当前版本：
Current Version:
　　mod: v2.12
　　game: v2.11～v2.13


​　　游戏中驾驶车辆的默认参数简直是依托答辩——至少用电脑键盘是这样的。开起车来左冲右突，分分钟车祸现场。
　　只改动默认参数是不够的，我额外添加了两个档位，最终使得车内视角的沉浸式驾驶成为可能。
　　这是我从游戏1.3版本以来陆续改善的自用设置，分享给做完任务想驾车兜风的你。

　　此mod需要 RED4ext 和 Input Loader。强烈建议搭配 Better Vehicle First Person 使用。
　　（2.11版本更新：目前几款常驾车型如赫拉、德拉曼、保时捷的默认车内视野已经改得可以了。）

　　游戏在 v2.0 版本开启了驾驶中战斗，使得键位冲突数量大大增加。在 v1.x 版本时期，此模组的主要任务是设置合理的引擎加速值；而现在它几乎变成了半个键位重分配模组。改动的键位有点多（见图片栏的设置截图），如果你已经习惯官方键位的话，请先考虑一下重新适应的问题。

　　The default parameters for driving vehicles in the game are nothing short of a disaster – at least with a computer keyboard.
　　It wasn't enough to just change the default parameters, I added two additional gears, which finally made immersive driving possible (in-car view).
　　This is my self-use settings that I have improved since version 1.3 of the game, and I share it with you who want to drive after completing a mission. 

　　This mod requires RED4ext and Input Loader. It is highly recommended to use with Better Vehicle First Person.
　　（v2.11 update: The default interior vision of several high-driving models such as Hera, Delaman, and Porsche has become good enough.）

　　In v2.0, the game started driving battles, which greatly increased the number of keying conflicts. In the v1.x release, the main task of this mod was to set reasonable engine acceleration values, but now it is almost half a key reassignment mod. There are so many keys remaped (see the images upleaded), and if you're used to the official keys, you may need to consider the burden of readapting to using this mod.


提示：
　　Input Loader v0.1.1、v0.2.2+ 都可用（后者用 Vortex 安装需强行解压），其自带的xml底本文件并非最新版，可能会导致一些意料外的瑕疵，建议先手动覆盖为游戏当前版本。详见下方操作指引。

　　如果不想折腾依赖模组，可以使用可选下载中的手动覆盖版（内为合并后的【inputUserMappings.xml】文件）。请自己做好原文件的备份（我在可选项目里放了一个），并确定你了解你在做什么。
　　用法是一样的，初次使用时用【恢复默认设置】加载键位。如果有其他自己要改的键位，可以在加载之后修改。
　　注意：每次游戏更新或进行游戏文件验证，inputUserMappings.xml 文件都会被覆盖为游戏原版。

TIPS:
　　Input Loader v0.1.1 or v0.2.2+ works (the latter needs to be forcibly decompressed when installed with Vortex), but the XML file that comes with them is not the latest version, which may cause some unexpected flaws, so it is recommended to manually replace it as the current version of the game. See the instructions below.

　　If you don't want to toss the dependent modules, you can use the manually replacing version (contains the merged inputUserMappings.xml file) in the optional download. Make a backup of the original file yourself (there is one in the optional files) and make sure you understand what you're doing.
　　The usage is the same, use [Restore Default Settings] to load the keys when you use it for the first time. If you have any other keys that you want to change, you can change them after loading.
　　Note: the inputUserMappings.xml file will be replaced to the stock version every time the game updates or you Verify the game files.


键位图示：
Keys:


安装：模组合并：

• 确认依赖模组已安装。
• （可选）修正 Input Loader：复制游戏原版【..\Cyberpunk2077\r6\config\inputUserMappings.xml】文件到【..\Cyberpunk2077\red4ext\plugins\input_loader\】文件夹中覆盖同名文件。（使用 Vortex 的话，就复制到【..\CP2077-Mods\input_loader.zip-4575-0-1-1-1683848529\red4ext\plugins\input_loader\】文件夹中覆盖同名文件。)
• 使用 Vortex 安装本模组；或手动移除本模组旧版文件，解压zip文件中的r6文件夹到游戏主目录(..\Cyberpunk2077)中。
• 安装后初次进入游戏时，进入【设置 - 键位绑定】，按F1键“恢复默认设置”并回车确定，这会加载修改后的键位，按“应用”应用修改后回到游戏。
  

Install: Merging with MOD:

• Confirm that the dependent MODs are installed.
• (optional) Fix Input Loader: Copy the original version [..\Cyberpunk2077\r6\config\inputUserMappings.xml] of the game to the folder [..\Cyberpunk2077\red4ext\plugins\input_loader\] and overwrite the file with the same name. (If using Vortex, copy to [..\CP2077-Mods\input_loader.zip-4575-0-1-1-1-1683848529\red4ext\plugins\input_loader]. )
• Install the mod with Vortex, or manually remove the old version of the mod and unzip the r6 folder from the zip file to the game directory (..\Cyberpunk2077\).
• When start the game for the first time after installation, enter Settings - Key Binding, press the F1 (Restore Defaults) and hit Enter to confirm, this will load the modified keys, press "Apply" to apply the modifications and return to the game.
  

安装-可选：手动覆盖：

• 确认已备份好游戏原版【..\Cyberpunk2077\r6\config\inputUserMappings.xml】文件。
• 解压zip文件中的【r6\config\inputUserMappings.xml】到游戏目录，确认覆盖 inputUserMappings.xml 文件。
• 安装后初次进入游戏时，进入【设置 - 键位绑定】，按F1键“恢复默认设置”并回车确定，这会加载修改后的键位，按“应用”应用修改后回到游戏。
  

Install-Optional: Manually Replacing:

• Make sure that you have backed up the original version of the [..\Cyberpunk2077\r6\config\inputUserMappings.xml].
• Manually unzip the [r6\config\inputUserMappings.xml] from the zip file to the game directory, confirm replacing inputUserMappings.xml.
• When start the game for the first time after installation, enter Settings - Key Binding, press the F1 (Restore Defaults) and hit Enter to confirm, this will load the modified keys, press "Apply" to apply the modifications and return to the game.
  

卸载：

• 在 Vortex 中卸载本模组；或：进入游戏目录【..\Cyberpunk2077\r6\input】，删除【HowHowDrive.xml】文件；或：恢复备份的【..\Cyberpunk2077\r6\config\inputUserMappings.xml】文件。
• 卸载后初次进入游戏时，进入【设置 - 键位绑定】，按F1键“恢复默认设置”并回车确定，这会加载游戏默认的键位，按“应用”应用修改后回到游戏。
  

Uninstall:

• Uninstall the mod in Vortex; OR: go to the game directory (..\Cyberpunk2077\r6\input), delete the HowHowDrive.xml file; OR: Restore the stock ..\Cyberpunk2077\r6\config\inputUserMappings.xml from backup.
• When start the game for the first time after the uninstallation, enter Settings - Key Binding, press F1 (Restore Defaults) and hit Enter to confirm, which will load the default keys of the game, press "Apply" to apply the modification and return to the game.
  

冲突可能性：
　　此mod实际上是通过作用于【..\Cyberpunk2077\r6\config\inputUserMappings.xml】文件而生效的，所以理论上它只会与其他也作用于该配置文件的模组相冲突。

Possible Conflicts:
　　This mod actually works by acting on ..\Cyberpunk2077\r6\config\inputUserMappings.xml. So in theory, it will only conflict with other mods that also acts on the same XML file.