Noisecom’s Post

The Noisecom NC3000 Series calibrated coaxial noise sources generate #AWGN from 10 MHz to 110 GHz and are available in standard coaxial #RF connectors. The expansion of the NC3000 Series to 110 GHz meets testing needs while avoiding test bench redesign, enabling a seamless integration into existing coaxial connector-reliant built-in test equipment, calibration, and noise figure measurement systems. https://hubs.la/Q02hdxB-0 #TestAndMeasurement

The Noisecom NC3000 Series calibrated coaxial noise sources generate #AWGN from 10 MHz to 110 GHz and are available in standard coaxial #RF connectors. The expansion of the NC3000 Series to 110 GHz meets testing needs while avoiding test bench redesign, enabling a seamless integration into existing coaxial connector-reliant built-in test equipment, calibration, and noise figure measurement systems. https://hubs.la/Q02rV9r30 #TestAndMeasurement

The Noisecom NC3000 Series calibrated coaxial noise sources generate #AWGN from 10 MHz to 110 GHz and are available in standard coaxial #RF connectors. The expansion of the NC3000 Series to 110 GHz meets testing needs while avoiding test bench redesign, enabling a seamless integration into existing coaxial connector-reliant built-in test equipment, calibration, and noise figure measurement systems. https://hubs.la/Q02rVbP40 #TestAndMeasurement

RG316 Cable With MMCX Connector Pigtail 5.8G MMCX to SMA FPV Antenna #FPVantenna #MMCX #Connector #rf #RG316

Highlighted in everything RF... The P1T-DC40G-65-T-292FF-1NS-OPT18G-50OHM from Quantic PMI (Planar Monolithics) is an SPST Absorptive FET Switch that operates from DC to 18 GHz; handles a CW input power of +17 dBm; provides >55 dB of isolation and has an insertion loss of <5 dB. This switch has a switching speed of 6 ns, a rise time of 1 ns, and a fall time of up to 2 ns and incorporates a TTL-compatible driver for easy system integration. This switch requires a negative DC supply from -8 V to -15 V, a positive DC supply from 8 V to 15 V and consumes <15 mA of current. Available in a Blue Epoxy-polyimide coated module that measures 33.02 mm x 30.48 mm x 12.70 mm with SMA (female) connectors. https://lnkd.in/dcKvnmp8 #rf #rfengineering #microwave

Look what's new Quantic PMI (Planar Monolithics) ... Introducing Model BPF-3D96G-65M-SFF, a cutting-edge bandpass filter designed for exceptional performance. This innovative filter boasts a center frequency of 3.96 GHz, with a passband of 3.9275 to 3.9925 GHz ensures optimal signal clarity. With a maximum insertion loss of 1.4 dB and a maximum VSWR of 1.4:1, it guarantees top-notch efficiency. The compact package size of 1.42" x 0.79" x 0.63" with SMA female connectors makes it a versatile solution for various applications. #QuanticPMI #BandpassFilter #Innovation #RF #RFengineering #microwave

#SMV1405-040LF The SMV1405 to SMV1430 group of silicon abrupt junction varactor diodes is designed for use in Voltage Controlled Oscillators (VCOs) requiring tight capacitance tolerances. The low resistance of these varactors makes them appropriate for high-Q resonators in wireless system VCOs to frequencies above 10 GHz. This family of varactors is characterized for capacitance over temperature. Table 1 describes the various packages and markings of the SMV1405 to SMV1430 group of varactors. Applications High-Q resonators in wireless system VCOs High volume commercial systems Features High Q Low series resistance for low phase noise Packages rated MSL1, 260 °C per JEDEC J-STD-020

In this blog post, discover the differences between high-frequency millimeter wave (mmWave) systems and lower frequency #5G bands, as well as advanced test techniques for optimizing amplifier performance in demanding #mmWave environments. Readers also have access to an excellent resource that reviews how the Nano5G™ Series Automated Impedance Tuners from Maury Microwave integrates into a passive on-wafer load pull measurement system to maximize tuning range, minimize phase skew, and ultimately optimize testing for 5G mmWave designs. https://hubs.la/Q02t3yyZ0 #TestAndMeasurement #LoadPull #PowerAmplifiers #5GSystems

#IR2130D The IR2130D is a high voltage, high speed power MOSFET and IGBT driver with three independent high and low side referenced output channels. Proprietary HVIC technology enables ruggedized monolithic construction. Logic inputs are compatible with 5V CMOS or LSTTL outputs. A ground- referenced operational amplifier provides analog feedback of bridge current via an external current sense resistor. A current trip function which terminates all six outputs is also An open drain FAULT signal indicates if an over current or under voltage shutdown has occurred. The output driver features a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use at high frequencies. The floating channels can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration which operate up to 400 volts.

The SMIQ-134H+ from Mini-Circuits is a MMIC Mixer with an RF/LO frequency from 10 to 30 GHz and an IF frequency from DC to 7 GHz. This mixer has a conversion loss of less than 9.2 dB and provides 35 dBc of image rejection. https://lnkd.in/dGCqWPz2