Attend home Leakages & SAVE water!!!!. It’s time to act fast to avoid water scarcity:
Water leakages in home & office:
Drip, Drip, Drip:
Leaks from pipes, plumbing fixtures and fittings are a significant source of water waste for many households. Research has shown that the typical home can lose 2,000 to 20,000 gallons (7.6 m3 to 76 m3) of water per year due to leaks. Some leaks are obvious, such as dripping faucets and leaking water heaters. Unfortunately, many leaks go undetected for years because the source of the leak is not visible.
Faucet, Shower, and Tub Leaks:
Faucet leaks are a common occurrence and usually simple to repair. A faucet dripping slowly at only one drop every two seconds will waste more than 1,000 gallons (3.7 m3) per year. The repairs necessary to stop the leak depends on the type of faucet, and there are four basic types found in most homes: compression valve, ball types, cartridge types, and ceramic discs. Each type of faucet has unique methods of repair. If you are accustomed to using tools and making minor home repairs you should be able to repair minor faucet leaks.
Toilet Leaks:
Toilets are one the most common sources of leaks in the home, and usually go unnoticed because the leaks are often silent and out of view. Several research studies have found 20% to 35% of all residential toilets leak to some degree. Large toilet leaks can be detected when the valve constantly emits a hissing or gurgling sound when the toilet is not in use.
Prevention & Solutions:
Plumbing leaks can be prevented with a few simple measures. Plus, learn what to do when leaks occur.
Plumbing leaks and the resulting water damage repairs or mold clean-up can be costly. Avoid the inconvenience with some good habits and modest investments in time and money.
1. Locate Your Home’s Main Water Shut-Off Valve:
If there’s ever a plumbing leak, you can go straight there and quickly turn off the water to the entire house.
2. Install Shut-Off Valves at Individual Appliances and Fixtures:
This allows you to keep water flowing in other areas of the house while making site-specific repairs.
3. Install a Flow Sensor:
Install a flow sensor that detects plumbing leaks and automatically shuts off water to the entire house or a specific appliance.
4. Don’t Use Exposed Pipes as Hanger Rods for Laundry or to Store Clothes:
Doing so can loosen joints and fasteners and lead to plumbing leaks.
5. Don’t Overload Vanities and Sink Cabinets:
When you crowd stuff into your cabinets, you can jostle water supply pipes and drains, loosening connections and causing plumbing leaks. If drips occur, they’re tough to spot amid piles of cleaners and spare TP.
6. Fix Problems Quickly:
Even small leaks can make pipes corrode more quickly, and cause significant water damage or mold. Take the time to periodically scout for signs of leaks and drips.
All the damaged/broken/ plumbing system needs to be repaired or replaced to avoid wastage of the water.