Another DoorKing wedge barrier ready for shipment. This 12-Ft wedge barrier is certified to ASTM F2656 and carries a PU-30-P1 crash rating.
DoorKing®, Inc.’s Post
More Relevant Posts
-
checking clearance bettwen bearing outer race and housing for rocker arm bearing (losche vertical raw mill). we find out that there is clearance in this point. l think one of the reasen can be contact bettwen roller head and table for long time as roller corrosion and taking a cylindrical shape . what do you think? what is the reasen?
To view or add a comment, sign in
-
4/5🔹ASF-2 (Abutment screw fracture 2)🔹 The screw shank is the cylindrical length of the screw that extends from the underside of the head to the first thread. This is the most unsupported and no contact area of the abutment screw. Breaking of the screw is not that common. A bur is used, with the lateral blades reduced and just the apical blades rotating slowly counter-clockwise, engaging the broken part, to remove the screw. To be continued…
To view or add a comment, sign in
-
❓ Are your runner extensions and dirt traps actually trapping anything❓ In this video a traditional runner extension and two different dirt traps are shown using tracer particles with densities similar to undesirable elements that make their way into our gating systems like sand particles, slag and inclusions. Using this result it is easy to see which dirt trap is actually doing what it was designed to do: trap the garbage that we don’t want in our castings. The end result of a dirt trap that is working properly? Reduced defects, lower scrap rates and lower overall costs.
To view or add a comment, sign in
-
POST-INSTALLED ANCHOR BOLTS STRENGTH ACCORDING TO ACI-318-08 Downloads https://lnkd.in/dqpTNBiX
To view or add a comment, sign in
-
Check out this document with Rosemount 319 Flushing Rings for Diaphragm Seals.
To view or add a comment, sign in
-
Nickel plated brass adaptor -Material: Brass with nickel plated -Size: 20mm 25mm 32mm #brassadaptor #nickelplatedadaptor
To view or add a comment, sign in
-
Marketing Manager at Guangxi Nanning Orexis Mining Machinery Co.Ltd | Crusher| Ball Mill| Drum Washer| Feeder
Chute Feeder The structure of Chute Feeder is simple. It mainly consists of eccentric wheel of drive device, connecting rod, to-and-fro base plate, support wheel, bin, funnel and flange for connecting the storage bin etc. It can be not only installed on the ground but also hoisted on the discharging gate of storage bin.
To view or add a comment, sign in
-
The elastic seal in a flexible joint deforms accordingly under the pressure of the nut and gland to accommodate tube expansion, contraction or deflection.
To view or add a comment, sign in
-
Rubber Belt Vulcanizer DSLQ-S using at-site: 1. Belt width: 1200mm 2. Heating plate size: 450*1425mm 3. Splice angle: 22°
To view or add a comment, sign in
2,486 followers