0 of 0
About this mod
A Player Home on Spectacle Island. (Clipboard Pattern included)
- Requirements
- Permissions and credits
Introduction:
Special Note: This is not a Transfer Settlements blueprint. I created a blueprint and normally a blueprint would work fine, but importing a blueprint of this size that takes up all of Spectacle Island has its problems. Either one end or the other would not render correctly and I felt it might be too cumbersome. So, I decided to just include a Clipboard Resurrection Pattern File that works just fine.
Another project I built a few years ago and wanted to update before moving on to something else. Actually, I started this project so I could become more familiar with the Hotchpotch mod, and this is what developed.
I also use Workshop Plus that allows flight in workshop mode, so getting around the build is easy. If you don't have WS+ (or maybe a jetpack) then you could use 'tcl' (toggle collision) in the console, then change the 'fast travel target' to anywhere else in the build. However, there is a fast travel mat already on the landing pad for the Vertibird. I have the fast travel mats in Resources/Miscellaneous on the main menu.
Some Background:
I'm not really a settlement builder but do enjoy building in Fallout 4. I create these builds for my own enjoyment, and there are no plans to update them (unless I really want to). Also, this comes as is and works fine on my pc, although other user experiences may vary. I just hope that others can enjoy using this as much as I enjoyed building it. I also build with the idea of using as few mods as is necessary. So, most of the mods I use have been chosen because they are comprehensive and include many different pieces.
Recommended Mods:(highly recommended)
Workshop Plus (allows flying while in workshop mode among other options and makes moving around in a build much easier and really can add to your creativity) (just don't forget to shut off the workshop 5 second timer (F5) (from Place Everywhere))
Build High - Expanded Settlements 5.0 (doesn't work with Workshop Anywhere but offers 200+ floors and expanded boundaries in vanilla settlements) (great for any arial builds like skyscrapers/aircraft/spacecraft etc...)
Place Everywhere (of course) (If I could only choose one building mod for Fallout 4, this would be it.)
Installation:
* Make sure that you have F4SE, and all required mods (as listed in Requirements) installed.
* Extract the file "Data" and copy, then paste to your Fallout 4 game folder (C:\Program Files (x86)\Steam\steamapps\common\Fallout 4).
* This Clipboard Pattern uses slot 10. If you would rather it be a different folder, just copy and paste into a different Clipboard folder from 1-500 located at C:\Program Files (x86)\Steam\steamapps\common\Fallout 4\Data\F4SE\Plugins\Clipboard.
* The easiest way I've found to add a clipboard file is to create a shortcut to the clipboard folder and place it on my desktop. Then when I download a new clipboard file I can extract it, copy it, go right to the clipboard folder and paste the new pattern in one of the folders. Done!
Importing:
Using the Clipboard Resurrection pattern file:
Just fast travel to Spectacle Island to begin.
Then while in game (and in the workshop):
Special Note: After recently importing the pattern file, Clipboard doesn't seem to include the dozen or so SOE small generators under the main structure. In fact, they seemed to be invisible. It's an easy fix though. Just replace each piece one at a time from the workshop menu (power/soe/generators). Using Place Everywhere, highlight/copy the coordinates of the 1st piece with '=', scrap it, then paste the new piece in using '0' (two keys to the left). Repeat the process for the rest.
Special Note: Remember, there are 4294 objects that need to render. Wait till everything is highlighted (blue), then you can destroy the Clipboard Tool and the blue will go away. After importing the pattern don't immediately save the game. The papyrus function needs time to catch up with all the changes that were made, and your game will freeze until it finishes. This process may take 5 minutes then it will save your game. It's best to let it finish and probably a good time to take a look around (maybe even hook up the power). I've included pictures that show you where. When it finishes, create a full save.
Special Note: If you enjoy building in Fallout 4 and are on Facebook, the best building groups I've found are the Fallout 4 Settlement Building and Fallout 4: Commonwealth Creators groups. They include some of the best builders in the Fallout community. They also include builders of all skill levels and can answer any questions you might have about mods, materials, or techniques used for building in Fallout 4.
Special Note: This is not a Transfer Settlements blueprint. I created a blueprint and normally a blueprint would work fine, but importing a blueprint of this size that takes up all of Spectacle Island has its problems. Either one end or the other would not render correctly and I felt it might be too cumbersome. So, I decided to just include a Clipboard Resurrection Pattern File that works just fine.
Another project I built a few years ago and wanted to update before moving on to something else. Actually, I started this project so I could become more familiar with the Hotchpotch mod, and this is what developed.
I also use Workshop Plus that allows flight in workshop mode, so getting around the build is easy. If you don't have WS+ (or maybe a jetpack) then you could use 'tcl' (toggle collision) in the console, then change the 'fast travel target' to anywhere else in the build. However, there is a fast travel mat already on the landing pad for the Vertibird. I have the fast travel mats in Resources/Miscellaneous on the main menu.
Some Background:
I'm not really a settlement builder but do enjoy building in Fallout 4. I create these builds for my own enjoyment, and there are no plans to update them (unless I really want to). Also, this comes as is and works fine on my pc, although other user experiences may vary. I just hope that others can enjoy using this as much as I enjoyed building it. I also build with the idea of using as few mods as is necessary. So, most of the mods I use have been chosen because they are comprehensive and include many different pieces.
Recommended Mods:(highly recommended)
Workshop Plus (allows flying while in workshop mode among other options and makes moving around in a build much easier and really can add to your creativity) (just don't forget to shut off the workshop 5 second timer (F5) (from Place Everywhere))
Build High - Expanded Settlements 5.0 (doesn't work with Workshop Anywhere but offers 200+ floors and expanded boundaries in vanilla settlements) (great for any arial builds like skyscrapers/aircraft/spacecraft etc...)
Place Everywhere (of course) (If I could only choose one building mod for Fallout 4, this would be it.)
Installation:
* Make sure that you have F4SE, and all required mods (as listed in Requirements) installed.
* Extract the file "Data" and copy, then paste to your Fallout 4 game folder (C:\Program Files (x86)\Steam\steamapps\common\Fallout 4).
* This Clipboard Pattern uses slot 10. If you would rather it be a different folder, just copy and paste into a different Clipboard folder from 1-500 located at C:\Program Files (x86)\Steam\steamapps\common\Fallout 4\Data\F4SE\Plugins\Clipboard.
* The easiest way I've found to add a clipboard file is to create a shortcut to the clipboard folder and place it on my desktop. Then when I download a new clipboard file I can extract it, copy it, go right to the clipboard folder and paste the new pattern in one of the folders. Done!
Importing:
Using the Clipboard Resurrection pattern file:
Just fast travel to Spectacle Island to begin.
Then while in game (and in the workshop):
- Build the clipboard tool.
- Choose "Move To Pattern Source Location" in the action menu first.
- Then choose "Paste From Clipboard".
Special Note: After recently importing the pattern file, Clipboard doesn't seem to include the dozen or so SOE small generators under the main structure. In fact, they seemed to be invisible. It's an easy fix though. Just replace each piece one at a time from the workshop menu (power/soe/generators). Using Place Everywhere, highlight/copy the coordinates of the 1st piece with '=', scrap it, then paste the new piece in using '0' (two keys to the left). Repeat the process for the rest.
Special Note: Remember, there are 4294 objects that need to render. Wait till everything is highlighted (blue), then you can destroy the Clipboard Tool and the blue will go away. After importing the pattern don't immediately save the game. The papyrus function needs time to catch up with all the changes that were made, and your game will freeze until it finishes. This process may take 5 minutes then it will save your game. It's best to let it finish and probably a good time to take a look around (maybe even hook up the power). I've included pictures that show you where. When it finishes, create a full save.
Special Note: If you enjoy building in Fallout 4 and are on Facebook, the best building groups I've found are the Fallout 4 Settlement Building and Fallout 4: Commonwealth Creators groups. They include some of the best builders in the Fallout community. They also include builders of all skill levels and can answer any questions you might have about mods, materials, or techniques used for building in Fallout 4.