Bravo Mining Corp.’s Post

Sayona Mining Limited (SYA-ASX; OTC:SYAXF) Moblan Drilling Reveals Further High-Grade Intersections On June 13, 2024, Sayona reported results from 34 new drillholes totalling 7,853m at its Moblan Lithium Project demonstrating the potential of a single, large continuous orebody. Recall Sayona had disclosed on May 27, 2024, results from 94 new drillholes totalling 20,735m (https://lnkd.in/dsTU93RW). The Moblan Lithium Project is located ~85km from the Cree (First Nations) community of Mistissini and is located within just 300 m of the Route du Nord. These latest results include up to: 41.8m @ 1.44% Li2O from 206.2m in drillhole 1331-23-515 and 40m @ 1.37% Li2O from 253m in drillhole 1331-23-516 on the New South Pegmatites (East); 39.55m @ 1.63% Li2O from 38m in drillhole 1331-23-678 on the New South Pegmatites (West); and 44.95m @ 1.56% Li2O from 81.05m in drillhole 1331-23-689 and 46.75m @ 1.49% Li2O from 197.35m in drillhole 1331-23-689 on the Moleon Pegmatites. The new drilling results illustrate the potential connection between the Main, South, New South, Inter and Moleon sectors within a single extensive lithium mineralised system and shall potentially have a positive impact on the geological continuities of an updated mineral resource estimate. The footprint of the Moblan mineralised system now extends over ~2.3km E-W, ~1.2km N-S and to depth of ~450m from surface and bounded by a NE-trending shear zone in the west. See end of:  https://lnkd.in/gtgiQ7zV   https://lnkd.in/d3TsDDSz #quebec #jamesbay #moblan #lithium #drilling #sayona

Bravo Mining Corp. announced this morning another set of very encouraging drill results, including one with the highest grade/thickness to date (59.9m at 4.80g/t PGM+Au from 0m) and another on the same section with the thickest mineralized drill intersection (140.7m at 1.25g/t PGM+Au from 5m); both starting right at surface ! “Drilling results at Luanga continue to demonstrate upside, notably with DDH24LU240 returning the highest grade/thickness to date. Additionally, DDH24LU038 stands out as the thickest mineralized drill intersection, extending over 140m from surface,” said Luis Azevedo, Chairman and CEO. “Drilling continues to show increasing nickel sulphide grades at depth in the Central Sector, while the North Sector shows widening of multiple zones of mineralization, which has the potential to significantly  improve  ratios of near surface mineralized to unmineralized material.  These positive factors strengthen confidence for on-going drilling.” There are a further two zones of mineralization stratigraphically below, and all three zones are almost entirely within 150m of the surface, which augurs well for potential future MRE updates at these shallow depths. See Section in the picture. #bravomining #pgm #palladium #platinum #rhodium #nickel #luanga #carajas Alexandre Penha

Recent drilling by Sunstone Metals Limited (ASX:STM) at the Limon gold-silver discovery in southern Ecuador has further expanded the Central Shoot and uncovered new mineralised zones. The findings bolster the company’s work to establish a maiden mineral resource estimate at Limon. Recent drilling has continued to yield strong results, with key highlights including 50.85 metres at 1.43 g/t gold equivalent (AuEq) from 135.15 metres in hole LMDD051. This intersection includes a high-grade segment of 5 metres at 5.81 g/t AuEq, with very high silver grades reaching up to 1,610 g/t over a 0.45-metre interval. Meanwhile, drill hole LMDD048 intersected 16.35 metres at 1.06 g/t AuEq from 45 metres, further expanding the Central Shoot and identifying new shallow mineralised areas south of the initial discovery. More at #Proactive #ProactiveInvestors #STM #ASX #Mining #Gold #PreciousMetals http://ow.ly/sCEc105GgZ9

Strickland Metals (ASX:STK) has outlined a new primary mineralised structure at its Dusk til Dawn resource within its Yandal Gold Project in Western Australia through its expanded aircore drilling program. https://bit.ly/3OPFZeZ #miningcomau

Strickland Metals (ASX:STK) has outlined a new primary mineralised structure at its Dusk til Dawn resource within its Yandal Gold Project in Western Australia through its expanded aircore drilling program. https://bit.ly/3OPFZeZ #miningcomau

Coverage stock Talisman Mining (ASX: TLM) has provided an important update with respect to ongoing exploration activity at its Lachlan Copper-Gold Project in NSW. Current activity is focused on the Durnings Prospect, where TLM has today released its latest drilling results that have seen the company’s share price climb by 25%. The Lachlan Project spans the Canbelego-Mineral Hill Volcanic Belt between Condobolin and Canbelego in NSW, being prospective for large scale porphyry copper-gold and VMS style copper-lead-zinc-silver deposits. Significant mineralised zones have been logged from the first follow-up diamond hole, whilst several step-out RC holes have potentially intersected the Upper mineralised zone along strike - recording anomalous sulphur, zinc, lead and copper readings from pXRF field analysis. Collectively, these results demonstrate that Durnings is emerging as a significant greenfields base and precious metal discovery. The current work program will play an important role in generating an accurate picture of the orientation and style of the lead-zinc-silver-copper-gold sulphide mineralization. TLM’s funding position is boosted by its Wonmunna Iron Ore Royalty, where since the commencement of production in March 2021, TLM has received total royalty payments of $15.1 million. As of 31 December 2023, Talisman held $7.9 million in cash and investments. #copper #exploration #mining #commodities #resources #NSW #equities #ausbiz

#ICYMI Last week Anglesey Mining announced a drilling update for the Northern Copper Zone of its Parys Mountain project on the Isle of Anglesey. 🚨 Full RNS update here: https://bit.ly/3Nsbtak 📢 Key Highlights: ▪️Drilling of first drill hole into the Northern Copper Zone (NCZ001) was completed on 11th December at a depth of 635 metres, broadly in-line with the Company’s expectations. ▪️Drill hole NCZ001 was modelled to intersect two zones of potential sulphide mineralisation – the first between 365 – 510 metres, relating to the Northern Copper Zone; and the second between 610 – 620 metres interpreted to be an extension of the high-grade Garth Daniel Zone. ▪️Visual logging of NCZ001 suggests two zones of sulphide mineralisation were intersected with the Northern Copper Zone. ▪️As expected, the interpreted Northern Copper Zone has varying levels of sulphide accumulation. This was also the case with drilling in the 1970’s with the nearest hole to NCZ001 intersecting two higher grade zones of 22.9m @ 1.20% Cu (1.42% CuEq) and 85.3m @ 1.13% Cu (1.40% CuEq) within a broader zone of 146m @ 0.98% Cu (1.20% CuEq) – no gold assaying was conducted on that drill hole. ▪️The lower zone of sulphide accumulation between 560 – 586 metres demonstrates areas with very high levels of chalcopyrite, as highlighted in the picture below. ▪️Logging and sampling of NCZ001 has been ongoing since the commencement of drilling and there are c.300 samples now ready for dispatch to the assay lab, with results currently expected to be received during Q1 2024. 🚨 Full RNS update here: https://bit.ly/3Nsbtak #AngleseyMining #AYM #ParysMountain #Mining #Copper

Successful Humpback Drilling Program Completed - Fiesta copper mineralisation zone significantly extended Highlights: • Fiesta intercept of 45m @ 1.0 % Copper Equivalent reported from hole 23FIERC02. • Intercept of over 0.5% Cu over 750m east of any previous intercept on the main Fiesta horizon in 23FORRC03. • Intercept of over 0.5% Cu 500m west of any previous intercept on the main Fiesta horizon in 23FIERC07. • New understanding of mineralisation at Fiesta significantly extends the known length of the mineralised horizon and the potential size of the deposit with a number of new targets defined. • Encouraging anomalous Copper and Silver intercept at first ever drilling at Blowhole prospect on interpreted D’Kar contact in 23BHRC07. • Number of new areas planned for drilling on Humpback tenements. “The Fiesta deposit is continuing to deliver positive Copper intercepts at significant step outs on the main horizon which is very encouraging for the potential size of the Fiesta Copper system and the surrounding region under shallow cover. The whole 100% owned Humpback project, supported by the drilling at Fiesta and Blowhole provides numerous favourable structural settings for large deposits that have never been previously drilled.” Chief Geologist Bruce Hooper James Thompson David Prentice #ASX #Copper #Mining #NRX

#ASXNews Colosseum Delivers More High-Grade Gold Intercepts Dateline Resources Limited is pleased to announce further significant #gold values from #drilling results at the Colosseum Gold Mine in California. The Company currently has a diamond and RC rig operating in the south pit undertaking infill and extensional drilling. • Results received from diamond and reverse circulation drilling within the south pit, comprising infill and extensional drilling • Final results from diamond drillhole CM24-16 received, increasing the intercept from 88m to 104.7m including 104.7m @ 3.65g/t Au from 77.23m • First results from the RC program have been received, with the following significant results: •RC24-003 25.9m @ 1.92g/t Au from 57.91m including 3.05m @ 3.05g/t Au from 57.91m •RC24-004 3.05m @ 1.92g/t Au from 86.86m 3.05m @ 2.95g/t Au from 94.48m •RC24-008 74.7m @ 4.27g/t Au from 77.72m  including 27.4m @ 7.82g/t Au from 88.39m • Updated Mineral Resource Estimate underway, with an expected release in early June to be followed by mining studies Commenting on the study, #DTR’s Managing Director, Stephen Baghdadi, stated: “These drill hole results are further confirmation that the Colosseum project has delivered consistent gold grades in a wide zone. “With the updated MRE expected in the next few weeks, we plan to move quickly to determining a mine plan to extract value for our shareholders.” See the full announcement: https://loom.ly/H2NzqUA #DatelineResources #MiningNews #ASX

We are pleased to announce an exceptional intersection of high-grade copper at our Lana Corina Project in Chile! Results from ongoing drilling have returned 298m @ 0.98% CuEq from near-surface high-grade copper mineralisation.   Highlights ✅ Longest intersection of high-grade copper at Lana Corina ✅ Diamond drillhole CMLCD014: 298m @ 0.98% CuEq from 90m, open at depth ✅ Two wide, higher-grade zones:    - 78m @ 1.24% CuEq from 200m    - 68m @ 1.14% CuEq from 320m ✅ Drilling continues, currently at 700m ✅ Assay results for the next 242m expected in 2-3 weeks   Our Managing Director, Max Tuesley, commented: “This intersection is exceptional in terms of both length and grade, clearly demonstrating that the Lana Corina geological system is something very special. Results returned to date confirm the longest ever mineralised intersection at the Project. Importantly, these results represent just the upper 388m of the hole. Drilling is ongoing with the hole currently at a downhole depth of 700m. The extensive and rich mineralisation intersected so far, supports our strategy that additional drilling will lead to substantial increases in the Project’s scale. This is an exciting time for both our Company and our Shareholders, with what is emerging as a significant copper system in the Coastal Cordillera of Chile.”   Read the full announcement here ➡️ https://bit.ly/3VnU99g   Stay tuned for more updates as we continue to explore and expand this promising project!   #CulpeoMinerals #CPO #Copper #Mining #Chile #ASX #HighGradeCopper #MineralExploration #LanaCorina