Mitey AV’s Post

How are broadside arrays of directional microphones affected by the spacing of the microphones and the frequency of the sound? Our article, "Exploring Broadside Arrays of Directional Microphones", discusses how a broadside array of directional microphones has improved directionality over a broadside array of omnidirectional microphones. Our interactive chart, which allows you to select from four different microphone polar patterns and a wide range of microphone spacing, provides a fun way to learn about the science of sound. The interaction between spacing, frequency, and microphone polar pattern can produce some very interesting results! Check it out here: https://lnkd.in/ezuKpn8P #soundskrit #mems #microphone #directional #frequency #broadsidearray #omnidirectional #polarpattern #audiohub #article #interactive #interactivecontent #interactivelearning

Do you have a mix of WIRELESS transmitters but not always the matching mic connector to work with them? If you stock specific mics for each transmitter type, this can be costly. It can also cause delays and be a challenge when managing your mic inventory. With our system of proprietary X-connectors for our SERIES8 microphones, audio teams can switch from wireless pack to wireless pack simply by interchanging the X-connector on a Point Source Audio SERIES8 microphone. No more searching for the right mic or going without. See SERIES8 Mic Models: https://lnkd.in/g5Cfccss Changing the X-connector takes seconds, making it convenient and cost-effective for any production team or rental company that needs quick access to a compatible microphone. #proaudiotechnology #audio #audioengineer #audiotech #soundengineers #wirelessmicrophone

Close miking an instrument is often considered to be a compromise to the instrument’s true acoustic sound. An instrument’s sound is usually designed to be experienced at a distance so that all the different elements of the sound are naturally blended into a perfect harmony. Yet often, mounting a microphone directly on the instrument is the most practical solution. Finding and placing the microphone in the instrument’s sweet spot – or your preferred location, can be a challenge. Keeping it there can be even more challenging, especially if the instrument is moved. For this reason, close miking requires a dependable mounting solution. We're diving into hihats and cymbals specifically in the below guide. #dpamicrophones #dpamics #microphone #microphones #proaudio #professionalaudio #audioengineering

When recording vocals, there are many different aspects to consider when it comes to the microphone. For instance, transducer principles, directional characteristics, proximity effect, diaphragm materials, sensitivity to handling and wind and dynamic range. All of those aspects matter, and we cover them in the below Mic Uni article. But perhaps the first question to answer is: "Do you consider the microphone a tool or an instrument? Should the mic add something to the voice or should it reproduce the sound?" #dpamicrophones #dpamics #microphone #microphones #proaudio #professionalaudio #audioengineering

Introducing the AIR TWS Magnetic Bluetooth Ultra-Slim Earphones are currently the thinnest, custom-designed, concealed clip-on magnetic wireless earphones available in the market, seamlessly fitting onto the back of your mobile phone. Back this project and get an award (The product) Back or bledge mean you will support this project with money to help to create this product to bring it to the world. Or you can back without getting any award. If you truly believe that this project deserves your support and you believe in it ,then don’t hesitate to support and back it. Introduction: How to Back or pledge? How to get the award? Read carefully 1) When you click on the link below, you will find more details about the project, READ CAREFULLY AND UNDERSTAND IT (about the project). 2) Go to the right side of the page, you will find the award section, each award has different details, READ CAREFULLY, click on the one you like. 3) Keep in your mind that each award has different BACK/PLEDGE money amount to support. 4) Follow the introduction in the next page. 5) Add the information card. 6) Your card WILL NOT BE CHARGED until end of the PROJECT DURATION END (28/04/2024). (you will get updated). 7) Your award will be shipped according to the schedule. 8) During and after the project duration time, you can go to comment section and ask the owner any question, and check other backers comments. 9)You can back up without account, it’s optional if you want to create an account in kickstarter to become a backer. 10) You can cancel your back anytime. Link: https://lnkd.in/d46pMdE5 #earphone #wirless #magnetic #bluetooth #earbuds #wirlessearbuds #music

"Transitioning to the new Portacapture X8 today was a natural evolution in my use of Tascam products, always impressed by the quality of the microphones. You don’t change a winning formula. The new user interface is surprisingly simple, and the presets offered are very useful (a big surprise for the ASMR mode to capture fine and precise textures)." -GHOST IN THE LOOP Learn more > https://lnkd.in/gbhZhRAv #TASCAM #portablerecorder #voicerecorder #dictationrecorder #proaudio #multitrack #audiovideo #audiointerface #contentcreator #fieldrecorder

Dive into the details of the TDK InvenSense Partner Program for more insight into teams like Ambiq who are now exclusively using TDK microphones in their development kits.

Introducing the AIR TWS Magnetic Bluetooth Ultra-Slim Earphones are currently the thinnest, custom-designed, concealed clip-on magnetic wireless earphones available in the market, seamlessly fitting onto the back of your mobile phone. Back this project and get an award (The product) Back or bledge mean you will support this project with money to help to create this product to bring it to the world. Or you can back without getting any award. If you truly believe that this project deserves your support and you believe in it ,then don’t hesitate to support and back it. Introduction: How to Back or pledge? How to get the award? Read carefully 1) When you click on the link below, you will find more details about the project, READ CAREFULLY AND UNDERSTAND IT (about the project). 2) Go to the right side of the page, you will find the award section, each award has different details, READ CAREFULLY, click on the one you like. 3) Keep in your mind that each award has different BACK/PLEDGE money amount to support. 4) Follow the introduction in the next page. 5) Add the information card. 6) Your card WILL NOT BE CHARGED until end of the PROJECT DURATION END (28/04/2024). (you will get updated). 7) Your award will be shipped according to the schedule. During and after the project duration time, you can go to comment section and ask the owner any question, and check other backers comments. 9)You can back up without account, it’s optional if you want to create an account in kickstarter to become a backer. 10) You can cancel your back anytime. Link: https://lnkd.in/d46pMdE5 #wirless #music #earphone #earbuds #bluetooth #magnetic #wirlessearbuds

Pink noise from a loudspeaker is recorded by a 4011 from its' backside. Then a guitar body is put in front of the mic perpendicular to the direction of the sound field. Now the sound is reflected back into the front of the mic. This is done twice. The distance between loudspeaker and microphone is 1.5 m (4.9 ft). The distance between guitar body and microphone is 10 cm (3.4 in). This is one of the audio examples in our Mic Uni article on Comb Filtering. Hear the audio and read the full article below. #dpamicrophones #dpamics #microphone #microphones #proaudio #professionalaudio #audioengineering

A neat demonstration of our product Ingress Protection (IP), come rain or shine, your audio will be loud and clear 10/10