LMI Solutions Ltd’s Post

Some of our client may encounter this question, hope this may help. Let's have a check on this 👇 👇 👇 About lubricating oil and grease used in cardboard line 👉 1、Hydraulic oil: It is mainly used for the hydraulic drive of the shaftless raw paper frame, the pressure of corrugated roll of the single-sided machine, the adjustment of the size of the pressure roll as well as the fixation of the machine and the lifting and driving of the gravity roll of the hot plate. 👉 2、Gear oil: mainly used for gear lubrication and cooling of the gear transmission box and main drive gear box of the single-face machine. 👉 3、Light oil: mainly used for lubrication of oil cup of hot plate department, cooling department, computerized slitting machine and computerized cross cutting machine. 👉 4、Ordinary grease: mainly used for lubrication of bearings in shaftless raw paper frame, automatic splicer, gluing machine, automatic stacking machine and so on. 👉 5、High temperature grease: mainly used for the lubrication of single-face corrugator. The most important part of the entire line is the lubrication of the corrugator rolls and pressure roll bearings of the single-sided machine, which must be lubricated with high-quality high-temperature lubricating grease. In addition, it is recommended to use a good high-temperature grease for the preheating cylinder. rayco HTW-3102 high-temperature grease meets the high-temperature requirements of the corrugator and is effective in preheating cylinders, while being inexpensive, thus lowering the running costs of the enterprise. #corrugator #paperboardproduction #cartonmachine #machinemaintenance #lubricatingoilorgrease # #corrugatedpaperboard #boxmaking #packagingmachine #packagingmachinesupplier #packagingsolutions

🔗 𝗖𝗼𝗻𝘃𝗲𝘆𝗼𝗿 𝗧𝗼𝗼𝘁𝗵 𝗖𝗵𝗮𝗶𝗻 𝘀𝗽𝗲𝗰𝗶𝗮𝗹 𝘀𝗼𝗹𝘂𝘁𝗶𝗼𝗻𝘀 At Renold Chain Europe, we understand that no two days -or applications-are the same. That’s why we specialise in custom-made inverted tooth conveyor chains, tailored to meet the diverse requirements of your operations. 𝗪𝗵𝗮𝘁 𝗺𝗮𝗸𝗲𝘀 𝗼𝘂𝗿 𝘀𝗼𝗹𝘂𝘁𝗶𝗼𝗻𝘀 𝘂𝗻𝗶𝗾𝘂𝗲? ✔️ Versatile design: Workpieces can sit directly on the chains or on specially integrated pallets or carriers. ✔️ Extensive options: With over 500 different driver link plates available, we can meet the needs of even the most complex applications. 𝗦𝗼𝗺𝗲 𝗲𝘅𝗮𝗺𝗽𝗹𝗲𝘀 𝗼𝗳 𝗰𝘂𝘀𝘁𝗼𝗺 𝗱𝗲𝘀𝗶𝗴𝗻𝘀: - Chains with ring links or forked plates to carry cross-bars. - Link plates with ridged backs for wood transport. - Special link plates for fastening mold halves on packaging lines. - Inverted tooth chains with parts from other manufacturers, like massive driver blocks for cycle lines. - Welded disks for precise plate conveyors. Whatever your industry, Renold’s custom conveyor chain solutions are designed to provide reliability, precision, and long-term performance. 💡 Need a tailored solution for your operation? 📥 𝗗𝗼𝘄𝗻𝗹𝗼𝗮𝗱 the "Special Solutions for Conveyor Chain" Datasheet here >> https://lnkd.in/d5VgVd9n

💻 Large, heavy, and irregularly shaped items are increasingly being purchased online rather than in person. This poses challenges to logistics systems, as they can’t seamlessly enter the sorting system. Instead, they are often manually picked and set aside to be transported and sorted separately. 💡 To handle these items while reducing the risk of personnel injuries, our 𝗥𝗼𝗹𝗹𝗲𝗿 𝗣𝗹𝗮𝘁𝗲𝘀 offer an efficient solution. Molded plates are ideal for standard, straight-run gravity chutes, whereas machined plates are cut to size and allow angled positioning of rollers. ▪ The roller plates can handle package weights up to 1000kg/m2. ▪ Made with a polypropylene (PP) main plate and polyoxymethylene (POM) rollers, they offer good wear resistance against various materials. ▪ They are also made in sections and have easy-to-connect interlocking tabs to facilitate installation and replacement if damaged. Instead of replacing an entire conveyor, operators can swap out individual plates and rollers – minimizing the risk of injury and reducing downtime anywhere 𝗳𝗿𝗼𝗺 𝟲 𝗱𝗮𝘆𝘀 𝘁𝗼 𝟲 𝗵𝗼𝘂𝗿𝘀! 👉 More information about our roller plates at: https://lnkd.in/gTRShuHF #Logistics #Efficiency #Safety

We recently had a chance to collaborate with a fantastic stainless steel flange producer that reminded me why I love what we do. It's not just about the products we offer; it's about the stories we create together with our clients, tackling challenges and finding solutions that really make a difference. This partnership started with a challenge that many in the industrial field might find familiar. The team was dealing with some unique hurdles in their production process, especially due to the specific nature of their stainless steel plates. These plates, 1.5 mm thick with a slight curve, required a delicate touch to ensure the quality their customers expected, and the frequent staffing changes weren't making things any easier. Seeing the situation, we suggested trying out our non-woven abrasive belts. These belts are a bit different from the norm, designed to be less aggressive and more forgiving on delicate surfaces, making them a perfect match for the stainless steel sheets in question. The outcome was amazing. The production process became smoother, more efficient, and significantly less resource-intensive. It's not just about the numbers, though they certainly were impressive—from a 20% reduction in material consumption to saving up to 70% in labor time. It's about how much easier and more predictable the process became, ensuring quality and consistency across the board. This experience wasn't just a business transaction; it was a shared journey towards solving a problem, learning, and growing together. It’s these moments that remind me why we do what we do at Eurol. We’re here to offer more than just products; we’re here to build relationships, understand challenges, and work together towards meaningful solutions. And when we can do that, everyone wins.

SS Wire mesh spiral belt from Twentebelt - Metal Conveyor Belts landed in our warehouse today. Over 200mtrs of 700mm wide SS belt, for an upgrade on an existing ambient cooling spiral. This belt has no welded rods - The bending of the cross rod and the way it locks into the connection link, form the ideal drive surface, reducing the chance of damaging the drum and has eliminated major reasons for belt problems such as weld breakage, sharp welds damaging the cage bars, cross rod breakage next to the weld, tented inside links due to broken welds and protruding rods. What this means for the user is - LESS MAINTENANCE and improved productivity. Looking to improve your product cooling process - give us a call 0418 997 156. info@flexcam.com.au www.flexcam.com.au - www.twentebelt.com FlexCAM Pty Ltd Twentebelt - Metal Conveyor Belts #foodprocessing #productionimprovement #spiralbelting #wiremeshbelt #food #foodindustry #nowelds

What’s your biggest challenge with laminating? A. Maintaining supply levels (pouches/rolls) B. Training staff to use the machines C. Managing wear and tear on equipment D. Finding eco-friendly laminating options   E. Rising laminating costs   F. Declining customer base #laminatingmachines #mybinding

Boosting Your Metal Fabrication Shop Strategies In today's market, staying ahead in metal fabrication requires a multi-faceted approach. Moore Machine Tools offers valuable insights in our recent blog post on how to upgrade your shop for peak performance. Key takeaways include: Invest in advanced machinery Streamline workflow Implement robust quality control Optimize material management And more Read more here https://lnkd.in/eFXKCuzx #metalfabrication #manufacturing #shopfloor #productivity #efficiency #qualitycontrol #safety #sustainability #businessgrowth #mooremachinetools

I recently had a chance to collaborate with a fantastic stainless steel flange producer that reminded me why I love what we do. It's not just about the products we offer; it's about the stories we create together with our clients, tackling challenges and finding solutions that really make a difference. This partnership started with a challenge that many in the industrial field might find familiar. The team was dealing with some unique hurdles in their production process, especially due to the specific nature of their stainless steel plates. These plates, 1.5 mm thick with a slight curve, required a delicate touch to ensure the quality their customers expected, and the frequent staffing changes weren't making things any easier. Seeing the situation, we suggested trying out our non-woven abrasive belts. These belts are a bit different from the norm, designed to be less aggressive and more forgiving on delicate surfaces, making them a perfect match for the stainless steel sheets in question. The outcome was amazing. The production process became smoother, more efficient, and significantly less resource-intensive. It's not just about the numbers, though they certainly were impressive—from a 20% reduction in material consumption to saving up to 70% in labor time. It's about how much easier and more predictable the process became, ensuring quality and consistency across the board. This experience wasn't just a business transaction; it was a shared journey towards solving a problem, learning, and growing together. It’s these moments that remind me why we do what we do at Eurol. We’re here to offer more than just products; we’re here to build relationships, understand challenges, and work together towards meaningful solutions. And when we can do that, everyone wins.

Our #extrusiontooling for #foodprocessing features balanced flow design to increase product quality and reduce waste Food Manufacturing. Precise temperature control allows food to be manufactured at high and low temperatures, while custom dies and tooling easily manufacture a variety of products. #GuillTool excels in the machining, welding and assembly of stainless steel dies, the standard in the #foodindustry. https://lnkd.in/gxY6xQhD #foodproducts #extrusion #ProductQuality

Cold Jet’s dry ice blasting systems have helped packaging moulders meet stringent productivity demands. Our systems help moulders clean faster, better and more economically, increasing production capacity and improving product quality. Mould cleaning times can be reduced up to 75% with Cold Jet. Dry ice cleaning technology allows moulds, lock rings, cores and gate inserts to be cleaned without the disassembly of the stripper plate and while the mould is still in the press. The system also cleans blow moulding machines, pelletizing equipment, conveyor belts and glue machines. Clean mould cavities and vents are a major concern for plastic part manufacturers in maintaining today’s high-quality standards. The build-up of unwanted surface residue from either the product mix itself, mould releases or the labelling process can create various problems, ranging from product release (“knock out”) to inferior product quality and possible tool damage. Flash on the product also creates challenges for manufacturers. Mould halves leave a parting line in the final product, and that parting line, or flash, must be removed for product quality. Cleaning with Cold Jet Dry Ice Blasting Technology Provides: ✔️No secondary waste ✔️Reduced cleaning time (up to 80%) ✔️Increase in Quality standards ✔️Clean in-place, no cool down, with minimal disassembly ✔️A non-abrasive clean that won’t damage substrates ✔️Non-conductive process ✔️Media entrapment elimination ✔️Increased operator safety ✔️An environmentally responsible clean 𝐖𝐚𝐧𝐭 𝐭𝐨 𝐤𝐧𝐨𝐰 𝐦𝐨𝐫𝐞 𝐚𝐛𝐨𝐮𝐭 𝐨𝐮𝐫 𝐃𝐫𝐲 𝐈𝐜𝐞 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠 𝐓𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲? 𝐂𝐚𝐥𝐥: ✆ 𝟏𝟑𝟎𝟎 𝐂𝐎𝐋𝐃𝐉𝐄𝐓 / +𝟔𝟏𝟐 𝟗𝟔𝟎𝟎 𝟗𝟓𝟕𝟎 𝐄𝐦𝐚𝐢𝐥: 𝐢𝐧𝐟𝐨@𝐜𝐨𝐥𝐝𝐣𝐞𝐭.𝐜𝐨𝐦.𝐚𝐮 #ManufacturingIndustry #ColdJetAustralia #DryIceBlasting