ReNuke Services

🌟 #Hiring Alert - Immediate Need 🌟 Operations Liaison Lead/Supervisor for our client in Montz, LA for a Fossil Fuel Fired Power Generation Facility. SHIFT: ⏰ Work schedule is 12-hour rotating shift 3-2-2-3 schedule - rotating days and nights DURATION: 📅 6-12+ months, possible conversion to full-time employee MUST HAVES: ➡ Must have 6+years’ experience in a CCGT or fossil fuel fired power generation facility in an Operation or Maintenance position ➡ Serves as the lead on shift and provides work direction to others on shift. Should have completed all the board operator qualifications and is working as the designated lead control board operator. Minimum education required of the position: ➡ Two-year associate degree in industrial Electronics, Instrumentation/Controls or Production/Process Technology or equivalent work experience. Qualifications: 🔷 Curriculum including the following: AC / DC Theory; Programmable Logic Controllers - troubleshooting and logic development; process control valve positioners; water chemistry analytical instrumentation; calibration practices and procedures or other similar coursework and/or experience. 🔷 Must have completed all current qualifications to be a certified control board operator in the designated plant as well as have 6+years’ experience in a CCGT or fossil fuel fired power generation facility in an Operation or Maintenance position or maintenance/electrical experience. To apply send resume to: anna@renuke.com #operations #Louisiana #Fossilfuel #hiring #powergeneration

ReNuke Services is #hiring! I am looking for a Nuclear Mechanical Planner II for our client's nuclear facility in Huntersville, North Carolina! Send your resume to: Becky@renuke.com Job Description: This position is responsible for developing maintenance work documents, administrative controls, specific work instructions, and post-maintenance test requirements to provide instructions to plant personnel to ensure safe and efficient operation of the unit, performance of troubleshooting activities and corrective maintenance in accordance with AD-MN-ALL-0005, UFSAR, technical specifications, vendor recommendations, and environmental compliance guidelines. This position is responsible for preparing and updating work packages to resolve condition reports, routine activities, reported deficiencies, or enhancements to ensure completion within the established deadlines and schedules. Responsibilities: Validates identified component and plant discrepancies identified on work requests. Converts Work Requests (WR) to Work Orders (WO), walks down jobs to identify needed support information. Develops work order tasks for support groups, Post Maintenance Testing (PMT), and provides work instructions. Identifies man-hours for craft corrective and preventative maintenance work packages to meet the "Online" and "Outage" scheduling requirements for the maintenance department. Define procedures, drawings, equipment and materials required to perform work packages. Facilitate package preparation by identifying isolation requirements (if required), scaffold, temporary power tasks, etc. Verify work instructions are adequate and comply with all applicable station procedures. Reviews and plans work order instructions for EC's (Engineering Changes). Identify and request corrections and revisions to the Equipment Data Base, Bill of Materials, Drawings, and Plant Procedures Responsible for the processing of Preventive Maintenance Revision (PMR) PM change assignments requests that are submitted for changes to existing PM's and creation of new PM's. Basic / Required Qualifications: • High School diploma or equivalent • 3 years of work-related experience Desired Qualifications: • 2yr technical degree in Mechanical Specialties (Valves, HVAC, Pumps etc) • Microsoft Office Products • 5 years nuclear maintenance experience or 10 years nuclear plant experience • Self-motivated with a strong job ownership and ability to work independently with minimal supervision • Basic Work Management skill Schedule: Monday-Thursday 4x10 required work time 7-1500 flexibility on either end. #PlannerJobs #NuclearJobs #MechanicalPlanner #NorthCarolinaJobs #HuntersvilleJobs #CharlotteJobs #ReNukeServices #contractjobs #nuclearenergy #Planning #hiringnow

ReNuke Services is #hiring! I am looking for a Nuclear Mechanical Planner II for our client's nuclear facility in Huntersville, North Carolina! Send your resume to: Becky@renuke.com Job Description: This position is responsible for developing maintenance work documents, administrative controls, specific work instructions, and post-maintenance test requirements to provide instructions to plant personnel to ensure safe and efficient operation of the unit, performance of troubleshooting activities and corrective maintenance in accordance with AD-MN-ALL-0005, UFSAR, technical specifications, vendor recommendations, and environmental compliance guidelines. This position is responsible for preparing and updating work packages to resolve condition reports, routine activities, reported deficiencies, or enhancements to ensure completion within the established deadlines and schedules. Responsibilities: Validates identified component and plant discrepancies identified on work requests. Converts Work Requests (WR) to Work Orders (WO), walks down jobs to identify needed support information. Develops work order tasks for support groups, Post Maintenance Testing (PMT), and provides work instructions. Identifies man-hours for craft corrective and preventative maintenance work packages to meet the "Online" and "Outage" scheduling requirements for the maintenance department. Define procedures, drawings, equipment and materials required to perform work packages. Facilitate package preparation by identifying isolation requirements (if required), scaffold, temporary power tasks, etc. Verify work instructions are adequate and comply with all applicable station procedures. Reviews and plans work order instructions for EC's (Engineering Changes). Identify and request corrections and revisions to the Equipment Data Base, Bill of Materials, Drawings, and Plant Procedures Responsible for the processing of Preventive Maintenance Revision (PMR) PM change assignments requests that are submitted for changes to existing PM's and creation of new PM's. Basic / Required Qualifications: • High School diploma or equivalent • 3 years of work-related experience Desired Qualifications: • 2yr technical degree in Mechanical Specialties (Valves, HVAC, Pumps etc) • Microsoft Office Products • 5 years nuclear maintenance experience or 10 years nuclear plant experience • Self-motivated with a strong job ownership and ability to work independently with minimal supervision • Basic Work Management skill Schedule: Monday-Thursday 4x10 required work time 7-1500 flexibility on either end. #PlannerJobs #NuclearJobs #MechanicalPlanner #NorthCarolinaJobs #HuntersvilleJobs #CharlotteJobs #ReNukeServices #contractjobs #nuclearenergy #Planning #hiringnow

✨ #Hiring Alert ✨ Looking for a Senior Project Controls Scheduler for our client in Charlotte, NC! On top of having exceptional experience in Primavera P6. The ideal candidate should also have the following: ✔ Graduation from a four-year college or university - business, finance, project management, engineering, technical, or equivalent. ✔ Minimum of 7 years of project controls experience. ✔ A minimum of 11 years of project controls experience in lieu of a degree. ✔ Proficient in project controls principles. ✔ Proficiency/Expertise with project management/project controls concepts To apply: send resume to anna@renuke.com #hiring #scheduler #charlotte #northcarolina #P6

ReNuke Services is HIRING! I'm looking for a Project Controls Cost Analyst II for our client's site in Charlotte, North Carolina for a long term project! Email me your resume for immediate consideration! Becky@renuke.com https://lnkd.in/erXxgjbp ***No C2C. Must be presently authorized for work in the United States without need for sponsorship.*** #ReNukeServices #Hiring #HybridJobs #ProjectControlsjobs #CostAnalystjobs #NorthCarolinaJobs #UtilityJobs #Excel #Maximo #CostAnalysis #ProjectControls #ContractJobs #CharlotteJobs

🌟 #Hiring Alert 🌟 Looking for an Operations Liaison in Orange, TX! Are you a Control Room Operator with the right experience to ensure operational stability? 🔹Minimum Qualifications: - High school diploma, GED, or equivalent work experience - Desired: 2-year Process Technology Degree 🔹Minimum Experience: - At least 5 years of power plant experience - Desired: 10 years of power plant operations experience Operators work 12-hour shifts, rotating between day and night. 💡 Interested? Send your resume to anna@renuke.com or apply directly here: https://lnkd.in/eqEVzyt8 #OperationsLiaison #ControlRoomOperator #PowerPlant #JobOpportunity

ReNuke Services is a professional staffing, projects and consulting company based in Oak Ridge, Tennessee that supports large commercial energy and nuclear clients, the Department of Energy, and the Department of Defense through contract roles. We staff throughout the country for hybrid and on-site positions! I am collecting resumes for upcoming roles!! If you are experienced in any of the following roles within the realm of the nuclear or utility fields, please send me your resume and I will contact you about current and upcoming opportunities! *Must be presently authorized to work in the United States – we do not provide sponsorship. * Email your resume to: Becky@renuke.com ·       Administrative/Executive Assistant ·       CAD Operator ·       Civil Design Engineer ·       Construction Manager (Utilities) ·       Cyber Security ·       Digital Design Engineer ·       Document Control/Management ·       Electrical Design Engineer ·       Engineering Support ·       Engineering Technologist ·       Environmental Specialist ·       Estimator ·       GIS Technician ·       GIS Analyst ·       Health and Safety Specialist ·       I&C Design Engineer ·       Implementation Lead ·       Mechanical Design Engineer ·       Outage Coordinator ·       Nuclear Contract Administration ·       Nuclear Procurement ·       Planner ·       Project Controls Cost Analyst ·       Project Controls Scheduler ·       Project Manager ·       Radiological Control Technician (RCT) ·       Radiological Waste Manager ·       Radiological Waste Shipper/Broker #ReNukeServices #Hiring #HybridJobs #OnSiteJobs #RemoteJobs #NorthCarolinaJobs #SouthCarolinaJobs #OhioJobs #IndianaJobs #IdahoJobs #FloridaJobs #TennesseeJobs #NewMexicoJobs #CaliforniaJobs #NewYorkJobs #VirginiaJobs #DOE #DOD #UtilityJobs #NuclearJobs #Energy #ContractJobs

I am #hiring for a Senior Project Controls Cost Analyst position in St. Petersburg, FL! If you've ever dreamed of moving to #Florida 🌴, this could be your opportunity! ✔ Check out further details: https://lnkd.in/eXWKh3jR 📧 Apply today by emailing anna@renuke.com. #hiring #florida #cost #renukeservices