Educave Training Academy’s Post

Transcript

My blockers are responsible for the collection, analysis and interpretation of data obtained from drilling mud and cuttings. Some at loggers have degrees in geology or engineering, while others may only have a high school diploma combined with the previous experience in oil field, such as working on a drilling rig. They often work with geologists, drilling engineers and other professionals on the drilling Creek to provide important information on the wells, drilling progress and geological formations encountered. My login is the process of analyzing and monitoring the drilling mud and cuttings from the well during the drilling process. During math is the fluid which is pumped down the drill pipe and back up the labor to control the whole pressures, lubricate the wallboard and help bring cuttings from the bid to the surface, keeping the wallboard clean. The mat also provides critical information about the formation being drilled, such as its lithology, porosity, permeability, and hydrocarbon content. Some of the responsibilities of a mud loggers are collection and analysis of drilling mud and cuttings. Mud loggers collect samples of drilling mud and cuttings during the drilling process. This rock samples OK things are usually taken from the shell shaker. They analyze these samples to identify the rock types and their properties. The frequency at which the raw samples are caught and analyze depends on the formation's complexity and drilling speeds. This means the mud loggers may only work several hours during their shift and spend the rest of the time waiting. This is also quite a bit of downtime during drill bit changes or when something goes wrong during the drilling process. Another possibility of monologues this gas monitoring mythologies are use specialized tools to detect and measure the presence of hydrocarbon gases in the mud. This information can be used to determine the presence of oil and gas and information and to ensure the safety of the drilling operation. MAD lockers are also responsible for maintaining detailed records of their observations and analysis using mud logs. Those reports typically contain information on a drilling speeds or rate of penetration, rock composition, physical properties, and information about the hydrocarbons detected by gas chromatography. They also keep everybody updated on a drilling rig about their information they discover from their rock analysis, and they communicate those findings and interpretations to geologists, drilling engineers and other team members to help optimize training her process. Often mud loggers work alongside Tulsa geologists and provide them with the rock samples when needed. Both office and wallside geologists use mudlogging reports to perform more in depth well drilling analysis. Depending on the wealth complexity well side, geologists might sometimes perform all the duties of the mudlogger. Some new grad graduates with degree in geology started working on in the oil and gas industry as a mudlogger before becoming on site or office geologists. This allows them to gain more filtering experience and understanding of the entire drilling process, making it easier for them to transition to other roles. After a few years, most people try to avoid working as mud loggers for more than a couple of years, mainly because salaries are generally not very high comparison to other oil field positions. Other common issues when working as a mudlogger. Mandatory overtime, little room for advancement, and often poor living conditions. Most might lower stay in the cap during the drilling operation and work 12 hour shifts. Rotation schedules for mad loggers. Can vary ranging from two weeks on and one week off to working the entire time the walls being drilled which should be more than a month. And as you can see, this is not going to work for everyone, so you need to decide for yourself if you want to work at smart logger or if it's not something you're interested in.