and extending their lifespan. ✅ Do Handle Spills ASAP: Promptly cleaning up spills prevents them from seeping into the grout and causing stains or discoloration. ❌ Don’t Use Abrasive Tools: Avoid using abrasive tools or harsh cleaning agents that can scratch or damage the surface of your tiles. ❌ Don’t Use Excess Moisture: Using too much water or moisture when cleaning tile and grout can lead to mold, mildew, and damage to the grout lines. By following these simple guidelines, you can effectively clean and maintain your tile and grout, keeping them looking their best for years to come. ☛ Read More At This Link:➟ https://lnkd.in/d6XX3Hha #TileCleaning #GroutCleaning #HomeMaintenance #CleaningTips #DIYCleaning #xtremecleaningsd

 1. Regular Cleaning: Sweep debris and wash with a mild soap solution to prevent mold and mildew. 2. Inspect Annually: Check for loose boards, protruding nails, or any signs of rot. 3. Seal and Stain: Apply a water-repellent sealant every 2-3 years to protect the wood from weathering. 4. Sand Rough Spots: Use sandpaper on any splintered areas to keep the surface smooth and safe. 5. Tighten Hardware: Annually tighten any loose screws and replace corroded hardware. 6. Trim Plants: Keep bushes and vines trimmed back to prevent moisture and pests from damaging the wood. 7. Sun Protection: Consider a UV-protective finish if your deck gets a lot of sun. 8. Check for Pests: Regularly inspect for signs of termites or other wood-damaging insects. 📌 Remember, a little upkeep goes a long way to extending the life and beauty of your deck. Ready to get started? #DIYDeck #HomeCare #DeckMaintenance #DeckTips

3 Common Tub Leaks And How To Repair Them A warm bath is a great way to chase away the day's stress, but if your bathtub leaks, the experience becomes less inviting. Here are three common bathtub leaks you can address yourself. 1. Faucet Drip: Remove the outer plastic covers to expose the packing nut after turning off the water supply. Remove the nut and replace the worn stem washer using a screwdriver or wrench. 2. Missing Grout: Grout is the material between wall and floor tiles that allows for a watertight seal. If even a tiny amount of grout is missing, water will seep into the building materials to which the tile is attached and cause mold and rot problems. To repair, remove the loose grout, thoroughly dry the area, and reapply the product. 3. Drain Leak: The drain pipe is topped with a rubber gasket to keep wastewater from flowing to the outside walls of the drain. Plumber's putty is used to seal the gasket, and it tends to dry out and leak when it ages. Replacing the putty is the solution for this drain issue. If you need help repairing a tub leak in Harrah, feel free to contact us. We are experts at detecting and repairing tub leaks. Call today to schedule an appointment! #BathtubLeak #BathtubRepair #HarrahPlumber

🔧 FAQ Friday 🔧 Q: How do I prepare the surface for the application of SEAL-ONCE products? A: SEAL-ONCE must be applied to bare wood. If the surface has been previously coated with another stain or sealer, that product must be removed. Here’s how to properly prepare your wood project: Power Washing: Use a power washer to clean the surface thoroughly. Cleaning: Use a cleaner such as our All Wood Cleaner to ensure all dirt and debris are removed. Sanding: Sand the surface to remove any remaining stain or sealer. Stripping: Use a stripper if needed to remove all previous coatings. Ensure all surfaces have been properly cleaned by using the appropriate SEAL-ONCE cleaner (All Wood Cleaner or Concrete/Masonry Cleaner). After cleaning, rinse the surface with water and allow it to dry completely. Once the surface is clean and dry, SEAL-ONCE products can be applied according to the package instructions. #FAQFriday #SurfacePreparation #SEALONCE #WoodCare #EcoFriendly #ProtectYourInvestment

🔧 FAQ Friday 🔧 Q: How do I prepare the surface for the application of SEAL-ONCE products? A: SEAL-ONCE must be applied to bare wood. If the surface has been previously coated with another stain or sealer, that product must be removed. Here’s how to properly prepare your wood project: Power Washing: Use a power washer to clean the surface thoroughly. Cleaning: Use a cleaner such as our All Wood Cleaner to ensure all dirt and debris are removed. Sanding: Sand the surface to remove any remaining stain or sealer. Stripping: Use a stripper if needed to remove all previous coatings. Ensure all surfaces have been properly cleaned by using the appropriate SEAL-ONCE cleaner (All Wood Cleaner or Concrete/Masonry Cleaner). After cleaning, rinse the surface with water and allow it to dry completely. Once the surface is clean and dry, SEAL-ONCE products can be applied according to the package instructions. #FAQFriday #SurfacePreparation #SEALONCE #WoodCare #EcoFriendly #ProtectYourInvestment

THE 6 STEPS TO REMOVING SPOTS 1. Catch it while it's fresh, when chances of removal are 75% better. Don't iron or hot-air dry until the stain is gone. Heat will set most stains. 2. First blot up all the liquid and scrape up all the solids you can. On a large liquid spill you can use a wet/dry vac. Be careful not to spread the stain. 3. Test any chemical you intend to use in a hidden area to make sure it won't discolor or damage the surface. 4. Apply spotter and work from the outside of the stain in, to avoid spreading. Blot, don't scrub; strike with the flat face of a spotting brush if needed to help break up the stain. 5. Rinse chemical spotters out with water, blot the area dry and feather the edges. Brush or fluff up pile or nap. 6. On carpet and upholstery, put a thick pad of toweling over the spot, weight it down with books, and leave it there overnight to "wick up" any remaining moisture.

Concrete surfaces, such as driveways, patios, and walkways, are durable and versatile but are not immune to staining. Over time, they can become discoloured due to oil spills, grease, rust, mould, algae, and other contaminants. These stains not only detract from the appearance of your property but can also lead to surface deterioration if left untreated. At The Stain Eaters, we specialise in removing stains from concrete surfaces. Our experienced technicians use specialised cleaning solutions and techniques tailored to the type of stain and the condition of the concrete. We utilise custom-built pressure washing equipment capable of delivering up to 3000 psi, along with hot water pressure washing, to effectively break down and remove stubborn stains. Our equipment features up to 100 metres of hose, allowing us to access and clean large areas efficiently without the need to constantly reposition equipment. Whether dealing with oil and grease stains from vehicles, rust stains from metal fixtures, or organic stains from mould and algae, we have the expertise and tools to tackle the problem. In addition to stain removal, we can apply protective sealers to your concrete surfaces, creating a barrier against future staining and making maintenance easier. https://lnkd.in/gcHpXiHh #ConcreteCleaning #DrivewayCleaning #PaverCleaning #PressureWashing