Never fail your 5-Yearly lifeboat inspections again
Smart technical superintendents always group ship services during an anchorage stay.
But, managing 5-yearly inspections of lifeboats, davits, and load tests can be challenging.
Yes, the job can be done in 1 day, but technical superintendents should keep these important points in mind when planning:
✔️Davits:
Most importantly, have the davits operated and checked by the crew. Nothing is more annoying than having technicians, load test equipment, etc., all onboard, and the davits are not working.
✔️Divers:
If divers are operating in the area, lifeboat launching is prohibited for their safety.
✔️Bunkering or provisions delivery:
To prevent delays in lifeboat launching, schedule vessel bunkering or provision activities a day before or after the load test if they might interfere with lifeboat operations.
✔️Communication with Classification Society (CS):
Clear communication with the service company and the Classification Society is vital for load test calculations and procedures. Misunderstandings with surveyors can cause time wastage during load tests.
✔️Weather:
Wait for suitable weather and sea conditions for the test, as conducting it in poor conditions can endanger the crew and potentially damage the boat.
And this is how you will NEVER fail your safety inspections when time is tight!
Would you add anything?
~~~~~
I’m Chris, with 18+ years of experience in ship safety services.
Need assistance with 🧯🔥FFE/LSA, lifeboats, calibrations, or bridge electronics?
Drop me a DM to discuss.
#maritime #shipsandshipping #lsa #ffe #lifeboats
Yacht & engineering surveyor, MCA Y3 Chief Engineer, Yachtmaster offshore
2moLeon Griffiths comes with my highest recommendation