Mazzella Companies

What does being Hungry mean to you? Watch the full video on YouTube and learn what it means to embody Mazzella Companies’ core values (https://lnkd.in/eH45grvy)

Do you have a multiple-point lift? The RUD Chain, Inc. VLBG and VLBG-Plus rotate around a captive bolt, spinning independently of the bolt, always swiveling out to the side with a 360° turn radius. When done with your lift, you can lay it over for a low profile. This lift point is best used in multiple-point lifts. If used as a single pick point, the lift will be slightly off-center. Available in imperial inch sizes or metric. The Metric VLBG-Plus comes with a proprietary ice bolt using harder steel. RUD VLBG Load Ring Bolted ► https://lnkd.in/e-ENrqES _____________________________________________ FREE DOWNLOADS! Lifting and Rigging Best Practices Infographic ► https://lnkd.in/gxWx7QX3 Lifting and Rigging Site Assessment Guide ► https://lnkd.in/ghb4yxuX _____________________________________________ LEARN MORE! How To Select the Correct RUD Lifting Points For Your Overhead Lifts ► https://lnkd.in/gHA7Rpmz What Are The Different Types of Eye Bolts Used for Overhead Lifts? ► https://lnkd.in/ggSG8TMP What is a Hoist Ring? A Look at Different Types, Installation, and Parts ► https://lnkd.in/gwphpGGW Eye Bolts vs. Swivel Hoist Rings: Pros & Cons and Common Uses ► https://lnkd.in/gbQNNUjg How Are Swivel Hoist Rings Inspected and Repaired, per ASME Standards? ► https://lnkd.in/eQD3wMBE Does ASME Require Eyebolts to Have a Stamped Working Load Limit? ► https://lnkd.in/gSkquJH9 _____________________________________________ Schedule Remote or In-Person Rigging Training Here: ► https://lnkd.in/eVjcG8p Contact Mazzella's Rigging Division Here: ► https://lnkd.in/eQEmxQw _____________________________________________ #industrial #lifting #liftingequipment #riggingequipment The Caldwell Group, Inc. Disclaimer: Any advice, graphics, images, and/or information contained herein are presented for general educational and information purposes and to increase overall safety awareness. It is not intended to be legal, medical, or other expert advice or services, and should not be used in place of consultation with appropriate industry professionals. The information herein should not be considered exhaustive and the user should seek the advice of appropriate professionals.

“In life, you have 3 choices. Give up, give in, or give it your all.” – Charleston Parker #motivationmonday

Who should do your warehouse rack inspections? For many, their in-house safety department is more than capable of performing a rack inspection. But recently, the industry is moving towards third-party rack inspections being the standard. Why? Inspecting warehouse racks is an intricate, detailed, and important part of making your operations successful and safe, and having an unbiased, outside perspective will help make sure you’re getting the best inspection possible. This article will dive into important topics, such as:   • What are the Positives of a Third-Party Warehouse Inspection? • What Does a Third-Party Rack Inspection Look Like?   • How Much Does a Third-Party Rack Inspection Cost? • How Long Will a Third-Party Rack Inspection Take? • Are You Ready for A Third-Party Rack Inspection? 📖: https://lnkd.in/etev3s7t

🇺🇸🎆 Happy Independence Day! 🇺🇸🎆 This 4th of July, let's honor the spirit of independence and freedom that defines our great nation. As cranes across the country proudly fly the American flag, let's reflect on the principles of freedom and democracy. Stay safe this 4th of July! When we all return to work, let's continue to build a stronger nation together. 🇺🇸🏗️🦅🗽 _____________________________________________ Contact Mazzella's Rigging Division Here: ► https://lnkd.in/eQEmxQw #FourthOfJuly #IndependenceDay #crane #construction

Here at Mazzella, we are always looking for that next team member that aligns with our core values. So, what are those values? Check out the latest video from Inside Mazzella Companies.

The RUD Chain, Inc. VRS STARPOINT is a star-shaped lift point that spins 360° in force direction. It features a captive bolt, which means it cannot come out of the load during a lift. There is a “key,” which is used just like an Allen wrench. You put the key into the head of the bolt, and then, the bolt into the load. To tighten the lifting point, you rotate it in a clockwise fashion. Once the bolt is tight on the load, you remove the key. The ring will swivel independent of the bolt because the key has been removed. This ensures the bolt will not back out of the load during an overhead lift. These lifting points have been very popular in moving motors, gear boxes, and other places where you only need one lifting point and not four. While the Starpoint can be used in conjunction with four lift points, a lot of times, this product is used for single-point lifts. Additionally, these RUD bolt-on lifting points can be used if you need a point to swivel, or to replace a shouldered eye bolt. RUD VRS STARPOINT https://lnkd.in/ecFybQPG __________________________________________ FREE DOWNLOADS! Lifting and Rigging Best Practices Infographic https://lnkd.in/gxWx7QX3 Lifting and Rigging Site Assessment Guide https://lnkd.in/ghb4yxuX __________________________________________ LEARN MORE! How To Select the Correct Lifting Points For Your Overhead Lifts ► https://lnkd.in/gHA7Rpmz What Are The Different Types of Eye Bolts Used for Overhead Lifts? ► https://lnkd.in/ggSG8TMP What is a Hoist Ring? A Look at Different Types, Installation, and Parts ► https://lnkd.in/gwphpGGW Eye Bolts vs. Swivel Hoist Rings: Pros & Cons and Common Uses ► https://lnkd.in/gbQNNUjg __________________________________________ Schedule Remote or In-Person Rigging Training Here: ► https://lnkd.in/eVjcG8p Contact Mazzella's Rigging Division Here: ► https://lnkd.in/eQEmxQw #industrialmaterialhandlinglift #materialhandling #lifting The Caldwell Group, Inc. __________________________________________ Disclaimer: Any advice, graphics, images, and/or information contained herein are presented for general educational and information purposes and to increase overall safety awareness. It is not intended to be legal, medical, or other expert advice or services, and should not be used in place of consultation with appropriate industry professionals. The information herein should not be considered exhaustive and the user should seek the advice of appropriate professionals.

"In three words I can sum up everything I've learned about life: It goes on." – Robert Frost #motivationmonday

If you use forklifts in your daily operations, forklift booms are a great device to have at your facility. But do you know how to safely use them? For all the benefits they offer, improperly using a forklift boom can lead to catastrophic results: overturned forklifts, injured employees, and thousands of dollars in equipment damage. As a follow-up to our previous article on the positives and negatives of a forklift boom, we will cover four safety tips you can follow to keep your workers safe. 📖:  https://lnkd.in/egxUsWYy

June is National Safety Month 🦺! Created in 1996 by the National Safety Council, National Safety Month looks to spotlight ways to improve and promote workplace safety practices in various industries, so workers can stay safe year-round. This year’s topics include safety engagement, roadway safety, risk reduction, and slip, trips, and falls. As the month wraps up, we’re sharing relevant, informative, and free content we’ve created over the years concerning safety in the lifting and rigging industry, including our: • Rigging Gear Inspection Field Reference Guide https://lnkd.in/ge6UY7GM... • Lifting and Rigging Site Assessment Guide https://lnkd.in/gKVwuHFB... • Top 10 Safety Tips for Working at Height Infographic https://lnkd.in/gc88WG5z... • Job Safety Analysis and Working at Height Risk Assessment Bundle https://lnkd.in/g9KAZE8M... • How to Develop a Working at Height Rescue Plan [Article and video] https://lnkd.in/ggVUsrP8